Category: Triazoles

Reference of 956317-36-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of the primary amine, 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid 31 (0.33 g, 1.6 mmol), N,N-diisopropylethylamine(DIPEA, 2.5 mL, 14.7 mmol), and 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(HATU, 0.91 g, 2.4 mmol) in DMF (3.2 mL) was stirredat room temperature for 17 h. The reaction was quenched by theaddition of water, and the mixture was extracted with EtOAc.The organic layer was washed with brine, dried over Na2SO4, filtered,and concentrated under reduced pressure. The resulting residuewas purified by preparative HPLC to obtain the title compound7a as a colorless solid (0.18 g, 28% over 2 steps).

In the meantime we’ve collected together some recent articles in this area about 956317-36-5 to whet your appetite. Happy reading!

Reference:
Article; Futamura, Aya; Nozawa, Dai; Araki, Yuko; Tamura, Yunoshin; Tokura, Seiken; Kawamoto, Hiroshi; Tokumaru, Yuichi; Kakihara, Sora; Aoki, Takeshi; Ohtake, Norikazu; Bioorganic and Medicinal Chemistry; vol. 25; 20; (2017); p. 5203 – 5215;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 4-[1,2,4]Triazol-1-yl-benzaldehyde

Example 94: Preparation of l-(4-Vinylphenyl)-lH-l,2,4-triazole (DI59) To a stirred solution of 4-[l,2,4]triazol-l-yl-benzaldehyde (9.0 g, 52 mmol) in 1,4- dioxane (100 rriL), were added K2CO3 (10.76 g, 78 mmol) and methyl triphenyl phosphonium bromide (22.2 g, 62.4 mmol) at room temperature. The resultant reaction mixture was heated to 70 C for 18 h. After completion of the reaction (TLC), the reaction mixture was cooled to room temperature and filtered and the obtained filtrate was concentrated under reduced pressure. Purification by flash chromatography (Si02, 100-200 mesh; 25-30% EtOAc in petroleum ether) to afforded the title compound as a white solid (5.6 g, 63%): ESIMS m/z 172.09 ([M+H]+).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 27996-86-7

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

EXAMPLE B2-(2H-l,2.3-triazol-2-v0benzoic acid (B- 1)A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF was treated with (1.5 g, 21.7 mmol) 1,2,3-triazole, 7.08 g (21.7 mmol) CsCO3, 1 14 mg (0.60 mmol) CuI and 310 mg (2.17 mmol) trans-N,N’-dimethylcyclohexane-l,2-diamine. The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting desired 2-(2H-l,2,3-triazol-2-yl)benzoyl acid, B-I . Data for IM : 1HNMR (500 MHz, DMSO-(I6) delta 13.05 (br s , IH), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. The undesired 2-(lH-l,2,3-triazol-2-yl)benzoic acid (B-2) eluted second.

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK & CO., INC.; WO2008/143856; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 184177-83-1, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 184177-83-1, name is 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one, molecular formula is C30H35N5O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2-[(l S2S)-l-Ethyl-2-benzyloxypropyl]-2,4-dihydro-4-[4-[4-(4-hydroxyphenyl)-l- piperozinyl] phenyl]-3H-l,2,4-triazol-3-one (1 kg) was added to the Flask along with Dimethylsulfoxide (8 lit) at room temperature and stirred for 15 min. Solution of Sodium hydroxide (0.15 kg) in Water (0.3 lit) was added and maintained for 1 hr and ((3S,5R)-5-((lH-l,2,4-triazol-l-yl) methyl)-5-(2,4-difluorophenyl)- tetrahydrofuran-3-yl)methyl-4-nitrobenzene sulfonate (1.2 kg) was added and maintained for 4-5 hrs. Water (10 lit) was added to the reaction mixture and stirred for 15 min. Ethyl acetate (7.5 lit) was added and stirred for 15 min. Aqueous layer and Ethyl acetate layer were separated and aqueous layer was extracted with Ethyl acetate (3 lit). Aqueous layer and Ethyl acetate layer were separated and total Ethyl acetate layer was washed with Water (5 lit) and brine solution. Ethyl acetate layer was dried with Sodium sulfate and distilled under vacuum at below 50C. The resultant crude was treated with Isopropyl alcohol (10 lit) and heated to 75-80C. The resultant mass was cooled to room temperature, maintained for 2 hrs, filtered the solid and washed with Isopropyl alcohol (1 lit).Yield: 1.3Kg; HPLC: 98.46%.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one.

Reference:
Patent; METROCHEM API PVT LTD.; NANDEPU, Venkateswara Rao; BIJJULA, Venkata krishna Reddy; BATHINA, Satyanarayana; (44 pag.)WO2019/77627; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

To a vial charged with racemic 5-(benzofuran-2-yl)-3 – (5-bromo-6-methoxypyridin-2-yl)-5,6-dthydro-4H- 1 ,2,4-oxadiazine (110 mg, 0.28 mmol, 1.0 equiv.), 3-methyl-1H-1,2,4-triazole (47.1 mg, 0.57 mmol, 2.0 equiv.), and K3P04 (120 mg, 0.57 mmol, 2.0 equiv.) under N2 atmosphere was added degassed 4:1 PhMe:dioxane solvent mixture (2.00 mL). To a second vial charged with Pd2(dba)3 (20.8 mg, 0.02 mmol, 8.0 mol%) and Me4-di-t-BuXPhos (CAS 857356-94-6, 21.8 mg, 0.05 mmol, 16 mol%) under N2 atmosphere was added degassed 4:1 PhMe:dioxane solvent mixture (0.83 mL). This mixture was stirred for 3 minutes at 120 C to provide a dark red solution which was cooled to RT and transferred to the first vial. The reaction was degassed by bubbling with N2 for 5 minutes and then sealed. The reaction mixture was stirred at 120 C for 16 h. The reaction was cooled to RT and filtered through a pad of celite which was washed thoroughly with EtOAc. The filtrate was concentrated, and the residue was purified by normal phase chromatography on silica (0-5% MeOH / DCM) to afford 5-(Benzofuran-2-yl)-3-(6-methoxy-5-(3-methyl-1H- 1,2,4-triazol-1-yl)pyridin-2-yl)-5,6-dthydro-4H-1,2,4-oxadiazine (77.4 mg, 70%) as an off- white solid.

If you are hungry for even more, make sure to check my other article about 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; FORUM PHARMCEUTICALS INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; MCRINER, Andrew, J.; (451 pag.)WO2016/201168; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of n-BuLi (0.3 mL, 0.75 mmol, 2.5 M solution in hexane) was added slowly to a solution of 1-methyl-1H-1,2,3-triazole (65.6 mg, 0.789 mmol) in THF (4 mL) at -45 C. After addition, stirring was continued for an additional 30 minutes at 40 C. and (3-((4-(1H-pyrazol-1-yl)piperidin-1-yl)methyl)-4-chloro-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (189 mg, 0.395 mmol, Intermediate 42) dissolved in THF (2 mL) was slowly added. An additional 1 mL of THF was used to complete the quantitative addition. The mixture was stirred at -40 C. for 5 minutes then warmed to room temperature and stirred for 1 hour. The solution was quenched with saturated aqueous NH4Cl solution. H2O was added and layers were separated. The aqueous layer was extracted with EtOAc and the combined organic extracts washed with brine, dried over MgSO4, filtered, evaporated in vacuo. The crude product was purified using flash column chromatography (0 to 7% MeOH-DCM) to provide the title compound. MS m/e 562.6 (M+H)+.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-65-5, Happy reading!

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 135242-93-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 0.5 g (4.42 mmol, 1.0 eq.) of (l-methyl-li/-l,2,4-triazol-3-yl)methanol (Xlla) in 20 mL of acetonitrile was added 1.07 g (6.63 mmol, 1.5 eq.) of I,G -carbonyl and the mixture was stirred at room temperature for 2 h. Volatiles were removed in vacuo and the residue was resuspend in 20 mL of water. The mixture was extracted with 3 x 50 mL of 5% methanol in methylene chloride. The combined organic extracts were washed with 50 mL of sat. sodium carbonate solution, followed by 50 mL of brine, dried (T^SCL), filtered and the solvent was removed in vacuo to provide 0.77 g of ( 1 -methyl- 1 H- 1 2.4-triazol-3-yl)methyl 1 //-imidazole- 1 -carboxy late (XIHa).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol is helpful to your research.

Reference:
Patent; ARBUTUS BIOPHARMA CORPORATION; KULTGEN, Steven; COLE, Andrew G.; (217 pag.)WO2020/23710; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-[1,2,3]Triazole-4-carboxylic acid

1,2,3-Triazole-4-carboxylic acid (14 mg, 124 mumol), DIPEA (86.3 muL, 496 mumol) and HATU (47.1 mg, 124 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid 2-(2-oxo-pyrrolidin-1-yl)-ethyl ester (52.6 mg, 124 mumol). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product purified by preparative HPLC and lyophilized to yield the title compound (13 mg; purity 95%). MS m/z [M+H]+ calc’d for C28H33N5O5, 520.25. found 520.4.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-[1,2,3]Triazole-4-carboxylic acid, in my other articles.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

l-Methyl-5-tributylstannanyl-lH-[l,2,3]triazole; To a solution of 1 -methyl- lH-[l,2,3]triazole (1.33 g, 16 mmol) in THF (20 mL) at -78 0C, was added dropwise n-BuLi (11 mL,1.6M, 18 mmol). The mixture was stirred at -78 0C for 2 h before addition of Bu3SnCl (4.75 mL, 17.6 mmol). The mixture was stirred at this temperature for 1 h and at r.t. for 1 h. The mixture was concentrated in vacuo and hexanes was added. The insoluble material was removed by filtration and the filtrate was concentrated in vacuo to afford l-methyl-5-tributylstannanyl-lH- [l,2,33triazole (6.12 g, 82% yield) as a yellow syrup.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2006/108591; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 22300-52-3, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The 10.0g (44.1mmol) 4,5- dibromo -2H-1,2,3- triazole (commercially available) was dissolved in 90ml of tetrahydrofuran was added 6.1g (44.2mmol) of potassium carbonate, cooled to -10 , was added 7.5g (53mmol) of methyl iodide.In the 35 ~ 40 to react until the reaction is complete.50ml of water was added, the tetrahydrofuran was distilled off, 90ml and extracted with methyl tert-butyl ether, dried over anhydrous magnesium sulfate, and concentrated to dryness under reduced pressure, the residual solid was added methyl tert-butyl ether, 10ml, 70ml of n-hexane was added slowly, solid precipitation, the addition was completed, stirring at room temperature for 1 to 2 hours.Filtered to give pure 4,5-dibromo-1-methyl -1H-1,2,3- triazole 5.8g, 57percent yield.

In the meantime we’ve collected together some recent articles in this area about 4,5-Dibromo-2H-1,2,3-triazole to whet your appetite. Happy reading!

Reference:
Patent; The Haiya Chemical Co., Ltd.; Jiang, Yueheng; Que, Limin; Xu, Jun; Qin, Dongguang; Cai, Tong; (17 pag.)CN105585534; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics