Category: 41253-21-8

Adding a certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8, Safety of Sodium 1,2,4-triazol-1-ide

EXAMPLE 1 A mixture of 2,2′-(5-methyl-1,3-phenylene)di(2-methylpropiononitrile), (2.26 g), N-bromosuccinimide (1.78 g), benzoyl peroxide (0.05 g) and carbon tetrachloride (50 ml) was heated under reflux for 2 h, cooled and filtered, and the filtrate was evaporated to dryness under reduced pressure. The residue was dissolved in dimethylformamide (20 ml), sodium triazole (1.8 g) was added, and the mixture was stirred at room temperature for 18 h. Water (100 ml) was added, and the mixture was extracted twice with ethyl acetate. The extracts were combined, dried and evaporated to dryness under reduced pressure, and the residue was purified by flash column chromatography, eluding with ethyl acetate, to give 2,2′-[5-(1H-1,2,4-triazol-1-ylmethyl)-1,3-phenylene]di(2-methylpropiononitrile), mp 81-82 after crystallisation from ethyl acetate/cyclohexane.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Sodium 1,2,4-triazol-1-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Imperial Chemical Industries plc; US4935437; (1990); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

2-(lH-l,2,4-Triazol-l-yl)benzonitrile. A suspension of 2-fluorobenzylnitrile (3.0 g, 25 mmol) and 1,2,4-triazole sodium salt (2.4 g, 27 mmol) were stirred in tetrahydrofuran (7 mL) and dimethylformamide (14 mL) at 95 0C for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) 6 ppm: 8.74 (IH, s), 8.16 (IH, s), 7.82 (IH, dd, J= 4.9,1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (IH, m). LCMS [M+H]+ calcd for C9H7N4: 171.06; found: 171.12.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Sodium 1,2,4-triazol-1-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/64316; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 41253-21-8 name is Sodium 1,2,4-triazol-1-ide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

At room temperature, 113g of acetonitrile was added to the four-necked flask.1,2,4-triazole sodium salt (18.20 g, 0.2 mol),2,4′-Dichloroacetophenone (37.80 g, 0.2 mol), heated to 80-85 C,The reaction was 1-2 h, the reaction was completed, the solvent was evaporated to dryness under reduced pressure, 50 g of water was added, and extracted with 150 g of dichloromethane, and washed with water.The solvent was dried to give a white solid with a qualitative content of 98%.The weight yield was 96%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Sodium 1,2,4-triazol-1-ide, and friends who are interested can also refer to it.

Reference:
Patent; Huai’an Guorui Chemical Co., Ltd.; Wu Yaojun; Zhang Pu; Zhao Wei; Jin Yucun; Wang Fengyun; Chen Mingguang; Mao Gengsheng; (11 pag.)CN109553583; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 41253-21-8 name is Sodium 1,2,4-triazol-1-ide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

4-Fluoro-2-(1H-1,2,4-triazol-1-yl)benzonitrile (33) and 4-(1H-1,2,4-triazol-1-yl)-2-fluorobenzonitrile. To a solution of 2,4-difluorobenzonitrile (10 g, 72 mmol) dissolved in THF (20 mL), and DMF (40 mL) was added 1,2,4-triazole sodium derivative (6.3 g, 70 mmol) and the mixture was stirred at 90 C. for 3 h, filtered and concentrated. The residue was adsorbed onto Silica gel and purified by flash chromatography eluting with 0%-10%-30% EtOAc/hexanes to give intermediate 33 as colorless needles (2.46 g, 18%) and intermediate 34 was obtained as a white solid (0.7455 g, 6%). Intermediate 33: 1H NMR (500 MHz, CDCl3) o: 8.89 (1H, s), 8.19 (1H, s), 7.85 (1H, dd, J=8.7, 5.6 Hz), 7.60 (1H, dd, J=8.8, 2.4 Hz), 7.28-7.24 (1H, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13. Intermediate 34: 1H NMR (500 MHz, CDCl3) delta: 8.66 (1H, s), 8.15 (1H, s), 7.79 (1H, dd, J=8.5, 6.7 Hz), 7.69 (1H, dd, J=9.5, 1.8 Hz), 7.65-7.63 (1H, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Sodium 1,2,4-triazol-1-ide, and friends who are interested can also refer to it.

Reference:
Patent; Naidu, B. Narasimhulu; US2005/256109; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 41253-21-8, These common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of 2-fluorobenzylnitrile (3.0 g, 25 mmol) and 1,2,4-triazole sodium salt (2.4 g, 27 mmol) were stirred in tetrahydrofuran (7 mL) and dimethylformamide (14 mL) at 95 C. for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta ppm: 8.74 (1H, s), 8.16 (1H, s), 7.82 (1H, dd, J=4.9,1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (1H, m). LCMS [M+H]+ calcd for C9H7N4: 171.06; found: 171.12.

Statistics shows that Sodium 1,2,4-triazol-1-ide is playing an increasingly important role. we look forward to future research findings about 41253-21-8.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 41253-21-8,Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 30 Preparation of bis(4-Fluorophenyl)methyl(1H,-1,2,4-triazol-1-ylmethyl)silane and its hydrochloride salt A mixture of 4.2 g (0.015 mol) of (chloromethyl)bis(4-fluorophenyl)methylsilane and 1.4 g (0.015 mol) of 1,2,4-triazole sodium salt in 8 ml of dimethylformamide was stirred at 80 for 2 hours. The resulting slurry was cooled, diluted with water, and washed with ether. The ether extracts were washed with several portion of water and once with brine, dried over magnesium sulfate, and evaporated to leave 4.0 g of a pale yellow oil. Impurities were removed by Kugelrohr distillation at 120-125 (0.05 mm), leaving behind 2.3 g (49%) of the title compound as a yellow oil: nD21 1.5538; ir (neat) 3065, 3030, 2960, 2925, 1590, 1500, 1270, 1235, 1165, 1110, 1010, 830, 790 cm-1; nmr (CDCl3): 0.7 (3H, s), 4.2 (2H, s), 7.1 (4H, t, J=9), 7.5 (4H, d of d, J=6 and 9), 7.8 (1H, s) and 7.9 (1H, s). A sample prepared similarly was crystallized from hexane at -20 C. to give colorless solid, m.p. 52-53. The hydrochloride salt of the title compound was prepared as follows. A solution of 5.0 g (0.016 mol) of [bis(4-fluorophenyl)]methyl(1H-1,2,4-triazol-1-ylmethyl)silane in 100 ml of toluene was stirred while HCl gas was passed over the solution surface until no further precipitate formed. The colorless solid was collected by filtration, washed with toluene and petroluem ether, and air-dried to give 5.1 g (91%) of the hydrochloride salt, m.p. 195-197. Recrystallization from 100 ml of hot ethanol gave 3.5 g of colorless crystals, m.p. 201-203. Acid salts of the other triazoles of this invention can be prepared similarly. By applying the procedures of Examples 24 and 26-30 to appropriate chloromethylsilanes, the compounds of Table VI can be prepared.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Sodium 1,2,4-triazol-1-ide, its application will become more common.

Reference:
Patent; E. I. Du Pont de Nemours and Company; US4510136; (1985); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 41253-21-8 as follows.

To a solution of 4-cyclohexyl-4-methansulfonyloxymethyl-piperidine-1-carboxylic acid tert-butyl ester (39 g, 103.8 mmol) in N,N-dimethylformamide (200 mL) is added sodium triazole (38 g, 415.2 mmol). The resulting solution is heated to 100 C. for 24 hours then cooled to room temperature. The solvent is removed under reduce pressure and the crude product purified over silica (80:20 EtOAc:hexane) to afford 28.7 g (79.7% yield) of the desired compound as a colorless solid. 1H NMR (CD3OD) delta 0.95-1.90 (m, 15H), 1.46 (s, 9H), 3.45-3.55 (m, 4H), 4.34 (s, 2H), 7.99 (s, 1H), 8.48 (s, 1H). MS (ESI) m/z 349, (M+H+), 371(M+Na+)

According to the analysis of related databases, 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; The Procter & Gamble Company; US2003/236230; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, A new synthetic method of this compound is introduced below., Formula: C2H2N3Na

To a 500 mL three-necked flask was added compound 6 (55.7 g, 0.12 mol) and dry DMSO (400 mL), sodium triazole (45.5 g, 0.5 mol), stirred at room temperature for 1 h, heated to 80-100 C for 24 h, The raw material is finished (<1.5%). The reaction solution was cooled to room temperature, saturated ice brine (600 mL) was added, stirred, extracted with EA (250 mL x 2)Water (250 mL)Concentrated by steam to give 45.9 g of compound 7 as a yellow oil in a yield of 92.8% and a purity of 98.6%. The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future. Reference:
Patent; Shandong Luoxin Pharmaceutical Industry Company Limited; Liu, Xinquan; Zheng, Susu; Liu, Wei; (12 pag.)CN106146480; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8, Quality Control of Sodium 1,2,4-triazol-1-ide

General procedure: 2-Chloro-N-(6-alkoxybenzo[d]thiazol-2-yl)acetamide (5 mmol) and sodium 1,2,4-triazole (6 mmol)were dissolved in N,N-dimethylformamide (10 mL) and stirred for 10 h at room temperature. Half of thesolvent was then evaporated, the solution was poured in 50 mL water, and extracted with ethyl acetate(30 mL 3). The ethyl acetate layer was dried over anhydrous MgSO4. After removing the solventunder reduced pressure, the crude product was obtained and recrystallized from dichloromethane toyield a white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Sodium 1,2,4-triazol-1-ide, and friends who are interested can also refer to it.

Reference:
Article; Liu, Da-Chuan; Zhang, Hong-Jian; Jin, Chun-Mei; Quan, Zhe-Shan; Molecules; vol. 21; 3; (2016);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, A common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of 18 g sodium triazolide in 170 g DMF was heated to 90C. At this temperature 47,3 g of 78,3 wt-% racemic (3SR,7RS)-7-(4-chloro-benzyl)-4,4-dimethyl-1 – oxa-spiro[2.4]heptane (racemic mixture of IXa/IXb), prepared according to example 10, were added, followed by stirring of the mixture for 6 h at 90C. Then 129 g of the DMF were distilled off at 50C/3mbar. To the resulting residue 87 g water and 320 g of MCH were added and the phases were separated at 65C. The aqueous phase was extracted with 100 g fresh MCH at 65C. The combined MCH solutions were washed three times with 80 g water. Thereafter the MCH solution was concentrated to 309 g at 80C/500-400 mbar. For crystallization the solution was cooled from 80C to 0C with a rate of 6K/h. After stirring overnight the product was isolated by filtration. The filter cake was washed twice with 50 g of ice-cold MCH and then dried in a vacuum dryer at 50C/8 mbar. Thus 36.4 g of cis-metconazole were obtained, having a purity of 97.1 %, determined by quantitative GC-analysis, corresponding to a yield of 74.5%. Melting point: 1 12C H-NMR (500 MHz, CDCI3): delta/ppm = 0.62 (s, 3H), 1 .04 (s, 3H), 1 .28-1 .48 (m, 2H), 1 .64-1 .82 (m, 2H), 2.25 -2.52, (m, 3H), 3.87-3.94 (s, broad OH), 4.19 (d, 1 H) 4.28 (d, 1 H), 7.10 (d, 2H), 7.20 (d, 2 H), 7,.98 (s, 1 H), 8.21 (s, 1 H) 3C-NMR (125 MHz, CDC ): delta /ppm = 21 .94 (q), 25.08 (q), 27.20 (t), 35.83 (t), 38.07 (t), 46.29 (s), 46.86 (d), 53.92 (t), 82.37 (s), 128.36 (d, 2C), 130.19 (d, 2C), 131.46 (s), 139.71 (s), 144.30 (d), 151.37 (d)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BASF AGRO B.V., ARNHEM (NL), ZUeRICH-BRANCH; ZIERKE, Thomas; KEMPER, Paul; WO2013/117629; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics