Category: 7170-01-6

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

To a mixture of l-fluoro-2-nitrobenzene (1 mL, 12.8 mmol, 1.0 equiv.) and 3-methyl- lH-l,2,4-triazole (1.27 g, 15.3 mmol, 1.2 equiv.) in acetonitrile (20 mL) was added potassium carbonate (5.29 g, 38.3 mmol, 3.0 equiv.) and the mixture was stirred at 60C for 12 hours. The mixture was cooled to 20C, diluted with ethyl acetate (20 mL) and filtered. The filtrate was concentrated under reduced pressure to give a residue which was purified by silica gel chromatography (petroleum ether: ethyl acetate 2: 1 to 1 : 1) to give the desired product as a light yellow solid (1.20 g, 46%); 1H NMR (DMSO-d6, 400 MHz) delta 8.96 (s, 1H), 8.12 (d, 71H), 7.90 – 7.88 (m, 1H), 7.86 – 7.84 (m, 1H), 7.60 (t, 7 = 8.0 Hz, 1H), 2.31 (s, 3H).

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SHIRE HUMAN GENETIC THERAPIES, INC.; MILLER, Thomas; PAPAIOANNOU, Nikolaos; (243 pag.)WO2018/144620; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) 1-(2-Fluoro-4-nitro-phenyl)-3-methyl-1H-[1,2,4]triazole; 3,4-Difluoronitrobenzene (514 mg, 3.23 mmol), 3-methyl-1H-1,2,4-triazole (325 mg, 3.72 mmol) and di-potassium hydrogen phosphate trihydrate (1.49 g, 6.46 mmol) in 1 dimethyl sulfoxide (5 mL) were stirred for 6 hours at 70 C. The mixture was concentrated in vacuo; the residue was diluted with water and extracted three times with ethyl acetate. The combined organic layers were washed four times with water, twice with brine, dried over magnesium sulfate and evaporated. Column chromatography (30 g silica, heptane/ethyl acetate 1:1 v/v) afforded the title compound (261 mg, 36%) as white crystals MS ISP (m/e): 223.3[(M+H)+]. 1H NMR (CDCl3, 300 MHz): delta (ppm)=8.72 (d, 1H), 8.20 (m, 3H), 2.52 (s, 3H). Mp 105-107 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Baumann, Karlheinz; Flohr, Alexander; Goetschi, Erwin; Jacobsen, Helmut; Jolidon, Synese; Luebbers, Thomas; US2009/215759; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 7170-01-6

General procedure: General method for preparation of all presented compounds is described below. Completion ofthe reactions was determined by TLC with bromocresol green solution as a stain.10 mmol of the appropriate azole (1H-1,2,4-triazole, 3-methyl-1H-1,2,4-triazole,3,5-dimethyl-1H-1,2,4-triazole, 1H-tetrazole or 5-methyl-1H-tetrazole) and 10 mmol of 1-adamantanecarboxylic acid were placed in 20 mL screwcap vial and dissolved in 10 mL of 98% concentratedsulfuric acid. The mixture was cooled to 0 C using an ice bath. After cooling, 10 mmol (1010mg) of potassium nitrate were added in small portions over the period of 30 min. Once all of thenitrate has been added, the ice bath was removed, and the mixture was stirred for another 4 h atroom temperature. After 4 h of stirring, reaction mixture was poured on 100 g of crushed ice withshaking and allowed to stand until it reached room temperature. Quenched mixture was filtered andneutralized with saturated NaHCO3 solution. Precipitate was filtered, washed with copious amountsof distilled water and dried in vacuum desiccator. Products are suciently pure for the synthesis ofcoordination compounds, but for the analysis the small portions of each compound were recrystallizedfrom the mixture of water/MeOH (9:1).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7170-01-6.

Reference:
Article; Pavlov, Dmitry; Sukhikh, Taisiya; Filatov, Evgeny; Potapov, Andrei; Molecules; vol. 24; 15; (2019);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

2- [6-Chloro-3- (ethanesulfonyl) pyridin-2-yl] -3-methyl-6 – [(trifluoromethyl) sulfanyl]-3H-imidazo [4,5-b] pyridine 200 mg, 60% sodium hydride (oily) 30 mg, and a mixture of 2 mL of DMF, was added under ice-cooling 3-methyl-1H-1,2,4-triazole 47 mg. After the mixture was stirred under ice-cooling for 2.5 hours, a saturated aqueous solution layer was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The organic layer was washed with water, and saturated brine, and dried with anhydrous sodium sulfate. The resulting organic layer was dried under reduced pressure. The resulting residue was subjected to silica gel chromatography, the compounds of the present invention beta36 referred to below was obtained 120mg.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; NAKAJIMA, YUJI; OKAWARA, YUICHI; (263 pag.)JP2016/102104; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

Example 41 b. l-(2-methoxy-4-nitrophenyl)-3-methyl-lH-l,2,4-triazoleA mixture of 3-methyl-lH-[l,2,4]triazole (2.4 g, 29.21 mmol), l-fluoro-2-methoxy-4- nitrobenzene (5.0 g, 29.21 mmol) and potassium carbonate (8.06 g, 58.42 mmol) in DMF (50 mL) was heated overnight at 85C in a pressure vessel. The reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was suspended in water and the mixture extracted with dichloromethane. The organic extracts were combined, washed with brine, dried over anhydrous Na2SO4, filtered and concentrated. The residue was dissolved in dichloromethane (50 mL) and hexane was added in small portions until the solution become slightly turbid. The turbid solution was left at room temperature. The precipitation was collected by filtration, washed with hexane to give 2.5 g of title compound (37 % Yield).1U NMR (400 MHz, CHLOROFORM-J) delta ppm 2.51 (s, 3 H) 4.10 (s, 3 H) 7.90 – 8.06 (m, 2 H) 8.10 (d, I H) 8.87 (s, I H)

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; LO-ALFREDSSON, Yvonne; PAULSEN, Kim; RAKOS, Laszlo; ROTTICCI, Didier; WALDMAN, Magnus; WO2010/132015; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, name: 3-Methyl-1H-1,2,4-triazole

A mixture of 20 (1.1 g, 3.5 mmol) and 3-methyl-1H-1,2,4-triazole (1.4 g, 17.5 mmol) was stirredat 170 C for 2 h. After cooled down to room temperature, the reaction mixture was diluted with H2O(30 mL) and extracted with DCM (30 mL ¡Á 2). The combined organic phases were washed with brine(30 mL), dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. Theresidue was purified by column chromatography (silica gel, 0-100% EtOAc in petroleum ether) togive 21 (732 mg, 58.2% yield) as a yellow solid. LC-MS (ESI): m/z [M + 1]+ = 360.35

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Methyl-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Article; Meuser, Megan E.; Rashad, Adel A.; Ozorowski, Gabriel; Dick, Alexej; Ward, Andrew B.; Cocklin, Simon; Molecules; vol. 24; 8; (2019);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Prepared according to Mastalerz et al. J. Med. Chem. 1988, 31, 1190. To a solution of compounds A/B, step 1 (1.60 g, 3.44 mmol) in ACN:water (2:1, 45 mL) was added K2S2O8 (1.86 g, 6.88 mmol) followed by K2HPO4 (1.50 g, 8.60 mmol). The resulting mixture was heated to 90 C. for 4 h, whereupon it was cooled to rt then diluted with EtOAc and the layers separated. The aqueous layer was extracted with EtOAc (3 x) and the combined organic layers were dried over Na2SO4 and concentrated in vacuo. The crude residue was purified via silica gel chromatography (MeOH-DCM, 10%), to afford the title compounds (mixture, 670 mg, 62%) as a white solid. The mixture was further purified via chiral HPLC (Chiralcel-OJ, 2¡Á25 cm, EtOH-Hexanes, 18%), affording compound A (250 mg) and compound B (240 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; NOVARTIS AG; AULAKH, Virender Singh; CASAREZ, Anthony; LIN, Xiaodong; LINDVALL, Mika; MCENROE, Glenn; MOSER, Heinz Ernst; RECK, Folkert; TJANDRA, Meiliana; SIMMONS, Robert Lowell; YIFRU, Aregahegn; ZHU, Qingming; US2015/266867; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Step A Synthesis of 8-methoxy-2-methyl-4-(5-methyl-l//-l,2,4-triazol-l-yl)quinoline and 8- methoxy-2-methyl-4-(3 -methyl- H- 1 ,2,4-triazol- 1 -yl)quinoline4-chloro-8-methoxy-2- methylquinoline (100 mg, 0.481 mmol) was reacted with 3-methyl- IH-l, 2,¡¤ 4-triazole (46.0, 0.554 mmol) according to the synthesis of 4-(4-fluoro- 1 /Y-pyrazol- 1 -yl)-8-mcthoxy-2-mcthylquinolinc to give a mixture of the title compounds. MS (m/z): 255.3 [M+H+] Step B Synthesis of 2-methyl-4-(3-methyl-l//-l,2,4-triazol-l-yl)quinolin-8-ol and 2-methyl- 4-(5-methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-ol (0284) A mixture of 8-mcthoxy-2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc and 8- mcthoxy-2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc (153 mg, 0.602 mmol) was demethylated according to the synthesis of 4-(4-fluoro-l//-pyrazol-l-yl)-2-methylquinolin-8-ol to give a mixture of the title compounds. MS (m/z): 241.1 [M+H+] Step C. Synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((2-methyl-4-(5-methyl-l//-l,2,4-triazol-l- yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (0286) A mixture of 2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol and 2-methyl-4-(5- mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol (48.3 mg, 0.201 mmol) was reacted with (5)-2-(l-(3- chloro-2-(chloromethyl)-5-fluorophenyl)ethyl)isoindoline-l,3-dione (70.7 mg, 0.201 mmol) according to the synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((4-(4-fluoro-l/7-pyrazol-l-yl)-2- methylquinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline-l,3-dione to give a mixture of the title compounds. MS (m/z): 556.4 [M+H+]

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PHARVARIS B.V.; GIBSON, Christoph; SAUPE, Joern; AMBROSI, Horst-Dieter; HAUSTEDT, Lars Ole; (99 pag.)WO2019/101906; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

The solution of compound 1 (30 g, 0.13 mol) in THF (1.5 L) was cooled to -78 C. Then a solution of vinyl magnesium in THF (508 mL, 1N, 0.51 mol) was added dropwise to the above solution maintained below -40 C. The mixture was stirred for 3 hrs at -78 C before being quenched with saturated aqueous NH4Cl solution. The layers were separated, the aqueous layer was extracted with EtOAc (3¡Á500 mL) and the combined organic layer was washed with brine and concentrated. The crude product was purified by silica gel column chromatography to obtain compound 2 (5 g, 17%). Compound 2 (4.0 g, 17.2 mmol) was dissolved in freshly prepared NaOMe (20 mL). CuI (3.2 g, 17.2 mmol) was added to the above solution. The mixture was stirred at 110 C under microwave for 3 hrs. After the mixture was completed, the mixture was added EtOAc and H2O, then the suspension was filtered, the filtrate was separated. The organic layer was concentrated to give crude product which was purified by column chromatography to give compound 3 (1.8 g, 45%). A mixture of compound 3 (0.7 g, 3.8 mmol) and 3-methyl-1,2,4-triazole (6.4 g, 76.8 mmol) was added copper powder (0.49 g, 7.68 mmol) and KOH (0.43 g, 7.68 mmol). The mixture was heated tomelt at 170-175 C under N2. After the starting material was consumed completely, the mixture was added EtOAc and H2O, then the suspension was filtered, the filtrate was separated. The organic layer was concentrated to give crude product which was purified by column chromatography to give compound 4 (0.23 g, 26%). A solution of compound 4 (0.23 g, 1 mmol) in THF (12 mL) was cooled to -10 C, EtMgBr (0.47 g, 3.5 mmol)was added dropwise at -10 C followed by the addition of pyridine(0.3 mL). The slurry was cooled to -45 C, and the ethyl 2-chloro-2-oxoacetate (0.55 g, 4 mmol) was added dropwise at -45 C. The slurry was allowed to -10 C and stirred at this temperature for 1h. After the reaction was completed, the mixture was quenched with IPA (2mL) and H2O (20 mL). The mixture was extracted with EtOAc, the organic layer was washed with brine and concentrated to give crude product which was purified by column chromatographyto give compound 5 (0.17 g, 52%). A solution of compound 5 (0.17 g, 0.52mmol) in MeOH (5 mL) was added NaOH (0.041 g, 1.03 mmol) and H2O (2mL). The mixture was stirred at 25 C for 6 hrs and then added 1N HCl to adjusted pH 6, the mixture was concentratedto give compound 6 (0.29 g) as crude product.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tuyishime, Marina; Lawrence, Rae; Cocklin, Simon; Bioorganic and Medicinal Chemistry Letters; vol. 26; 1; (2016); p. 228 – 234;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 3-methyl-1H-1,2,4-triazole (7.3 g, 88 mmol) in DMF (75 mL) was added K2CO3 (60.7 g, 439 mmol) and 2-bromopropionic acid tert-butyl ester (14.6 mL, 88 mmol). The reaction was stirred at room temperature overnight. The mixture was diluted with EtOAc (500 mL), washed with water (¡Á3) then brine. Dried over MgSO4 and concentrated. The residue was purified by column chromatography on silica gel, eluting with EtOAc/isohexane (20 to 100%) to give 13 g of crude product as a 3:1 mixture of regioisomers. The mixture was purified by Chiralcel OD with a gradient from 4% to 30% IPA/Heptane. Then the first two peaks were separated with Chiracel OD column isocratically eluting with 4% IPA/Heptane. The second peak was collected as the desired single stereoisomer (R or S) (2-(3-methyl-1H-1,2,4-triaol-1-yl)propanoic acid tert-butyl ester) (3.5 g, 19%). 1H-NMR (500 MHz, CDCl3) delta 8.05 (s, 1 H), 4.90 (q, J=7 Hz, 1 H), 2.35 (s, 3 H), 1.72 (d, J=7 Hz, 3 H), 1.40 (s, 9 H). ESI-MS calculated for C10H17N3O2: Exact Mass: 211.13; Found 156.05 (-tBu).

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Berger, Richard; Chang, Lehua; Edmondson, Scott D.; Goble, Stephen D.; Ha, Sookhee Nicole; Kar, Nam Fung; Kopka, Ihor E.; Li, Bing; Morriello, Gregori J.; Moyes, Chris R.; Shen, Dong-Ming; Wang, Liping; Zhu, Cheng; US2009/253705; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics