Category: 7411-23-6

Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7411-23-6

N-chloroethylmorpholine hydrochloride (197 mg, 1.32 mmol), 3,5-dibromo-1H-1,2,4-triazole (250 mg, 1.1 mmol) and potassium carbonate (456 mg, 3.3mmol) were added to DMF (5 mL) in a 25 mL round bottom flask. The reaction was then stirred at 50 C under nitrogen. The solvent was removed in vacuo, water was added, and the product extracted with DCM (3 ¡Á). The organic phase was dried over a phase separator and the solvent removed in vacuo. The product was purified by silica column chromatography eluting with 0-10% MeOH in DCM to yield [4-[2-(3,5-dibromo-1,2,4-triazol-1-yl)ethyl]morpholine (374 mg, 1.1 mmol, 99% yield) ]. UPLC-MS (ES+, Method A), 0.65 min, m/z 341.0 [M+H]+

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7411-23-6, its application will become more common.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., 7411-23-6

To a solution of 3,5-dibromo-lh-l,2,4-triazole (150.0 g, 661.2 mmol) in tetrahydrofuran (1500 mL) was slowly added p-toluenesulfonic acid (17.1 g, 99.2 mmol), followed by 3,4-dihydro-2h-pyran (166.9 g, 1983.6 mmol) at 0 C. After addition, the reaction mixture was heated at 70 C for 3 h and concentrated under reduced pressure. The residue was poured into water (500 mL) and adjusted to pH = 9 by addition of saturated aqueous sodium bicarbonate. The resulting mixture was extracted with ethyl acetate (3 x 400 mL). The combined organic layers were dried over sodium sulfate and concentrated under reduce pressure. The resulting crude product was washed with methanol (2 x 50 mL), dried under reduced pressure to give crude 3,5-dibromo-l-tetrahydropyran-2-yl-l,2,4-triazole (155 g, 75%) as a white solid. NMR (400 MHz, CDCl3) delta 5.49 – 5.46 (m, 1H), 4.12 – 3.99 (m, 1H), 3.72 – 3.61 (m, 1H), 2.38 – 2.26 (m, 1H), 2.18 – 2.07 (m, 1H), 1.98 – 1.90 (m, 1H), 1.78 – 1.60 (m, 3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; PATEL, Snahel; HAMILTON, Gregory; ZHAO, Guiling; CHEN, Huifen; DANIELS, Blake; STIVALA, Craig; (358 pag.)WO2019/12063; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, Name is 3,5-Dibromo-1H-1,2,4-triazole, 7411-23-6, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

To a solution of 3,5-dibromo-1H-1,2,4-triazole (10.0 g, 44.1 mmol) in DMF (75 mL) and potassium carbonate (12.2 g, 88.2 mmol) was added iodomethane (3.02 mL, 48.5 mmol) in one portion. This gave rise to a strong exotherm from 17 C to 38 C after one minute. The reaction mixture was stirred overnight, diluted with 150 mL of EtOAc and then filtered to remove most of the inorganics. The solvent was removed under reduced pressure and the resultant yellow oily solid was partitioned between EtOAc (250 mL) and water (100 mL) and the aqueous washed with EtOAc (150 mL). The combined organics were washed with washed with brine (50 mL), dried over magnesium sulfate, filtered and the solvent removed in vacuo to give 3,5-dibromo-1-methyl-1,2,4-triazole (6.2 g, 25.8 mmol, 58% yield) as a yellow solid. UPLC-MS (ES+, Method A): 1.79 min, m/z 241.7 [M+H]+.1H NMR (400 MHz, DMSO-d6) delta 3.83 (3H).

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 7411-23-6

To a solution of 3,5-dibromo-1H-1,2,4-triazole (10 g, 44.1 mmol) in acetonitrile (100 mL) was added 2-(2-bromoethoxy)tetrahydro-2H-pyran (8.0 mL, 52.9 mmol) and N,N-diisopropylethylamine (8.45 mL, 48.5 mmol). The mixture was stirred at 90 C. for 3 h and concentrated under reduced pressure. The residue was diluted with ethyl acetate (300 mL), washed saturated sodium bicarbonate (2*50 mL), brine (2*50 mL), dried over sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography (silica gel, 100-200 mesh, 0 to 20% ethyl acetate in petroleum ether) to afford 3,5-dibromo-1-(2-tetrahydropyran-2-yloxyethyl)-1,2,4-triazole (13 g, 83%) as a colorless oil, used as is in the next step.

Statistics shows that 7411-23-6 is playing an increasingly important role. we look forward to future research findings about 3,5-Dibromo-1H-1,2,4-triazole.

Reference:
Patent; Genentech, Inc.; Patel, Snahel; Hamilton, Gregory; Zhao, Guiling; Chen, Huifen; (100 pag.)US2018/153831; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

NaH (60 % dispersion in mineral oil; 5.29 g, 132 mmol) was added to a stirred solution of 3,5-dibromotriazole (20.0 g, 88.2 mmol) in DMF under an atmosphere of N2 at r.t.. After 30 min, 2-iodopropane (10.6 ml, 106 mmol) was slowly added and the r.m. was heated at 40 C for 2-3 h. The content was carefully poured onto ice/H20 (1 1), and the mixture was extracted with DIPE. The combined organic extracts were washed with H20 (4 x 200 ml), then with brine and dried (Na2S04). Filtration and concentration under reduced pressure yielded a yellow oil. Yield: 16.50 g of intermediate 24 (70 %).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; VAN BRANDT, Sven, Franciscus, Anna; DE CLEYN, Michel, Anna, Jozef; GIJSEN, Henricus, Jacobus, Maria; BERTHELOT, Didier, Jean-Claude; SURKYN, Michel; WO2011/86099; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

In a 250 mL round bottomed flask, 3,5-dibromo-1H-1,2,4-triazole (Int-1, 2.00 g, 8.82 mmol) was dissolved in DMF (60 mL) and potassium carbonate (2.72 g, 19.5 mmol) was added. The resulting suspension was stirred for 20 min at room temperature. Then, 2,2-difluoroethyl trifluoromethanesulfonate (2.08 g, 1.29 mL, 9.7 mmol) was added and the reaction mixture was stirred for 6 h at room temperature. After that, it was concentrated in vacuo, the residue was diluted with MTBE (100 mL) and ice water (100 mL), the aqueous phase was extracted with MTBE (3 x 100 mL). The combined organic layers were washed with water (2 x 100 mL) and brine (1 x 100 mL), dried (sodium sulfate) and concentrated in vacuo. The resulting crude product, a white solid, was used in the next step without further purification (2.402 g, 94 %). HPLC (method LCMS_fastgradient) tR = 0.88 min. 1H NMR (CDCl3, 300 MHz): delta 4.52 (dt, J = 4.2, 12.6 Hz, 2 H), 6.16 (tt, J= 4.2, 54.8 Hz, 1 H). MS (ES+) m/z 289.9, 291.9, 293.9 [M+H, 2 Br isotopes] .

The synthetic route of 3,5-Dibromo-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., 7411-23-6

In a 250 mL round bottomed flask sodium hydride (60% dispersion in mineral oil) (264 mg, 6.61 mmol) was added to a colorless solution of 3,5-dibromo-lH-l,2,4-triazole (lnt-1, 1 g, 4.41 mmol) in DMF (22 ml). The resulting suspension was stirred at room temp during 30 min and 1,1,1,3,3,3-hexadeuterio-2-bromopropane (683 mg, 5.29 mmol) was added and the reaction was stirred at 40C over night.The reaction mixture was poured into 50 mL H20 and extracted with EtOAc (3 x 50 mL). The organic layers were washed with sat NaCl (3 x 50 mL), dried over MgS04 and concentrated in vacuo. The title compound was isolated as a colourless liquid (644 mg, 2.34 mmol, 53.1 % yield). MS (ES+) m/z 275.9 [(M+H)+].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, Name is 3,5-Dibromo-1H-1,2,4-triazole, 7411-23-6, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

A mixture of 3,5-dibromo-1H-1,2,4-triazole (700 mg, 3.1 mmol), 2,2′-bipyridyl (60 mg, 0.39 mmol), copper(II) acetate (140 mg, 0.77 mmol), potassium carbonate (852 mg, 6.2 mmol) and cyclopropylboronic acid (795 mg, 9.3 mmol) was dissolved in toluene (5 mL) and water (1.5mL) and stirred at 70 C for 18 h. The reaction mixture was cooled to RT, quenched with NH4Cl (sat. aq.) and the products extracted in DCM. The combined organic fractions were dried with a phase separator and reduced in vacuo. The crude mixture was dissolved in DCM and dry-loaded onto silica. Purification via silica column chromatography eluting with 10-60% EtOAc in Pet. Ether afforded 5-dibromo-1-cyclopropyl-1,2,4-triazole and 1-allyl-3,5-dibromo-1,2,4-triazole (123 mg, 0.46 mmol, 15% yield) as an inseparable mixture. UPLC-MS (ES+, Method A): 1.52 min, m/z 267.9 [M+H]+

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. 7411-23-6

Intermediate 4 3,5-Dibromo-l-methyl-lH-l,2,4-triazole To a solution of 3,5-dibromo-lH-l,2,4-triazole (1.0 g, 4.41 mmol) in DMF (9 mL) sodium tert- pentoxide (0.485 g, 4.41 mmol) was added and the mixture was stirred for 10 min at rt under nitrogen atmosphere, lodomethane (0.29 mL, 4.63 mmol) was added and the mixture was stirred at 40C for 2 hours. The mixture was poured onto water and extracted twice with diisopropylether. The organic phase was washed with water (2x), brine and dried over sodium sulfate. The solvents were evaporated to give the title compound as a solid (0.83 g, 78%).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; NORDVALL, Gunnar; MACSARI, Istvan; MALMBORG, Jonas; WO2014/195321; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, Name is 3,5-Dibromo-1H-1,2,4-triazole, 7411-23-6, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

EXAMPLE 1Preparation of 2-(3,5-dibromo-1H-1,2,4-triazol-1-yl)-1-(2,4-difluorophenyl)ethan-1-oneFirst, 43.7 g of 3,5-dibromo-1H-1,2,4-triazole is introduced into 200 mL of tetrahydrofuran (THF), the resultant mixture is agitated, and 40.4 g of 2-chloro-2,4-difluoroacetophenone is further introduced thereto. Next, 36.3 g of potassium carbonate is introduced to the reaction mixture and the resultant mixture is agitated for 7 hours at room temperature. After the completion of the reaction, the reaction mixture is filtered, washed with 100 mL of tetrahydrofuran (THF), and concentrated at room temperature. Then, 437 mL of purified water is introduced so that the crystals are slurried, followed by filtering. The filtered crystals are reslurried in 175 mL of isopropanol and filtered again. The crystals are washed with 44 mL of isopropanol and dried with hot air at 50 C. to obtain 63.8 g of the title compound as a white solid (yield 87%, purity 99.2%, HPLC, detected at a wavelength of 256 nm, 18C 4.6¡Á250 mm, mobile phase 60% ACN, flow rate 1 mL/min).1H-NMR (200 MHz, CDCl3) delta (ppm): 8.118.03(1H), 7.11-6.96(2H), 5.51(2H).

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Patent; Dongkook Pharmaceutical Co., Ltd.; US2013/5973; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics