Category: 288-88-0

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,4-Triazole

Example 2 Synthesis of 2-((1H-1,2,4-triazol-1-yl)methyl)-2-(2,4-difluorophenyl)-1,3-dioxolane-4-thiol Sodium triazole was prepared in-situ by azeotropically distilling a mixture of 1,2,4-triazole (0.5 mol), sodium hydroxide solution (50%, 35.2 mL), toluene, (250 mL) and dimethylsulfoxide (250 mL) to a Karl Fisher water content less than 0.4% (by a Karl Fisher titration). The solution was cooled to 25 C., then a anhydrous toluene solution of 2-(bromomethyl)-2-(2,4-difluorophenyl)-4-(ethylthio)-1,3-dioxolane (Chemical Structure 8, 1.8 mol) was added. The temperature was increased to 75 C. and held at that temperature to reaction completion (monitored by TLC). Then the reaction mixture was cooled to 35 C. and quenched with dilute sodium hydroxide aqueous solution slowly to keep the temperature below 45 C. After the resulting mixture was cooled to 25 to 35 C., water and toluene were added. After the phases were separated, the aqueous phase was washed with toluene 3 to 5 times. The combined organic phases were concentrated under a maximum temperature of 70 C. The ethyl group of the thioester (1 mol) was removed by treated the resulting residue with sodium methoxide (approximately 8 mol) in dimtheylformamide (300 mL). The reaction mixture was stirred under nitrogen over night at 120 C. After cooling to room temperature, the reaction was quenched by adding methyl iodide (5 mol) under constantly stirring. Then the mixture was poured into water (350 mL) and extracted with tert-butyl methyl ether (100 mL*3). The organic phase was washed with saturated sodium sulphate solution and condensed. The residue was dissolved in warm toluene and washed with dilute hydrochloric acid aqueous solution, up to two times. After filtration of the precipitate and crystallization from isopropanol/Isopropyl ether (8/2, v/v), the D form of Chemical Structure A where X is -SH was obtained in ~65% yield (Chemical Structure 9).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,4-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; Wu, Nian; Keller, Brian Charles; US2010/143455; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Weigh 0.691 g (10 mmol) of 1,2,4-triazole,Para-fluorobenzaldehyde 1.240 g (10 mmol) and anhydrous potassium carbonate 2.760 g (20 mmol) were weighed out,Was dissolved in 25 mL of N, N-dimethylformamide,Add to a thermometer,In a 50 mL four-necked flask equipped with a stirrer,80 under the reaction after 10h stop heating,Filtered to remove potassium carbonate,Ethyl acetate extraction,After the solvent was removed by rotary evaporation,An off-white solid,Recrystallized three times with ethanol,Get pure,Drying at 50 C in vacuo for 6h gave 4- (1-1,2,4-triazolyl) benzaldehyde.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; Qilu University of Technology; Duan Hongdong; Xu Ting; Bu Juan; (13 pag.)CN107056716; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,4-Triazole

EXAMPLE 1 This Example illustrates the preparation of 1-trityl-1,2,4-triazole. A solution of trityl chloride (417.7 g) in dichloromethane (1.21) was added slowly over two hours, whilst maintaining the temperature below 50 C. by external cooling, to a solution of 1,2,4-triazole (103.5 g) and triethylamine (151.5 g, 209 ml) in N,N-dimethylformamide (500 ml). The mixture was then stirred for a further one hour, poured into water (21) and extracted with dichloromethane (5*500 ml). The extracts were dried over magnesium sulphate, evaporated under reduced pressure and the crude product triturated with ether (200 ml total) to give the title compound (425 g, m.p. 213-214 C.). NMR (CDCl3): delta7.1-7.4 (15H,m), 8.03(1H,s), 8.08(1H,s).

If you are hungry for even more, make sure to check my other article about 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H3N3

Example 91Preparation of 4-(1H-1,2,4-triazol-1-yl)benzaldehyde (DI5); To a stiffing solution of 4-fluorobenzaldehyde (10.0 g, 80.6 mmol) in DMF (150 mL) were added K2CO3 (13.3 g, 96.7 mmol) and 1,2,4-triazole (6.67 g, 96.7 mmol) and the resultant reaction mixture was stirred at 120 C. for 6 h. After completion of reaction (by TLC), the reaction mixture was diluted with H2O and extracted with EtOAc (3×100 mL). The combined EtOAc layer was washed with H2O and brine, dried over Na2SO4, and concentrated under reduced pressure to afford the title compound as a solid (9.0 g, 65%): mp 145-149 C.: 1H NMR (400 MHz, CDCl3) delta 10.08 (s, 1H), 8.70 (s, 1H), 8.16 (s, 1H), 8.06 (d, J=8.0 Hz, 2H), 7.92 (d, J=8.0 Hz, 2H); ESIMS m/z 173.9 ([M+H]+).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 288-88-0.

Reference:
Patent; Hunter, James E.; Lo, William C.; Watson, Gerald B.; Patny, Akshay; Gustafson, Gary D.; Pernich, Dan; Brewster, William K.; Camper, Debra L.; Lorsbach, Beth; Loso, Michael R.; Sparks, Thomas C.; Joshi, Hemant; Mandaleswaran, Adiraj; Sanam, Ramadevi; Gundla, Rambabu; Iyer, Pravin S.; US2012/329649; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-88-0, name is 1H-1,2,4-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 1,2,4-triazole (4.06 g, 58.7 mmol), potassium carbonate (9.05 g, 65.5 mmol), 4-fluorobenzaldehyde (6.3 ml, 58.7 mmol), and copper(I) oxide (0.26 g, 1.82 mmol) in pyridine (30 ml) is heated under nitrogen atmosphere at reflux overnight. After pyridine is distilled, the residue is diluted with chloroform, filtered, and washed with chloroform. The combined filtrate is washed with water, dried over magnesium sulfate, and concentrated in vacuo. The crude material is purified by column chromatography on silica with hexane/ethyl acetate (1:2) to give 4-(1,2,4-triazol-1-yl)-benzaldehyde and with ethyl acetate/methanol (19:1) to give 4-(1,3,4-triazol-1-yl)-benzaldehyde.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazole.

Reference:
Patent; Novartis AG; US5977075; (1999); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Into a clean 1000ml four-necked flask 200g of 2- (4-chlorophenethyl) -2-t-butyl ethylene oxide,200g triazole,90 g PEG-7000, 38 g KOH and 0.6 g 18-crown-6,To the dropping funnel, 400 g of 2- (4-chlorophenethyl) -2-t-butyl-oxirane were added dropwise.Turn on stirringWhen heated to 108 C,Begin with the dropwise addition of 2- (4-chlorophenethyl) -2-t-butyl-oxirane,Control the reaction flask temperature does not exceed 112 ,Dropping 2h, after the addition was completed,The reaction flask temperature was controlled at 108 ~ 112 ,Insulation 5h;Then warmed to 125 ~ 128 ,Insulation 8h, sample testing,Raw material peak is less than 0.5%4-H isomer 0.3%To the reaction flask was added enough water and methylcyclohexane,Wherein the mass ratio of water and methylcyclohexane is 1: 3.5;After stratification, the water cooled crystallization of PEG,Suction filtered solid PEG recovery applied;The organic layer was cooled to crystallize tebuconazole, filtered with suction,Filter cake was washed to pH 7 to 8,The filter cake was dried to give 772 g of 1H-tebuconazole.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazole.

Reference:
Patent; Jiangsu Jianpai Agrochemical Co., Ltd.; Liu Zhiyong; Zhu Peng; Yao Xuelin; Li Ming; (9 pag.)CN107176929; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,4-Triazole

To a solution of 1,2,4-triazole, 1 (27.6 g, 399.6 mmol) in dichloromethane (80 mL) was simultaneously added bromine in dichloromethane (50%v/v, 80 mL) and an aqueous solution of sodium hydroxide (50% w/v,96 mL). The rate of addition was such that the temperature of the reaction mass was maintained between 10-15C. After the complete addition, the temperature was raised to 25C and the stirring was continued for an additional 12 h. Into this was then added 6 N aq.HCl and stirring continued for 1 h.The solid thus precipitated was filtered, and dried under vacuum at 50C to afford 2 as an off-white solid(80 g, 90%). The product was used without further purification.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

Reference:
Article; Roy, Bhairab Nath; Singh, Girij Pal; George, Shaji K.; Lathi, Piyush S.; Agrawal, Manoj K.; Trivedi, Anurag; Mishra, Madhan; Singh, Gajendra; Indian Journal of Chemistry – Section B Organic and Medicinal Chemistry; vol. 53; 5; (2014); p. 610 – 618;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1H-1,2,4-Triazole

To a solution (3 ML) of 1,2,4-triazole (0.259 g, 3.75 mmol) in N,N-dimethylformamide was added small portions of sodium hydride (60% dispersion in oil, 0.12 g, 3.0 mmol) at about 20 C., and the mixture was stirred for about 3 hr until hydrogen was not generated.To a solution of sodium salt of 1,2,4-triazole thus obtained was added dropwise a solution (5.5 ML) of the total amount of (2R,3R)-3-(2′,4′-difluorophenyl)-3,4-epoxy-2-methanesulfonyoxybutane obtained above in N,N-dimethylformamide at room temperature.The mixture was stirred at 75-80 C. for 1.5 hr.The reaction mixture was added dropwise to water (20 ML), and the mixture was extracted 3 times with ethyl acetate (20 ML).The extracted ethyl acetate layers were mixed, and the mixture was washed twice with saturated brine (10 ML) and dried over anhydrous magnesium sulfate.After filtration, the filtrate (ethyl acetate solution) was concentrated and the obtained concentrate was subjected to silica gel column chromatography (SiO2, 5 g) and eluted with n-heptane-ethyl acetate (10:1)ethyl acetate.The objective fraction was concentrated to give a pale-yellow oil (0.297 g).The obtained pale-yellow oil was crystallized from a mixed solvent of ethyl acetate (1 ML)-n-heptane (4 ML) to give the title compound (0.185 g, yield from (2R)-2′,4′-difluoro-2-hydroxypropiophenone: 44%).As a result of analysis by HPLC, the optical purity was 100% e.e.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; Sumika Fine Chemicals Co., Ltd.; US2003/236419; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

Example 9; The same procedure and work-up treatment as Example 9 were performed, except that 20% aqueous potassium hydroxide solution (8.4g, 0.03 mol) was used in place of 20% aqueous sodium hydroxide solution (6.0g, 0.03 mol), to give (2R, 3S)-2-(2,4-difluorophenyl)-3-methyl-2-[(1H-1,2,4-triazol-1-yl)methyl]oxirane (11.0g, yield 43.8%, optical purity (HPLC condition-1) 100% e.e., mp 89C).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-88-0

Reference:
Patent; Sumitomo Chemical Company, Limited; EP1818332; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H3N3

6.91 g (100 mmol) of triazole was added to a 250 mL three-necked flask equipped with a magnet.14.86g (107.5mmol)Potassium carbonate and 80 mL of DMSO,Add 5 drops of Aliquat336 dropwise with stirring.After heating to 90 C, maintain 5 min;Further, 12.9 mL of p-fluorobenzaldehyde (120 mmol) was slowly added dropwise to the flask.The reaction was stopped after stirring at 80 C for 24 h.Hot filtered,Pour the filtrate into 500 mL of ice water.Stir,There is a lot of solid precipitation,Let stand layering,Filtering,Obtained white flocculent solid 13.03g,The yield is 75.2%,

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-88-0

Reference:
Patent; Fuyang Normal College; Liu Jie; Miao Hui; Qiao Rui; Liu Zhaodi; (18 pag.)CN109206405; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics