Category: 7170-01-6

Application of 7170-01-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows.

Example 4; Preparation of Compound C’ from Compound B’ (Example 2); Compound B’ (60.00 g, 0.274 mol) (prepared as in Example 2) was added in portions to a melt of 3-methyl-1,2,4-triazole (113.8 g, 1.369 mol) under argon at 110-120 C. The mixture was heated to about 143 C. and the resulting solution was stirred at 142-44 C. for 17 h. After cooling to 120 C., 1-methyl-2-pyrrolidinone (NMP) (60 mL) was added quickly. The solution was further cooled to about 95 C. and water (300 mL) was added slowly (about 30 min.) keeping the temperature at 85 and 95 C. resulting in crystallization of the product. The slurry was cooled slowly to 0-5 C. and held for about 1 h. The cold slurry was filtered and the cake washed with cold H2O (2¡Á75 mL) then dried in vacuo at 55 C. for 16 h affording 34.5 g Compound C’ as a crystalline, tan solid (54.9%), HPLC AP 98.2. If necessary, the product could be further purified by recrystallization from ethyl acetate. 1H NMR (400 MHz, CDCl3) delta 2.55 (s, 3H), 4.05 (s, 3H), 6.73 (dd, 1H, J=2.9, 2.6), 7.42 (dd, 1H, J=2.9, 2.8), 7.57 (s, 1H), 9.16 (s, 1H), 10.29 (bs, 1H). Anal. Calcd for C11H11N5O: C, 57.63; H, 4.84; N, 30.55. Found: C, 57.37; H, 4.74; N, 30.79.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Bristol-Myers Squibb Company; US2006/293304; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Example 48 b. 3-methyl-l-(4-nitrophenyl)-lH-l,2,4-triazole3-methyl-lH-l,2,4-triazole (648 mg, 7.8 mmol) and potassium carbonate (2.0 g, 14.2 mmol) were added to a solution of l-fluoro-4-nitro-benzene (1.0 g, 7.1 mmol) in DMF (10 mL). The reaction mixture was heated in a sealed tube at 800C overnight, cooled to room temperature and filtered through a pad of Celite. The solids were washed with dichloromethane and the filtrate was concentrated under reduced pressure. The residue was taken in water and the resultant precipitate was collected by filtration, washed with water and dried under high vacuum to afford 950 mg of the title compound (67 % Yield). 1H NMR (400 MHz, CHLOROFORM-d) delta ppm 2.51 (s, 3 H) 7.83 -7.89 (m, 2 H) 8.36 – 8.41 (m, 2 H) 8.58 (s, 1 H). MS m/z: 205 [M+l]+ .

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; LO-ALFREDSSON, Yvonne; PAULSEN, Kim; RAKOS, Laszlo; ROTTICCI, Didier; WALDMAN, Magnus; WO2010/132015; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows. category: Triazoles

A mixture of 1.66 g (20 mmol) of 3-methyl-1,2,4-triazole and 16.6 ml of tetrahydrofuran was added dropwise, and 2.29 g (10 mmol) of pure 2-bromoisobutyryl bromide was added dropwise over 30 minutes, The mixture was further stirred for 2 hours, filtered and the insoluble material was filtered off and the filtrate was concentrated to dryness under reduced pressure. 5 ml of methyl tert-butyl ether was added, stirred for 30 minutes, filtered, and the cake was dried to obtain 2.09g of product, yield 90%.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Ningbo Baisijia Pharmaceutical Technology Co., Ltd.; Jin Chunhua; Tang Jianbo; Wang Kedi; Zhu Qinfeng; (13 pag.)CN106866558; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Safety of 3-Methyl-1H-1,2,4-triazole

Example 23a 5-(3-Methyl-1H-1,2,4-triazol-1-yl)pyridin-2-amine CuI (285 mg, 20 mol %), L-proline (345 mg, 40 mol %) and potassium carbonate3 (2.07 g, 15.00 mmol) were added to a solution of 5-bromo-pyridin-2-ylamine (CAS 1072-97-5, 1.30 g, 7.50 mmol) and 3-methyl-1H-[1,2,4]triazole (CAS 7170-01-6, 935 mg, 11.3 mmol) in anhydrous DMSO (5 mL). The reaction mixture was heated at 120 C. for 5 days, cooled to r.t., diluted with DCM and filtered through a pad of Celite. The filtrate was concentrated under reduced pressure and the residue was purified by a reversed phase purification (C18-column) using stepped gradients of 20 to 50% MeOH in water (containing 1% NH4OH) to give the title product (153 mg, 12%). 1H NMR (400 MHz, MeOD) delta ppm 2.41 (s, 3H) 6.67 (d, 1H) 7.75 (dd, 1H) 8.24 (d, 1H) 8.72 (s, 1H). MS (ES) m/z 176.2 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; US2012/122843; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

A mixture of 3-methyl-lH-l,2,4-triazole (5.0 g, 60.2 mmol), 1- chloro-2-methoxy-4-nitrobenzene (11.3 g, 60.2 mmol), and KOH flakes (3.4 g, 48.1 mmol) in anhydrous DMSO (50 mL) was heated at 80 0C for 6 h. The reaction mixture was allowed to cool to rt and was poured into 800 mL of water with vigorous stirring. The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organics were washed with brine, dried over Na2SO4, filtered and concentrated in vacuo. The crude residue was purified using silica gel chromatography (0-2% MeOH/chloroform, linear gradient) to afford l-(2-methoxy-4- nitrophenyl)-3-methyl-lH-l,2,4-triazole (3.7 g, 26 % yield). LC-MS (M+H)+ = 235.2.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MARCIN, Lawrence, R.; THOMPSON, Lorin, A., III; BOY, Kenneth, M.; GUERNON, Jason, M.; HIGGINS, Mendi, A.; SHI, Jianliang; WU, Yong-Jin; ZHANG, Yunhui; MACOR, John, E.; WO2010/83141; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) 1-(2-Methoxy-4-nitro-phenyl)-3-methyl-1H-[1,2,4]triazole; A solution of 2-chloro-5-nitroanisole (1.0 g, 5.2 mmol), 3-methyl-1H-1,2,4-triazole (1.74 g, 20.9 mmol) and potassium hydroxide (0.44 g, 7.8 mmol) in dimethyl sulfoxide (5 ML) was heated to 80 C. under an atmosphere of nitrogen for two days. Water and 1M aqueous hydrogen chloride solution was added and the reaction was stirred for 45 minutes. The precipitate was filtered off, washed with water, dissolved in dichloromethane. The aqueous layer was extracted twice with dichloromethane. The combined organic layers were washed with water, dried over sodium sulfate, filtered and the solvent was evaporated. The residue was purified by reversed preparative HPLC using acetonitril/water (0.1% formic acid) to yield the title compound as a yellow solid (77 mg, 6%). MS ISP (m/e): 235.2 (100) [(M+H)+]. 1H NMR (CDCl3, 300 MHz): delta (ppm)=8.88 (s, 1H), 8.10 (d, 1H), 7.96-8.02 (m, 2H), 4.10 (s, 3H), 2.51 (s, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Baumann, Karlheinz; Flohr, Alexander; Goetschi, Erwin; Jacobsen, Helmut; Jolidon, Synese; Luebbers, Thomas; US2009/215759; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, These common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 4-fluorobenzaldehyde (3.63 g) and 3-methyl-lH-l,2,4-triazole (2.92 g; prepared according to US 2006/293304) in dry DMF (35 mL) was added K2C03 (24.25 g) at rt. The reaction mixture was stirred at 120C overnight, then cooled to rt and diluted with EA and water. The aq. layer was extracted with EA (2x) and the combined org. layers were washed with water and brine, dried over MgS04, filtered and concentrated under reduced pressure. The title compound was obtained, after purification by CC (Hept/EA 80:20 to 50:50), as a yellow solid (36% yield).1H NMR (CDCls) delta: 10.06 (s, 1H); 8.58 (s, 1H); 8.04 (d, J = 8.0 Hz, 2H); 7.88 (d, J = 8.0 Hz, 2H); 2.53 (s, 3H).

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BUR, Daniel; GUDE, Markus; HUBSCHWERLEN, Christian; PANCHAUD, Philippe; WO2011/121555; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, SDS of cas: 7170-01-6

DMF (1.5 ml) was added to a mixture of methyl 3-iodo-6-methyl-2-pyridinecarboxylate D44 (100 mg), 3-methyl-1H-1,2,4-triazole (45.0 mg, 0.541 mmol), (1R,2R)-N,N’-dimethyl-1,2-cyclohexanediamine (10.27 mg, 0.072 mmol), copper(I) trifluoromethanesulfonate benzene complex (9.08 mg, 0.018 mmol) and cesium carbonate (235 mg, 0.722 mmol) in a screw-topped vial. The mixture was degassed via 3 vacuum/nitrogen cycles and heated with shaking to 120 C. for 90 minutes. The reaction mixture was evaporated to dryness under reduced pressure. The residue was dissolved in water/MeOH (1:1, 3 ml) and acidified to pH=2 by addition of 2 M HCl solution. The resulting mixture was evaporated to dryness under reduced pressure then the residue was triturated with DCM/MeOH (3:1, 5 ml). The mixture was filtered washing with more DCM/MeOH (3:1, 5 ml). The filtrate was treated with trimethylsilyldiazomethane solution (2 M in hexanes, 2 ml, 4 mmol) to re-esterify the acid. The reaction mixture was evaporated under reduced pressure and the residue was purified by flash chromatography on silica gel (Biotage Snap 2¡Á10 g columns in series, EtOAc/Cy from 50/50 to 100/0) to give the title compound D84 (48 mg) as a colourless solid. UPLC (Acid FINAL_QC_POS): rt=0.45 minutes, peak observed: 233 (M+1). C11H12N4O2 requires 232. 1H NMR (400 MHz, CDCl3) delta ppm 2.52 (s, 3H) 2.73 (s, 3H) 3.91 (s, 3H) 7.47 (d, 1H) 7.81 (d, 1H) 8.32 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ALVARO, Giuseppe; Amantini, David; Castiglioni, Emiliano; Di Fabio, Romano; Pavone, Francesca; US2010/144760; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C3H5N3

A mixture of 3 -methyl- IH-1, 2,4-triazole (5.0 g, 60.2 mmol), l-chloro-2-methoxy- 4-nitrobenzene (11.3 g, 60.2 mmol), and KOH flakes (3.4 g, 48.1 mmol) in anhydrous DMSO (50 mL) was heated at 80 0C for 6 h. The reaction mixture was allowed to cool to rt and was poured into 800 mL of water with vigorous stirring. The aqueous mixture was extracted with EtOAc (3 x 200 mL). The combined organics were washed with brine, dried over Na2SO4, filtered and concentrated in vacuo. The crude residue was purified using silica gel chromatography (0-2% MeOH/chloroform, linear gradient) to afford l-(2- methoxy-4-nitrophenyl)-3 -methyl- 1 H- 1,2,4-triazole (3.7 g, 26 % yield). LC-MS (M+H)+ = 235.2.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BOY, Kenneth M.; GUERNON, Jason M.; MACOR, John E.; OLSON, Richard E.; SHI, Jianliang; THOMPSON, III, Lorin A.; WU, Yong-Jin; XU, Li; ZHANG, Yunhui; ZUEV, Dmitry S.; WO2011/14535; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6,Some common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of CuI (190mg, 1mmol), 4-methyl-1H-imidazole (1.64g, 20mmol), Cs2CO3(3.25g, 10mmol), 3-bromo-5-(trifluoromethyl)aniline (2.40g, 10 mmol), 1-(5,6,7,8-tetrahydroquinolin-8-yl)ethanone (350mg, 2mmol) and DMF (30mL) was added to a bottom, the bottom was evacuated and backfilled with argon (this procedure was repeated three times), then the mixture was heated to 130 C for 24 h under argon. After cooling to room temperature, the solvent was removed under vacuum and the residue was purified by column chromatography on silica gel to afford the crude product. The crude product was recrystallized as a white solid (1.7 g, 71%)

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Deping; Zhang, Zhang; Lu, Xiaoyun; Feng, Yubing; Luo, Kun; Gan, Jirong; Yingxue, Liu; Wan, Junting; Li, Xiang; Zhang, Fengxiang; Tu, Zhengchao; Cai, Qian; Ren, Xiaomei; Ding, Ke; Bioorganic and Medicinal Chemistry Letters; vol. 21; 7; (2011); p. 1965 – 1968;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics