Category: 288-88-0

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

General procedure: To a solution of Cu(OAc)2·H2O (0.01 mmol) in DMF (2 mL) were added aryl iodide (1.2 mmol), nitrogen-containing heterocycle (1.0 mmol), and Cs2CO3 (2 mmol) under nitrogen atmosphere. The mixture was stirred at 110 C for 24 h. After cooling to ambient temperature, the mixture was partitioned between water and ethyl acetate. The organic layer was separated, and the aqueous layer was extracted with ethyl acetate. The combined organic layers were washed with brine, dried over Na2SO4, and concentrated in vacuo. The residue was purified by flash chromatography on silica gel.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

Reference:
Article; Xu, Zhong-Lin; Li, Hong-Xi; Ren, Zhi-Gang; Du, Wei-Yuan; Xu, Wei-Chang; Lang, Jian-Ping; Tetrahedron; vol. 67; 29; (2011); p. 5282 – 5288;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H3N3

j0185j Triethylamine (5.49 g, 54.30 mmol) is added to a solution of 1,2,4-triazole (3.0 g, 43.44 mmol) in DMF (50 mL) at rt. After stirring for 5 minutes, trityl chloride (12.11 g, 43.44 mmol) is added as a solid and the mixture is stirred overnight. The solvent is distilled off under reduced pressure and the crude is partitioned between dichloromethane (50 mL) and water (50 mL). The organic layer is separated and the aqueous layer is extracted with dichloromethane (3 x 50 mL). The combined organic layers are washed with water (3 x 40 mL). The organic layer is dried over Na2SO4 and concentrated under reduced pressure to afford the product 1-trytil-1H- 1,2,4-triazole (12.6 g, 93 %). n-BuLi (4.5 mL, 11.24 mmol; 2.5 M solution in hexanes) is added to a solution of 1-trityl-1H-1,2,4-triazole (3.5 g, 11.24 mmol) in THF (120 mL) at -78C and the solution is stirred for 45 mm. Bromine (1.76 g, 11.02 mmol) is added dropwise over a period of 5 minutes and the solution is stirred for 2 h allowed to warm to -20 C and quenched by adding saturated NH4C1 solution (30 mL). The reaction mixture ias diluted with water (60 mL) and dichloromethane (40 mL). The organic layer is separated and the aqueous layer is extracted with CH2C12 (4 x 50 mL).The combined organic extract was dried over Na2SO4 and the solvent evaporated under reduced pressure to afford crude which is used as such for the next step (4.2 g, 95 %). 7.09-7.16 (m, 6H), 7.27-7.40 (m, 9H), 7.86 (s, 1H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; NEWLINK GENETICS CORPORATION; KUMAR, Sanjeev; WALDO, Jesse; JAIPURI, Firoz; MAUTINO, Mario; WO2014/159248; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

Example 3. Synthesis of 1 -Ethyl- 1 H- 1.2,4-triazole (26a).Scheme 6. Preparation of Intermediate 26a.16a 18a 26a[111] Step 1. l-Ethyl-lH-l,2,4-triazole d8a): To an ice-cold solution of 1,2,4- triazole (5 g, 72.4 mmol) in anhydrous TEtaF (50 mL) was added ethyl iodide (7 mL, 86.9 mmol). DBU (10.8 mL, 72.4 mmol) was added dropwise to the cloudy system over 10-20 min. The reaction was allowed to slowly warm to room temperature and was stirred overnight. The mixture was filtered through a Celite pad and the filtrate was concentrated under reduced pressure to give 10 g of crude material as a yellow liquid. The crude material was Kugelrohr-distilled (at approximately 300 mtorr, 35- 40 0C) to provide 4.9 g (70%) of 18a as clear liquid.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

Reference:
Patent; CONCERT PHARMACEUTICALS, INC.; HARBESON, Scott, L.; TUNG, Roger, D.; LIU, Julie, F.; WO2011/5520; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

General procedure: A mixture of 4-fluoro acetophenone/4-fluorobenzaldehyde (10 mmol) and imidazole/triazole (10 mmol) were dissolved in dry DMF (20 mL). K2CO3 (12 mmol) was added in small portion within a period of 15 min to the above stirred solution. Mixture was stirred for 10-12 h at 110 C. Heating discontinued, K2CO3 was filtered off, filtrate extracted with ethyl acetate (3 × 15 mL). Organic layer was washed with water (3 × 15 mL), dried over anhydrous sodium sulphate and concentrated to given an oil which was purified on silica gel column (60-120 mesh) taking methanol: chloroform (1:99) as an eluent.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Article; Marrapu, Vijay K.; Chaturvedi, Vinita; Singh, Shubhra; Singh, Shyam; Sinha, Sudhir; Bhandari, Kalpana; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4302 – 4310;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-88-0, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 1 STR56 4.15 g (0.103 mole) of sodium hydroxide and a spatula-tip of azo-bis-isobutyronitrile were added to a solution of 71.55 g (0.3 mole) of 2-tert.-butyl-2-(4-chloro-phenyl-ethyl)-oxirane in 10 ml of N-methylpyrrolidone. The mixture was heated to 120 C. and a solution of 20.7 g (0.3 mole) of 1,2,4-triazole was added dropwise in the course of 3 hours, with stirring. The mixture was then stirred at 120 C. for a further hour and then allowed to cool. Thereafter, it was worked up by a procedure in which the N-methyl-pyrrolidone was distilled off at a bath temperature of 100 C. under a pressure of 0.2 mbar and the residue which remained was washed with water and then dried and stirred with 150 ml of benzine. The solid product which deposited was filtered off and dried again. 78.9 g (85.8% of theory) of 1-(4-chloro-phenyl)-4,4-dimethyl-3-(1,2,4-triazol-1-yl-methyl)-pentan-3-ol were obtained in this manner. It was demonstrated by analysis by HPLC that the product is not contaminated by the corresponding 1,3,4-triazole derivative.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; Bayer Aktiengesellschaft; US4626594; (1986); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 1.17 [0636] Preparation of 1-phenyl-1H-1,2,41 triazole [0637] Operating protocol A (82 C., 48 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 ?l of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. [0638] The degree of transformation and selectivity were 100% and 98% respectively. [0639] The residue obtained following treatment was purified by silica gel chromatography (eluent: hexane/dichloromethane, 100/0 to 50/50). [0640] 264 mg of a dark yellow solid was obtained in a yield of 91%. [0641] Pale yellow needles were obtained after re-crystallisation from chloroform. [0642] The compound obtained had the following formula: [CHEMMOL-00056] [0643] The characteristics were as follows: [0644] MPt: 46 C. (CHCl3) (Lit: 46-47 C. given by Micetich, R G; Spevak, P; Hall, T W; Bains, B K; Heterocycles 1985, 23, 1645-1649); [0645] H NMR/CDCl3:? 8.52 (wide s, 1H, HI), 8.04 (wide s, 1H, H2), 7.53-7.65 (m, 2H, H4,8), 7.26-7.51 (m, 3H, H5,6,7); [0646] 13C NMR/CDCl3: ? 152.55 (C1), 140.88 (C2), 139.96 (C3), 129.73 (C5 and C7), 128.15 (C6), 119.99 (C4 and C8); [0647] GC/MS: Rt=14.02 min, M/Z=145, purity=100%; [0648] Rf=0.21 (eluent: dichloromethane/ethyl acetate, 90/10). Example 1.18 [0649] Preparation of 1-phenyl-1H-[1,2,4]triazole [0650] Operating protocol A (82 C., 24 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 ?l of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. [0651] The degree of transformation and selectivity were 79% and 99% respectively. [CHEMMOL-00057] Example 1.19 [0652] Preparation of 1-phenyl-1H-[1,2,4]triazole Example 1.18 was repeated, operating at 50 C. (72 hours). The degree of transformation and selectivity for 1-phenyl-1H-[1,2,4-triazole] were 75% and 99% respectively. [0653] [CHEMMOL-00058]

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; Cellier, Pascal Philippe; Cristau, Henri-Jean; Spindler, Jean-Francis; Taillefer, Marc; US2003/236413; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C2H3N3

(ii) Preparation of crude anastrozole of formula-I; Into a 10L, three-necked RB flask was charged l.4kg of above crude compound of formula-V and 7L of anhydrous DMF. The reaction mass was stirred for 30min and added 0.65kg of solid sodium triazole (prepared by reaction of molar quantities of 1,2,4- IH-triazole and sodium hydroxide in isopropanol at reflux temperature and isolated by filtering of the reaction mass at room temperature) in lots keeping the temperature below 25 C. The reaction mass was maintained under stirring at this temperature for 4hr. HPLC of the reaction mass indicated the absence of starting material. The reaction mass was transferred into a 50L flask containing 21L of water and stirred for 30min. Reaction mass was extracted with toluene (2 x 3L and 1 x 1L). Toluene layers were combined and . washed with water (2 x 2L). Toluene was distilled of from the filtrate under vaccum to get 1.2kg of crude anastrozole.; (ii) Preparation of crude anastrozole; Into a 1 L, three-necked RB flask was charged 60g of sodium triazole monohydrate (prepared by reaction of molar quantities of 1,2,4-IH-triazole and sodium hydroxide in isopropanol at reflux temperature and isolated by filtering of the reaction mass at room temperature) and 200ml of dry DMF under nitrogen atmosphere. The reaction mass was cooled to 20 C. A solution of the above bromo compound of formula-V (140g) in toluene (200ml) was added to the reaction mass over a period of 2hr. The reaction mass was maintained at this temperature until the completion of reaction. The reaction mass was transferred into 3L flask containing 1.5L of water and stirred for 30min. Reaction mass was extracted with toluene (2 x 300ml and 1 x 100ml). Toluene layers were combined and washed with water (2 x 200ml). Toluene layer was treated with activated carbon (5g) and filtered. Toluene was distilled of from the filtrate under vaccum to get 130g of crude anastrozole.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-88-0, and we look forward to future research findings.

Reference:
Patent; NATCO PHARMA LIMITED; PULLA REDDY, Muddasani; VENKAIAH CHOWDARY, Nannapaneni; WO2005/105762; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 288-88-0

(1) Sodium hydride (60% dispersion in mineral oil, 13.8 g, 345 mmol) was washed with hexane and suspended in DMF (150 ml). At an ice bath temperature, 1,2,4-triazole (total; 20.7 g, 300 mmol) was added thereto in four divisions. After stirring for 30 minutes, to the mixture was added tritylchloride (total; 83.7 g, 300 mmol) in seven divisions and additionally added DMF (50 ml). After stirring for 1.5 hours at room temperature, to the reaction mixture was added water (600 ml). The precipitated crystal was collected by filteration, washed with water, dissolved in CHCl3(800 ml) and dried. The solvent was evaporated. The obtained residue was chromatographed on silica gel (ethyl acetate: CHCl3= 1: 2, v/v). The fraction of the objective was concentrated to give 1-trityl-1H-1,2,4-triazole (43.9 g). Yield: 47%.

If you are hungry for even more, make sure to check my other article about 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SHIONOGI & CO., LTD.; EP1219607; (2002); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 1. 250 mmol of dimethyl carbonate was added to a mixture of 50 mmol of 1,2,4-triazole and 12.5 mmol of sodium carbonate, and the resulting suspension was stirred at 120 C under a nitrogen atmosphere and refluxed for 16 h. Volatilization in the residual liquid in the vacuumWashing the residue with chloroform, filtering solid impurities, and spinning the filtrate.4.74 g of 4-methyl-1,2,4-triazole was obtained as a colorless liquid.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-88-0, Happy reading!

Reference:
Patent; Nanjing Tech University; Guan Guofeng; Ding Jing; He Yuting; Li Xue; Yuan Dashui; Wan Hui; Wang Lei; (9 pag.)CN108250227; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Add 1,2,4-triazole (17.44 g, 252.5 mmol),Sodium hydroxide (10.4g, 259.9mmol),2.8 g of triethylbenzyl ammonium chloride and 10 g of N, N-dimethylformamide were put into a reaction flask,After preheating to 80 C,Started the dropwise addition of 2- (4-chlorophenethyl) -2-tert-butylethylene oxide (59.1 g, 247.5 mmol),Control temperature ?95 during dropping,After the addition,Incubate at 98 102 for 2 3h,After the incubation period, add a water layer, wash the organic layer with water to pH <8, and after the organic layer is desolved under negative pressure,74.5 g of finished tebuconazole is obtained,Content 97.8%,The yield was 95.6%. This is the end of this tutorial post, and I hope it has helped your research about 288-88-0! Reference:
Patent; Jiangsu Qi Zhou Green Chemical Co., Ltd.; Chen Jia; Jiang Yuhua; Zhou Wei; Cai Junyi; Ding Fei; (6 pag.)CN110563660; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics