Category: Triazoles

Related Products of 103755-58-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, molecular formula is C9H9N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: In a two neck flask of 50 mL under nitrogen atmosphere was added KOH (0.64 g, 5 mmol) and tosyl chloride (0.45 g, 2.2 mmol) dissolved in THF (8 mL). The suspension was cooled to 0 C and the required triazole (2 mmol) was added in one portion. The mixture was stirred for 2 h at room temperature. In the end of reaction the aqueous phase was washed with ethyl acetate, the organic phase obtained was dried with MgSO4, filtered and the solvent evaporated under vacuum. The crude product was purified by column chromatography using as eluent a mixture of hexane/ethyl acetate (7/3). (1-(3-Chlorophenyl)-1H-1,2,3-triazol-4-yl)methyl-4-methylbenzenesulfonate (4c): The product was obtained as a white solid in 90% yield:

I am very proud of our efforts over the past few months and hope to (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol help many people in the next few years.

Reference:
Article; Stefani, Helio A.; Canduzini, Hugo A.; Manarin, Flavia; Tetrahedron Letters; vol. 52; 46; (2011); p. 6086 – 6090;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde

General procedure: A solution of 19 (300 mg, 0.70 mmol) in tetrahydrofuran (3 mL) was slowly added to a solution of lithium diisopropylamide (LDA) in heptane/tetrahydrofuran/ethylbenzene (2 M, 0.38 mL, 0.76 mmol) at 78oC, and the resultant solution was stirred at -78oC for 30 minutes. Chlorotitanium triisopropoxide (1 M, 2.8 mL) was then added slowly, and the resulting mixture was stirred at 40oC for 1 hour. The reaction was cooled to -78oC, and propionaldehyde (49 mg, 0.84 mmol) was added slowly. This mixture was then warmed to 40oC, and stirred at 40oC for 2 hours. The reaction mixture was quenched with saturated aqueous ammonium chloride solution (1 mL), diluted with 10 mL of tetrahydrofuran, and treated with Celite for 1 hour. The resultant slurry was filtered and concentrated. The resultant residue was purified by silica gel chromatography (gradient: 95:5 hexanes:ethyl acetate to 65:35 hexanes:ethyl acetate) to provide 20 as a white solid. Yield: 230 mg, 68%.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde, in my other articles.

Reference:
Article; Warmus, Joseph S.; Quinn, Cheryl L.; Taylor, Clarke; Murphy, Sean T.; Johnson, Timothy A.; Limberakis, Chris; Ortwine, Daniel; Bronstein, Joel; Pagano, Paul; Knafels, John D.; Lightle, Sandra; Mochalkin, Igor; Brideau, Roger; Podoll, Terry; Bioorganic and Medicinal Chemistry Letters; vol. 22; 7; (2012); p. 2536 – 2543;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C9H7N3O

L-Proline (1.81 g, 15.6 mmol) was added to a stirring, heterogeneous mixture of 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (13.5 g, 78.0 mmol, Intermediate 45, step a) and 2,2-dimethyl-1,3-dioxane-4,6-dione (11.2 g, 78.0 mmol) in ethanol (520 mL) at 23 C. After 1.5 hours, diethyl 1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate (19.7 g, 78.0 mmol) was added in one portion. After 16 hours, the ethanol was removed by rotary evaporation at 35 C. to afford a yellow solid. Isopropanol (300 mL) was added and the heterogeneous mixture was stirred for 10 minutes at 23 C. The mixture was filtered and the filter cake was washed with isopropanol (150 mL). The solids were collected and dried under vacuum to provide the titled compound as a white solid.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 4-[1,2,4]Triazol-1-yl-benzaldehyde help many people in the next few years.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to 00C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-4 as a yellow solid.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; FLORES, Broc; SCHREIER, John, D.; WO2010/48016; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 21-3 (0.2g, 0.36mMol), HOBT (0.05g, 0.4mMol), and 1H-1,2,3- triazole-4-carboxylic acid (0.05g, 0.4mMol) in anhydrous DMF (2mL) was added DIEA (0.18mL,1. ImMoI) followed by EDC (0.08g, 0.4mMol). The solution was heated in the microwave reactor for 12 minutes at 800C. The solution was then treated with 0.5mL of acetic acid and was heated to 800C in the microwave reactor for and additional 10 minutes. Upon cooling to room temperature, the solution was passed through a syringe filter and purified on a Cl 8 reverse phase HPLC to yield 21-4 as the HCl salt. Mass (M+l) calculated: observed: LC/MS (M+l) calculated: 554.6; observed: 554.3.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 16681-70-2.

Reference:
Patent; MERCK & CO., INC.; WO2006/135627; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 4,5-Dibromo-2H-1,2,3-triazole

The 10.0g (44.1mmol) 4,5- dibromo -2H-1,2,3- triazole (commercially available) was dissolved in 90ml of tetrahydrofuran was added 6.1g (44.2mmol) of potassium carbonate, cooled to -10 , was added 7.5g (53mmol) of methyl iodide.In the 35 ~ 40 to react until the reaction is complete.50ml of water was added, the tetrahydrofuran was distilled off, 90ml and extracted with methyl tert-butyl ether, dried over anhydrous magnesium sulfate, and concentrated to dryness under reduced pressure, the residual solid was added methyl tert-butyl ether, 10ml, 70ml of n-hexane was added slowly, solid precipitation, the addition was completed, stirring at room temperature for 1 to 2 hours.Filtered to give pure 4,5-dibromo-1-methyl -1H-1,2,3- triazole 5.8g, 57% yield.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 4,5-Dibromo-2H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; The Haiya Chemical Co., Ltd.; Jiang, Yueheng; Que, Limin; Xu, Jun; Qin, Dongguang; Cai, Tong; (17 pag.)CN105585534; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5-Phenyl-1H-1,2,4-triazol-3-amine

General procedure: A mixture of 0.57 g (0.002 mol) of compound 4, 0.002 mol of aminotriazole 7a or 7b, and 3 mL of dimethylformamide was refluxed for 2 h. The mixture was cooled, and the precipitate was filtered off and recrystallized from propan-2-ol?DMF.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 4922-98-9

Reference:
Article; Potapov, A. Yu.; Shikhaliev, Kh. S.; Potapov; Prezent; Vandyshev, D. Yu.; Russian Journal of Organic Chemistry; vol. 53; 7; (2017); p. 1060 – 1065; Zh. Org. Khim.; vol. 53; 7; (2017); p. 1047 – 1052,6;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1,2,4-Triazole-3-carboxylic acid

A mixture of lH-1 ,2,4-triazole-3-carboxylic acid (8 mg, 0.07 mmol), EDCI (20 mg, 0.1 mmol), and 1-hydroxybenzotriazole (9 mg, 0.07 mmol) in DMF (1 mL) was slightly warmed up to a homogeneous solution which was added into a stirred solution of 5~(8- azabicyclo [3.2.1 ]octan-3 -yl)-7-(6-phenylpyridin-3 -yl)-2,4-dihydro- 1 H-[ 1 ,3]oxazino[5 ,4- e]pyrazolo[l,5-a]pyrimidine TFA salt (0.07 mmol) and N,N-diisopropylethylamine (37 mu,, 0.2 mmol) in DMF (2mL). It was stirred further for 10 min at room temperature. This crude compound was purified by HPLC to afford (3-(7-(6-phenylpyridin-3-yl)-2,4-dihydro-l FIJI, 3]oxazino[5,4-e]pyrazolo[l,5-a]pyrimidin-5-yl)-8-azabicyclo[3.2. l]octan-8-yl)(4H-l?2,4- triazol-3-yl)methanone. LCMS t = 3.20 Min (10 min run, UV254nm). Mass calculated for M+ H 534.0, observed LC/MS m/z 534.0 (M+H).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 4928-87-4, and we look forward to future research findings.

Reference:
Patent; SCHERING CORPORATION; MENG, Zhaoyang; NAN, Yang; PATEL, Mehul; SIDDIQUI, M. Arshad; REDDY, Panduranga Adulla, P.; SUN, Binyuan; WO2012/27240; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,3-Triazole

To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesium carbonate (89.26 g, 274 mmol), and copper(I) iodide (5.27 g, 27.4 mmol) in DMF (200 mL) were added N,N? -dimethylcyclohexane- 1 ,2-diamine (3.7 mL,23 .3 mmol) and 1H- 1,2,3 -triazole (18.92 g, 274 mmol). The resulting mixture was stirred at 110 C overnight, cooled, concentrated in vacuo, and diluted with water (150 mL). The aqueous layer was extracted withEtOAc (300 mL x 3). The aqueous layer was acidified with 2 N HC1 and extracted with EtOAc(300 ml. x 4). The combined organic layers were washed with brine (150 mL x 3), dried overNa2SO4, filtered, and concentrated in vacuo. The residue was purified by silica gel columnchromatography gel (petroleum ether: EtOAc = 100: 1 5 : 1) to provide the title compound asa solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (50 pag.)WO2016/100162; (2016); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 40253-47-2, name is Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 40253-47-2

To a solution of ethyl 5-methyl-lH-l,2,4-triazole-3-carboxylate (1.0 g, 6.44 mmol) and l-bromo-3-(bromomethyl)benzene (1.77 g, 7.08 mmol) in THF (32 mL), K2CO3 (1.78 g, 12.88 mmol) was added. The mixture was stirred at 50°C for 18 h, and then the reaction was filtered under vacuum. The solvent was removed under reduced pressure and the crude product was purified on a Biotage pre-packed silica gel column (EtOAc:Hexane 12percent to 100percent EtOAc) to afford ethyl l-(3- bromobenzyl)-5-methyl-lH-l,2,4-triazole-3-carboxylate (1.25 g, 60percent) as a viscous oil. MS(ES+) Ci3H14BrN302 requires: 323, 325 found: 324, 326 [M+H]+(l :l).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 40253-47-2, and we look forward to future research findings.

Reference:
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; CARROLL, Christopher, L.; MARSZALEK, Joe; CZAKO, Barbara; JOHNSON, Ryan; THEROFF, Jay; WO2014/31936; (2014); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics