Category: 7170-01-6

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., COA of Formula: C3H5N3

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, category: Triazoles

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Methyl-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%). :_Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3-Methyl-1H-1,2,4-triazole

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Safety of 3-Methyl-1H-1,2,4-triazole

2-(5-Bromo-1-methyl-1H-imidazol-2-yl)-6-chloro-3-(ethylsulfonyl)pyridine (200 mg, 0.55 mmol, 1.0 eq) was dissolved in 42 dimethylformamide (5 ml), and 50% 41 sodium hydride (32 mg, 0.66 mmol, 1.1 eq) was added. Subsequently, the mixture was cooled to 0 C. 70 3-methyl-1H-1,2,4-triazole (50 mg, 0.61 mmol, 1.1 eq) was added thereto, and then stirred overnight at room temperature. The aforementioned reaction solution was added to a saturated aqueous solution of 48 sodium hydrogen carbonate, and extraction with ethyl acetate was carried out. The obtained organic layer was washed with water and a saturated aqueous solution of 24 sodium chloride, dried over anhydrous magnesium sulfate, and filtered. The filtrate was concentrated under reduced pressure, and the obtained residue was purified by column chromatography with silica gel. Thereby, the objective 71 product was obtained in an amount of 91 mg (yield 40%).1H-NMR of the obtained objective product is shown below. 1H-NMR (400 MHz, CDCl3) delta: 9.04 (1H, s), 8.61 (1H, d), 8.07 (1H, d), 7.17 (1H, s), 3.84 (2H, q), 3.65 (3H, s), 2.53 (3H, s), 1.35 (3H, t).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Nippon Soda Co., Ltd.; SAKANISHI, Keita; IWASA, Takao; AOYAMA, Hikaru; SAKIYAMA, Norifumi; USHIJIMA, Daisuke; MATSUI, Maki; KOBAYASHI, Tomomi; US2019/185459; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Computed Properties of C3H5N3

4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile and 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture was stirred at 22 C. for 18 h. The solid was then filtered and the filtrate was concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, dried over anhydrous magnesium sulfate and concentrated. The mixture containing the 2 and 4-triazolyl-benzonitriles was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and on reversed phase silica gel to give 1.86 g (18% yield) of 4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile and 0.526 g (5% yield) of 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. 4-Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate/hexanes). mp 117-118 C. 1HNMR 400 MHz (CDCl3) delta (ppm): 2.54 (3H, s, CH3), 7.24 (1H, m, CH), 7.62 (1H, dd, J=2.5 Hz and J=9.1 Hz, CH), 7.84 (1H, dd, J=5.6 Hz and J=8.6 Hz, CH), 8.82 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.25; H, 3.32; N, 27.81. 4-fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane). mp 120-121 C. 1HNMR 400 MHz (CDCl3) delta (ppm): 2.56 (3H, s, CH3), 7.30 (1H, dd, J=2.5 Hz and J=8.1 Hz, CH), 7.39 (1H, m, CH), 7.91 (1H, dd, J=5.5 Hz and J=8.6 Hz, CH), 8.06 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71. Found: C, 59.35; H, 3.70; N, 27.77.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/129379; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows.

Step 1. Preparation of 3-methyl-1-(4-nitrophenyl)-1H-1,2,4-triazole A mixture of 1-fluoro-4-nitrobenzene (1.54 g, 10.9 mmol), 3-methyl-1H-1,2,4-triazole (1.00 g, 12.0 mmol) and K2CO3 (1.66 g, 12.0 mmol) in DMF (30 ml) was stirred at 75 C. for 12 hours. After being cooled to room temperature, the reaction mixture was concentrated in vacuo. The mixture was dissolved in EtOAc, washed with saturated aq. NaHCO3, dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on SiO2 (Hex:EA=2:1) to give the desired product (0.500 g, 22%) as a brown solid. 1H NMR (400 MHz, CDCl3) delta 2.52 (3H, s), 7.85-7.88 (2H, m), 8.37-8.40 (2H, m), 8.58 (1H, s). LC-MS m/z=205.0 [M+H]+.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CHEMIZON, A DIVISION OF OPTOMAGIC CO., LTD.; US2012/53180; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-1,2,4-triazole (0.45 g). After hydrogen gas evolution ceased, 4-fluoro-2-trifluoromethyl-phenyl-(5H,11H-pyrrolo[2,1-c][1,4]benzodiazepine-10-yl)-methanone (1.76 g) was added and the reaction mixture was heated in a sand bath at 110 C. for 18 hours. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 0.81 g of the title compound as colorless crystals, m.p. 148-150 C., MS m/z: 438.2 (M+H)+, 875.8 (2M+H)+.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; American Cyanamid Company; US6831079; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 3-Methyl-1H-1,2,4-triazole

CuI (1.71 g, 8.9 mmol) and N,N’-dimethylethylenediamine (1.91 ml, 17.92 mmol) were added to a mixture of 2-amino-5-iodopyridine (5.03 g, 22.4 mmol), 3 -methyl- IH- 1,2,4- triazole (2.42 g, 29.1 mmol) and Cs2CO3 (14.60 g, 44.81 mmol) in DMF (40 ml). The r.m. was heated at 110 0C for 7 h., the r.m. was cooled, EtOAc was added and the mixure was washed with H2O. The H2O layer was extracted 5 times with EtOAc. The combined organic layers were dried (MgSO4), filtered and the solvent was evaporated in vacuo. The residue was purified by RP preparative HPLC [RP Shandon Hyperprep C18 BDS (8 mum, 250 g, LD. 5 cm); mobile phase: a gradient of (0.25 % NH4HCO3 solution in H2O)/MeOH/CH3CN]. The product fractions were collected and the solvent was evaporated. Yield: 1.5 g of intermediate 56 (38 %). –

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; GIJSEN, Henricus, Jacobus, Maria; MACDONALD, Gregor, James; BISCHOFF, Francois, Paul; TRESADERN, Gary, John; TRABANCO-SUAREZ, Andres, Avelino; VAN BRANDT, Sven, Franciscus, Anna; BERTHELOT, Didier, Jean-Claude; WO2010/70008; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, These common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 212.1 : To a solution of 3-methyl-1H-1,2,4-triazole (1 g) in MeCN (40ml) was added Cs2CO3 (3.72g) followed by benzyl bromoacetate (1.89ml_). The reaction mixture was stirred at RT for 1 h and evaporated to dryness. The residue was taken up in EA and washed with water, sat. NH4Cl and brine. The aq. layers were extracted with EA, the combined org. layers were dried (MgSO4), filtered off and evaporated in vacuo. The residue was purified by CC (Biotage, SNAP 100g cartridge, solvent A: DCM; solvent B: DCM/MeOH 8/2; gradient in %B: 15 for 12CV, 15 to 25 over 2CV, 25 for 3CV) to afford 2.23g of oil. The oil was purified by preparative chiral HPLC (II) to afford the two regioisomers, both as mixture of benzyl and ethyl ester that formed during the evaporation of the fractions after HPLC purification. The second eluting compound also contains the methyl ester analog due to the addition of MeOH to the fractions before evaporation. First eluting compound: (5-Methyl-[1,2,4]triazol-1-yl)-acetic acid benzyl ester (1.07g, brown oil, contains 16% of the ethyl ester analog). LC-MS (B): tR = 0.68min; [M+H]+: 232.16. 1H-NMR (CDCl3): 7.83 (s, 1 H); 7.40-7.33 (m, 5H); 5.23 (s, 2H); 4.93 (s, 2H); 2.43 (s, 3H). Roesy signal seen between CH2 at 4.93 ppm and CH3 at 2.43 ppm. Second eluting compound: (3-Methyl-[1,2,4]triazol-1-yl)-acetic acid benzyl ester (1.15g, yellow oil, contains 30% of the ethyl ester and 20% of the methyl ester analogs). LC-MS (B): tR = 0.67min; [M+H]+: 232.16. 1H-NMR (CDCl3): 8.05 (s, 1 H); 7.40-7.30 (m, 5H); 5.23 (s, 0.95H, CH2 of benzyl ester); 4.93-4.88 (3s, 2H); 4.27 (q, 0.58H, CH2 of ethyl ester); 3.81 (s, 0.65 H, CH3 of methyl ester); 2.42 (s, 3H). Roesy signal seen between CH at 8.05ppm and CH2 at 4.93-4.88ppm.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; CAROFF, Eva; KELLER, Marcel; KIMMERLIN, Thierry; MEYER, Emmanuel; WO2013/114332; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics