Category: 288-88-0

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., name: 1H-1,2,4-Triazole

Example 2 Synthesis of 2-((1H-1,2,4-triazol-1-yl)methyl)-2-(2,4-difluorophenyl)-1,3-dioxolane-4-thiol Sodium triazole was prepared in-situ by azeotropically distilling a mixture of 1,2,4-triazole (0.5 mol), sodium hydroxide solution (50%, 35.2 mL), toluene, (250 mL) and dimethylsulfoxide (250 mL) to a Karl Fisher water content less than 0.4% (by a Karl Fisher titration). The solution was cooled to 25 C., then a anhydrous toluene solution of 2-(bromomethyl)-2-(2,4-difluorophenyl)-4-(ethylthio)-1,3-dioxolane (Chemical Structure 8, 1.8 mol) was added. The temperature was increased to 75 C. and held at that temperature to reaction completion (monitored by TLC). Then the reaction mixture was cooled to 35 C. and quenched with dilute sodium hydroxide aqueous solution slowly to keep the temperature below 45 C. After the resulting mixture was cooled to 25 to 35 C., water and toluene were added. After the phases were separated, the aqueous phase was washed with toluene 3 to 5 times. The combined organic phases were concentrated under a maximum temperature of 70 C. The ethyl group of the thioester (1 mol) was removed by treated the resulting residue with sodium methoxide (approximately 8 mol) in dimtheylformamide (300 mL). The reaction mixture was stirred under nitrogen over night at 120 C. After cooling to room temperature, the reaction was quenched by adding methyl iodide (5 mol) under constantly stirring. Then the mixture was poured into water (350 mL) and extracted with tert-butyl methyl ether (100 mL*3). The organic phase was washed with saturated sodium sulphate solution and condensed. The residue was dissolved in warm toluene and washed with dilute hydrochloric acid aqueous solution, up to two times. After filtration of the precipitate and crystallization from isopropanol/Isopropyl ether (8/2, v/v), the D form of Chemical Structure A where X is -SH was obtained in ~65% yield (Chemical Structure 9).

The synthetic route of 288-88-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wu, Nian; Keller, Brian Charles; US2010/143455; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., SDS of cas: 288-88-0

EXAMPLE 1 This Example illustrates the preparation of 1-trityl-1,2,4-triazole. A solution of trityl chloride (417.7 g) in dichloromethane (1.21) was added slowly over two hours, whilst maintaining the temperature below 50 C. by external cooling, to a solution of 1,2,4-triazole (103.5 g) and triethylamine (151.5 g, 209 ml) in N,N-dimethylformamide (500 ml). The mixture was then stirred for a further one hour, poured into water (21) and extracted with dichloromethane (5*500 ml). The extracts were dried over magnesium sulphate, evaporated under reduced pressure and the crude product triturated with ether (200 ml total) to give the title compound (425 g, m.p. 213-214 C.). NMR (CDCl3): delta7.1-7.4 (15H,m), 8.03(1H,s), 8.08(1H,s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-88-0 as follows.

(1) Sodium hydride (60% dispersion in mineral oil, 13.8 g, 345 mmol) was washed with hexane and suspended in DMF (150 ml). At an ice bath temperature, 1,2,4-triazole (total; 20.7 g, 300 mmol) was added thereto in four divisions. After stirring for 30 minutes, to the mixture was added tritylchloride (total; 83.7 g, 300 mmol) in seven divisions and additionally added DMF (50 ml). After stirring for 1.5 hours at room temperature, to the reaction mixture was added water (600 ml). The precipitated crystal was collected by filteration, washed with water, dissolved in CHCl3 (800 ml) and dried. The solvent was evaporated. The obtained residue was chromatographed on silica gel (ethylacetate:CHCl3=1:2, v/v). The fraction of the objective was concentrated to give 1-trityl-1H-1,2,4-triazole (43.9 g). Yield: 47%.

According to the analysis of related databases, 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shionogi & Co., Ltd.; US6620841; (2003); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0,Some common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 474-( 1 H-1 ,2,4-triazol-1 -yl)-benzoic acidTo a solution of ethyl 4-fluoro-benzoate (1 .68 g) in N-methyl-pyrrolidinone (10 mL) is added 1 ,2,4-triazole (2.5 g) and K2CO3 (1 .5 g) and the mixture is heated at 190 C in a microwave oven for 30 min. After cooling to room temperature, the mixture is acidified with 2 M aqueous HCI and the precipitate is filtered off, washed with a small amount of water and methanol/dichloromethane and dried by suction to give the acid.

The synthetic route of 288-88-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; NEUROCRINE BIOSCIENCES, INC.; HECKEL, Armin; BLUM, Andreas; BREITFELDER, Steffen; HIMMELSBACH, Frank; LANGKOPF, Elke; NOSSE, Bernd; WELLENZOHN, Bernd; ASHWEEK, Neil, J.; HARRIOTT, Nicole; WO2012/123449; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-88-0, name is 1H-1,2,4-Triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-88-0, name: 1H-1,2,4-Triazole

0.69 g (10 mmol) of 1,2,4-triazole, 2.07 g (15 mmol) of potassium carbonate, 1.49 g(12mmol) of p-fluorobenzaldehyde, and dissolved in 50 mL of N,N-dimethylformamide. It was placedina 100 mL three-neckedflaskequipped with a thermometer and a stirring device.The reaction was carried out under constant temperature stirring at 100 C for 16 h, cooled to room temperature, extracted, suction filtered, separated by column chromatography, washed with warm water, recrystallized from anhydrous ethanol, and dried under vacuum at 50 C for 8 h to obtain 1,2,4-triazole benzaldehyde.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Qilu University of Technology; Duan Hongdong; Zhong Wenxia; (12 pag.)CN109867683; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-88-0, name is 1H-1,2,4-Triazole, This compound has unique chemical properties. The synthetic route is as follows.

Operating protocol A (82 C., 48 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 100% and 98% respectively. The residue obtained following treatment was purified by silica gel chromatography (eluent: hexane/dichloromethane, 100/0 to 50/50). 264 mg of a dark yellow solid was obtained in a yield of 91%. Pale yellow needles were obtained after re-crystallisation from chloroform. The compound obtained had the following formula: The characteristics were as follows: MPt: 46 C. (CHCl3) (Lit: 46-47 C. given by Micetich, R G; Spevak, P; Hall, T W; Bains, B K; Heterocycles 1985, 23, 1645-1649); 1H NMR/CDCl3: delta8.52 (wide s, 1H, H1), 8.04 (wide s, 1H, H2), 7.53-7.65 (m, 2H, H4,8), 7.26-7.51 (m, 3H, H5,6,7); 13C NMR/CDCl3: delta 152.55 (C1), 140.88 (C2), 139.96 (C3), 129.73 (C5 and C7), 128.15 (C6), 119.99 (C4 and C8); GC/MS: Rt=14.02 min, M/Z=145, purity=100%; Rf=0.21 (eluent: dichloromethane/ethyl acetate, 90/10). Example 1.18; Preparation of 1-phenyl-1H-[1,2,4]triazole; Operating protocol A (82 C., 24 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 79% and 99% respectively. ; Example 1.19; Preparation of 1-phenyl-1H-[1,2,4]triazole; Example 1.18 was repeated, operating at 50 C. (72 hours). The degree of transformation and selectivity for 1-phenyl-1H-[1,2,4-triazole] were 75% and 99% respectively.

The chemical industry reduces the impact on the environment during synthesis 1H-1,2,4-Triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Taillefer, Marc; Cristau, Henri-Jean; Cellier, Pascal-Philippe; US2005/234239; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., Formula: C2H3N3

Intermediate 82: step a 4-(1H-1,2,4-triazol-1-yl)benzaldehyde 4- Fluorobenzaldehyde (12.0 mL, 1 12 mmol) was added dropwise by syringe to a stirring, heterogeneous mixture of 1,2,4-triazole (11.6 g, 168 mmol) and potassium carbonate (24.7 g, 179 mmol) in dimethyl formamide (220 mL) at 23 C. The mixture was heated to 105 C. After 3.5 hours, the mixture was allowed to cool to 23 C. The cooled solution was transferred to a 2 L Erlenmeyer flask and diluted with water (500 mL) and ethyl acetate ( 200 mL). The biphasic mixture was stirred until the layers cleanly separated. The layers were separated. The organic layer was washed with half-saturated aqueous sodium chloride solution (3 100 mL). The washed solution was dried with sodium sulfate, and the dried solution was filtered. The filtrate was concentrated to provide an off-white solid. The solid was suspended in a mixture of heptanes and isopropyl acetate (5: 1, 600 mL). The mixture was filtered and the filter cake was washed with heptanes-isopropyl acetate (5: 1). The solids were collected and dried under vacuum to afford the title compound as a white solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-88-0 as follows. Formula: C2H3N3

General procedure: A mixture of CuI (0.10 g, 0.50 mmol), the required azole(10 mmol), K3PO4 (4.4 g, 20 mmol), the required halide (12 mmol)and N,N0-dimethylethylenediamine (0.11 mL, 1.0 mmol) in DMF(5 mL) was degased and heated under argon at 110 C for 72 h.After filtration over celite (washing using AcOEt) and removal ofthe solvents, the crude product is purified by chromatography oversilica gel (the eluent is given in the product description). 4.3.1 1-Phenyl-1H-1,2,4-triazole (2a) Compound 2a was prepared from 1,2,4-triazole (0.69 g) and iodobenzene (1.4 mL) using the general procedure 1, and was isolated (eluent: heptane/AcOEt 7:3) in 96% yield as a yellow powder: mp 48 C (lit. 28 46 C); 1H NMR (CDCl3, 300 MHz) 7.42 (m, 1H), 7.53 (m, 2H), 7.71 (m, 2H), 8.15 (s, 1H), 8.74 (s, 1H); 13C NMR (CDCl3, 75 MHz) 120.1 (2CH), 128.3 (CH), 129.9 (2CH), 137.1 (C), 140.9 (CH), 152.7 (CH).

According to the analysis of related databases, 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, Children learn through play, and they learn more than adults might expect. Science experiments are a great way to spark their curiosity, 288-88-0, Name is 1H-1,2,4-Triazole, SMILES is N1N=CN=C1, belongs to Triazoles compound. In a article, author is Tanritanir, Ahmet, introduce new discover of the category.

Efficacy and Tolerability of Rufinamide in Epileptic Children Younger Than 4 Years

Background: Rufinamide, a triazole derivative, is a new-generation antiseizure medication with a novel mechanism of action. We evaluated the efficacy and safety of rufinamide treatment in children with epilepsy younger than 4 years at our center. Methods: In this retrospective study, we included children younger than 4 years who had pharmacologically resistant epilepsy and were treated with rufinamide at Boston Children’s Hospital between June 2010 and June 2018. Safety and efficacy of rufinamide treatment were assessed immediately prior to initiation of rufinamide and at the last follow-up visit. Responders were defined as patients who had greater than 50% reduction in seizure frequency on follow-up as compared to baseline. Results: We reviewed records of 128 children and included 103 with complete information. Patients consisted of 60 boys (58%), with a median age of 20 months (interquartile range 13-28, range 2-36). Median treatment duration was 15 months, and median rufinamide dosage at the last follow-up was 42 mg/kg/d (interquartile range 34-56). At the last follow-up, seizure frequency decreased (450 vs 90, P<.001) and overall seizure reduction was 54%. Fifty-one patients (49.5%) were responders with 94% seizure reduction, including 20 (19.4%) who achieved seizure freedom. Treatment retention rate at 12 months was 63%. Thirty patients (29%) developed adverse events and 41 patients (39.8%) discontinued rufinamide because of adverse events (15; 14.5%) and lack of efficacy (26; 25%). Conclusion: Rufinamide is effective in reducing seizure frequency in pediatric epilepsy patients younger than 4 years, and overall well tolerated. Related Products of 288-88-0, One of the oldest and most widely used commercial enzyme inhibitors is aspirin, which selectively inhibits one of the enzymes involved in the synthesis of molecules that trigger inflammation. you can also check out more blogs about 288-88-0.

Let¡¯s face it, organic chemistry can seem difficult to learn. Especially from a beginner¡¯s point of view. Like 288-88-0, Name is 1H-1,2,4-Triazole. In a document, author is Dionizio, Thais Petizero, introducing its new discovery. SDS of cas: 288-88-0.

Copper(II) Schiff Base Complex with Electrocatalytic Activity Towards the Oxygen Reduction Reaction and Its Catalase Activity

The fuel cell is a continuously operating, low environmental impact, highly energy-efficient electrochemical device that has been cited as a clean energy source to replace fossil fuels. However, noble metals, such as platinum, are used as electrocatalysts to improve reaction kinetics, which raises the cost of this renewable energy source. This work aimed to evaluate a graphite paste electrode, modified with a copper(II) coordination compound containing N,O-donor groups, as an electrocatalyst in oxygen reduction reactions (ORR) and its catalase-like activity. Through electrochemical analyses, such as cyclic voltammetry and chronoamperometry, the modified electrode activity was investigated at different pH values and scan rates. Catalase activity was also investigated at different pH values in order to establish which would be the most active. The modified electrode proved to be a promising electrocatalyst in ORR in alkaline medium, and the copper(II) complex actively degraded hydrogen peroxide under alkaline conditions, which can help to increase the lifetime of the fuel cell device.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 288-88-0 help many people in the next few years. SDS of cas: 288-88-0.