Category: 288-88-0

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,4-Triazole

Intermediate 71; 1-Ethyl- IH-I, 2,4-triazole; A solution of DBU (220.2 g, 1.736 moles) in THF (200 ml) was added dropwise to a mechanically stirred suspension of 1, 2,4-triazole (100 g, 1.44 moles) and ethyl iodide (318 g, 2.026 moles) in dry THF (1 L) at 0 C, over a period of 3 hrs via addition funnel. The reaction mixture was allowed to warm to RT and stirred for overnight. The reaction mixture was filtered through celite and washed with THF (2x250ml). The combined filtrates were concentrated and the residue was distilled under reduced pressure to give the product as colorless liquid. (55gm) NMR (400 MHz, CDC13, delta): 1.51(t, 3H), 4.21 (q, 4H), 7.92 (s, IH), 8.05 (s, IH).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-88-0

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; PEER MOHAMED, Shahul, Hameed; WATERSON, David; WO2010/67125; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Operating protocol A (82 C., 48 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 100% and 98% respectively. The residue obtained following treatment was purified by silica gel chromatography (eluent: hexane/dichloromethane, 100/0 to 50/50). 264 mg of a dark yellow solid was obtained in a yield of 91%. Pale yellow needles were obtained after re-crystallisation from chloroform. The compound obtained had the following formula: The characteristics were as follows: MPt: 46 C. (CHCl3) (Lit: 46-47 C. given by Micetich, R G; Spevak, P; Hall, T W; Bains, B K; Heterocycles 1985, 23, 1645-1649); 1H NMR/CDCl3: delta8.52 (wide s, 1H, H1), 8.04 (wide s, 1H, H2), 7.53-7.65 (m, 2H, H4,8), 7.26-7.51 (m, 3H, H5,6,7); 13C NMR/CDCl3: delta 152.55 (C1), 140.88 (C2), 139.96 (C3), 129.73 (C5 and C7), 128.15 (C6), 119.99 (C4 and C8); GC/MS: Rt=14.02 min, M/Z=145, purity=100%; Rf=0.21 (eluent: dichloromethane/ethyl acetate, 90/10). Example 1.18; Preparation of 1-phenyl-1H-[1,2,4]triazole; Operating protocol A (82 C., 24 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 mul of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. The degree of transformation and selectivity were 79% and 99% respectively. ; Example 1.19; Preparation of 1-phenyl-1H-[1,2,4]triazole; Example 1.18 was repeated, operating at 50 C. (72 hours). The degree of transformation and selectivity for 1-phenyl-1H-[1,2,4-triazole] were 75% and 99% respectively.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; Taillefer, Marc; Cristau, Henri-Jean; Cellier, Pascal-Philippe; US2005/234239; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 91: Preparation of 4-(lH-l,2,4-triazol-l-yl)benzaldehyde (DI5) To a stirring solution of 4-fluorobenzaldehyde (10.0 g, 80.6 mmol) in DMF (150 mL) were added K2CO3 (13.3 g, 96.7 mmol) and 1,2,4- triazole (6.67 g, 96.7 mmol) and the resultant reaction mixture was stirred at 120 C for 6 h. After completion of reaction (by TLC), the reaction mixture was diluted with H20 and extracted with EtOAc (3 xlOO mL). The combined EtOAc layer was washed with H20 and brine, dried over Na2S04, and concentrated under reduced pressure to afford the title compound as a solid (9.0 g, 65%): mp 145-149 C: ]H NMR (400 MHz, CDC13) delta 10.08 (s, IH), 8.70 (s, IH), 8.16 (s, IH), 8.06 (d, J = 8.0 Hz, 2H), 7.92 (d, J = 8.0 Hz, 2H); ESIMS m/z 173.9 ([M+H]+).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-88-0, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(1) Sodium hydride (60% dispersion in mineral oil, 13.8 g, 345 mmol) was washed with hexane and suspended in DMF (150 ml). At an ice bath temperature, 1,2,4-triazole (total; 20.7 g, 300 mmol) was added thereto in four divisions. After stirring for 30 minutes, to the mixture was added tritylchloride (total; 83.7 g, 300 mmol) in seven divisions and additionally added DMF (50 ml). After stirring for 1.5 hours at room temperature, to the reaction mixture was added water (600 ml). The precipitated crystal was collected by filteration, washed with water, dissolved in CHCl3 (800 ml) and dried. The solvent was evaporated. The obtained residue was chromatographed on silica gel (ethylacetate:CHCl3=1:2, v/v). The fraction of the objective was concentrated to give 1-trityl-1H-1,2,4-triazole (43.9 g). Yield: 47%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; Shionogi & Co., Ltd.; US6620841; (2003); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Weigh 0.691 g (10 mmol) of 1,2,4-triazole,Para-fluorobenzaldehyde 1.240 g (10 mmol) and anhydrous potassium carbonate 2.760 g (20 mmol) were weighed out,Was dissolved in 25 mL of N, N-dimethylformamide,Add to a thermometer,In a 50 mL four-necked flask equipped with a stirrer,80 under the reaction after 10h stop heating,Filtered to remove potassium carbonate,Ethyl acetate extraction,After the solvent was removed by rotary evaporation,An off-white solid,Recrystallized three times with ethanol,Get pure,Drying at 50 C in vacuo for 6h gave 4- (1-1,2,4-triazolyl) benzaldehyde.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 288-88-0.

Reference:
Patent; Zibo Vocational Institute; Zhang Ye; Liu Hongming; (14 pag.)CN104119286; (2017); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Stage 79.3: 4-(1,2,4] Triazol-1-yl-benzaldehydeTo a solution of 6.44 ml (60 mmol) of p-fluorobenzaldehyde in 40 ml of pyridine, 4.14 g (60 mmol) of 1,2,4-triazole, 0.286 g (2 mmol) of copper(I)oxide and 9.12 g (66 mmol) of potasium carbonate are succesively added at r.t. After stirring for 18 h at 125 C., the reaction mixture is concentrated under reduced pressure. The residue is diluted with CHCl3 and filtered through celite. The filtrate is concetrated and purified by flash column chromatography on silica gel (eluent: n-Hexane:AcOEt=4:1?AcOEt only?AcOEt: MeOH=20:1) to give 4-[1,2,4] triazol-1-yl-benzaldehyde as major product and 4-[1,3,4] triazol-1-yl-benzaldehyde as minor product. 1H-NMR (400 MHz, CDCl3): 7.61 (d, 2H, J=8.56 Hz), 8.09 (d, 2H, J=8.56 Hz), 8.59 (s, 1H), 10.10 (s, 1H) (minor product); 7.91 (d, 2H, J=7.07 Hz), 8.05 (d, 2H, J=7.07 Hz), 8.16 (s, 1H), 8.69 (s, 1H), 10.07 (s, 1H) (major product).

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

Reference:
Patent; Novartis AG; US7138432; (2006); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-88-0, name is 1H-1,2,4-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 1 3,5-Dibromo-lH-l,2,4-triazole Solutions of bromine (6.1 mL, 119 mmol) in DCM (15 mL) and sodium hydroxide (6.78 g, 169 mmol) in water (20 mL) were simultaneously added dropwise to a stirred mixture of 1H-1,2,4- triazole (3.9 g, 56 mmol), water (50 mL) and DCM (15 mL) at 0C while keeping the reaction temperature below 20C. The mixture was stirred at ambient temperature over night. Hydrochloric acid (cone, 2.0 mL, 66 mmol) was added. The solid was isolated by filtration, washed with water and dried in vacuum to yield the title compound as a solid (8.3 g, 65%). MS (ESI ) m/z 224 [M-H]”.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 288-88-0.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; NORDVALL, Gunnar; MACSARI, Istvan; MALMBORG, Jonas; WO2014/195321; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-88-0, name is 1H-1,2,4-Triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-88-0, Quality Control of 1H-1,2,4-Triazole

6.91 g (100 mmol) of triazole was added to a 250 mL three-necked flask equipped with a magnet.14.86g (107.5mmol)Potassium carbonate and 80 mL of DMSO,Add 5 drops of Aliquat336 dropwise with stirring.After heating to 90 C, maintain 5 min;Further, 12.9 mL of p-fluorobenzaldehyde (120 mmol) was slowly added dropwise to the flask.The reaction was stopped after stirring at 80 C for 24 h.Hot filtered,Pour the filtrate into 500 mL of ice water.Stir,There is a lot of solid precipitation,Let stand layering,Filtering,Obtained white flocculent solid 13.03g,The yield is 75.2%,

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Fuyang Normal College; Liu Jie; Miao Hui; Qiao Rui; Liu Zhaodi; (18 pag.)CN109206405; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C2H3N3

To a solution of 1,2,4-triazole, 1 (27.6 g, 399.6 mmol) in dichloromethane (80 mL) was simultaneously added bromine in dichloromethane (50%v/v, 80 mL) and an aqueous solution of sodium hydroxide (50% w/v,96 mL). The rate of addition was such that the temperature of the reaction mass was maintained between 10-15C. After the complete addition, the temperature was raised to 25C and the stirring was continued for an additional 12 h. Into this was then added 6 N aq.HCl and stirring continued for 1 h.The solid thus precipitated was filtered, and dried under vacuum at 50C to afford 2 as an off-white solid(80 g, 90%). The product was used without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Roy, Bhairab Nath; Singh, Girij Pal; George, Shaji K.; Lathi, Piyush S.; Agrawal, Manoj K.; Trivedi, Anurag; Mishra, Madhan; Singh, Gajendra; Indian Journal of Chemistry – Section B Organic and Medicinal Chemistry; vol. 53; 5; (2014); p. 610 – 618;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, These common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 1 3,5-Dibromo-lH-l,2,4-triazole lH-l,2,4-Triazole (3.9 g, 56 mmol) was mixed in water (50 mL) and DCM (15 mL) at 0C. A solution of dibromine (6.1 mL, 119 mmol) in DCM (15 mL) and a solution of sodium hydroxide (6.78 g, 169 mmol) in water (20 mL) were added dropwise simultaneously while keeping the reaction temperature below 20C. The mixture was stirred at ambient temperature over night. Hydrochloric acid (cone, 2.0 mL, 66 mmol) was added. The solid was isolated by filtration, washed with water and dried under vacuum to yield the title compound as a solid (8.3 g, 65%). MS (ESI ) m/z 224 [M-H]”.

Statistics shows that 1H-1,2,4-Triazole is playing an increasingly important role. we look forward to future research findings about 288-88-0.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics