Category: 288-88-0

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,4-Triazole

Intermediate 82: step a 4-(1H-1,2,4-triazol-1-yl)benzaldehyde 4- Fluorobenzaldehyde (12.0 mL, 1 12 mmol) was added dropwise by syringe to a stirring, heterogeneous mixture of 1,2,4-triazole (11.6 g, 168 mmol) and potassium carbonate (24.7 g, 179 mmol) in dimethyl formamide (220 mL) at 23 C. The mixture was heated to 105 C. After 3.5 hours, the mixture was allowed to cool to 23 C. The cooled solution was transferred to a 2 L Erlenmeyer flask and diluted with water (500 mL) and ethyl acetate ( 200 mL). The biphasic mixture was stirred until the layers cleanly separated. The layers were separated. The organic layer was washed with half-saturated aqueous sodium chloride solution (3 100 mL). The washed solution was dried with sodium sulfate, and the dried solution was filtered. The filtrate was concentrated to provide an off-white solid. The solid was suspended in a mixture of heptanes and isopropyl acetate (5: 1, 600 mL). The mixture was filtered and the filter cake was washed with heptanes-isopropyl acetate (5: 1). The solids were collected and dried under vacuum to afford the title compound as a white solid.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,4-Triazole

, adding 50 mmol of sodium methoxide into 50 mmol of 1, 2, 4-triazole (shown in the formula II)) and 50 mL of methanol solution, stirring for 60 minutes at 40 DEG c, and dropwise adding 60 mmol of bromobenzene, carrying out condensation reflux for 16 hours at the temperature of 90 DEG c, removing volatile matters in the reaction raffinate, washing the carbon tetrachloride, and filtering the solid impurities, and carrying out rotary evaporation to remove the washing solvent to obtain colorless liquid 1-phenyl -1,2,4-triazole 6.32g

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-88-0

Reference:
Patent; Nanjing Tech University; Guan Guofeng; He Yuting; Ding Jing; Li Xue; Wan Hui; (9 pag.)CN108484654; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

EXAMPLE 108 1-phenyltriazole 1 g (0.0145 mol) triazole 2, 0.21 g (0.00145 mol) copper(I)oxide, 0.29 g (0.00145 mol) phenantroline monohydrate and 6.01 g (0.044 mol) potassium carbonate are weighed into a Schlenk flask. After repeated evacuating and flushing with argon, 10 ml dry DMF is added. Evacuating and flushing with argon are repeated several times. Subsequently, 2.42 ml (4.43 g, 0.022 mol) of iodobenzene is added. The reaction mixture is stirred for 48 h at 100 C. under argon. After cooling 20 ml DCM is added and filtered. The solvent is removed in vacuum and the product is obtained after purification by column chromatography (KG 60, gradient petroleum ether/EtOAc 8:2 to EtOAc) as a yellowish-white solid.M 145.17 C8H7N3 Yield: 1.362 g (65%)1H-NMR DM-94 (300 MHz/DMSO): (ppm)=7.41 (t, 1H, 6-H); 7.58 (t, 2H, 5/5′-H); 7.87 (d, 2H, 4-H); 8.25 (s, 1H, 1-H); 9.31 (s, 1H, 2-H)13C-NMR DM-94 (75.475 MHz/DMSO): (ppm)=119.37 (5/5′-C); 127.78 (6-C); 129.77 (4/4′-C); 136.74 (3-C); 142.27 (2-C); 152.39 (1-C)

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

14a p-(1,2,4-Triazol-1-yl)benzaldehyde and p-(1,2,4-Triazol-4-yl)benzaldehyde 21 ml (200 mmol) of 4-fluorobenzaldehyde (Fluka, Buchs, Switzerland), 30.48 g (220 mmol) of potassium carbonate and 13.8 g (200 mmol) of 1,2,4-triazole (Fluka, Buchs, Switzerland) are suspended in 100 ml of pyridine, after which 1.2 g of copper(I) oxide are added. The reaction mixture is boiled at reflux for 16 h. After that, the solvent is removed and the residue is taken up twice in toluene, followed by evaporation, and dissolved in methylene chloride. The insoluble material is removed by filtration and the solution is concentrated. This yields a mixture of the two 1,2,4-triazol-1-yl- and 1,2,4-triazol-4-yl-substituted benzaldehyde, which can be separated, after digesting with hexane, by means of chromatography on silica gel (mobile solvent: hexane/ethyl acetate 1:1, ethyl acetate and methylene chloride/5% methanol). p-(1,2,4-Triazol-1-yl)benzaldehyde: HPLC20-100: tret=8.50. 1H NMR (DMSO-D6; 200 MHz): 10.04/s (1H); 9.47/s (1H); 8.31/s (1H); 8.12 and 8.09/in each case d, J=10 (2*2H). p-(1,2,4-Triazol-4-yl)benzaldehyde: HPLC20-100: tret=5.96. 1H NMR (DMSO-D6; 200 MHz): 10.05/s (1H); 9.27/s (1H); 8.31/s (1H); 8.09 and 7.98/in each case d, J=9 (2*2H).

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-88-0, Happy reading!

Reference:
Patent; Novatis AG; US6451973; (2002); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 8; In DMSO (26.4ml), (2R, 3R)-3-(2,4-difluorophenyl)-3,4-epoxy-2-butanol (20.0g, 0.1 mol) and 1,2,4-triazole (10.4g, 0.15 mol) were dissolved and heated to about 60C with stirring. 20% aqueous sodium hydroxide solution (6.0g, 0.03 mol) was dropped thereto over about 15 minutes and further stirred for 5 hours at the same temperature for the reaction. After the reaction, the mixture was cooled, diluted with water (40ml) and neutralized (pH 6-7) with 35% hydrochloric acid. Ethyl acetate (100ml) was added, stirred and subjected to phase separation. The water layer was extracted with ethyl acetate (100ml) three times. A part of the ethyl acetate was taken and concentrated, and then NMR was measured to confirm the sample is (2R, 3R)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)-2,3-butanediol. 1H-NMR (CDCl3, delta ppm) 0.98 (3H, d, J=6Hz), 2.62 (1H, d, J=9Hz), 4.31-4.34 (1H, m), 4.79, 4.80 (each 1H, d, J=14Hz), 4.82 (1H, s), 6.72-6.79 (2H, m), 7.38-7.45 (1H, m), 7.83, 7.85 (each 1H, s) The ethyl acetate layers were combined and then distilled off under a reduced pressure. Subsequently, toluene (50ml) and triethylamine (65.8g, 0.65 mol) were added thereto and cooled to about 5C and stirred. Methanesulfonyl chloride (17.2g, 0.15 mol) was dropped thereto over about one hour and stirred for 30 minutes at the same temperature for the reaction. After the reaction, water (50 ml) was poured into and stirred, and then water layer was separated and extracted with toluene (100ml) three times. The combined toluene layers were washed with water and the solvent was distilled off under a reduced pressure. The concentrated residue was subjected to recrystallization from a mixed solvent of toluene/heptane (20/80; v/v, 400ml) to give (2R, 3S)-2-(2,4-difluorophenyl)-3-methyl-2-[(1H-1,2,4-triazol-1-yl)methyl]oxirane. (11.6g, yield 46.2%, optical purity (HPLC condition-1) 100%e.e., mp 89C)

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; Sumitomo Chemical Company, Limited; EP1818332; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-88-0, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Weigh p-iodoaniline (300.0mg, 1.37mmol), 1H-1,2,4- Triazole (113.4mg, 1.64mmol), CuI (26.0mg, 0.14mmol), cesium carbonate (624.7mg, 1.92mmol), 8-hydroxyquinoline (39.7mg, 0.27mmol) was placed in a 50mL single-necked flask, and mixed The solvent DMF: H2O (10: 1) was reacted at 110 C for 24 hours. After confirming the completion of the reaction by TLC, water was added, EA was extracted, and anhydrous sodium sulfate was dried. After concentration, it was purified through a silica gel column using a mobile phase with petroleum ether and ethyl acetate (V / V = 1/1) to obtain 4- (1H- 1,2,4-triazol-1-yl) aniline 3r was used as the starting material for the next reaction.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; Wuhan University; Wu Shuwen; Zhou Haibing; Xu Zhichao; (24 pag.)CN110483425; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

A flask was charged with K2CO3 (12.1689 g, 88 mmol), 1H-1,2,4-triazole (2.0042 g, 29 mmol), Cu2O(430 mg, 3 mmol) and 1,10-phenanthroline (1.0452 g, 5.8 mmol) and then evacuated and back-filled with N2. Then, anhydrous DMF (20 ml) and iodobenzene (8.9764 g, 4.92 ml, 44 mmol) were added and the resulting mixture was heated to 120 C for 64 h and then diluted with CH2Cl2 (40 ml). The mixture was filtered through a pad of Celite and the residue washed with CH2Cl2 (20 ml). The resulting organic layer was washed with water (20 ml) and brine (20 ml), dried over MgSO4 and concentrated under reduced pressure. The crude mixture was purified by column chromatography (cyclohexane/ethyl acetate 8/0?2/0) to yield the product as a pale yellow solid (2.986 g, 71%).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Article; Paul, Susann; Schweizer, W. Bernd; Rugg, Graham; Senn, Hans Martin; Gilmour, Ryan; Tetrahedron; vol. 69; 27-28; (2013); p. 5647 – 5659;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-88-0, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of 4-fluorobenzaldehyde (8.85 mL, 0.1 mol), the corresponding phenol, thiophenol or amine (0.1 mol), and a catalytic quantity of potassium carbonate (K2CO3) was refluxed in DMF (20 mL) for 36 h. After completion of the reaction, the mixture was poured into ice-water (50 mL), and the precipitated product was filtered, washed with deionised water, dried, and recrystallized from EtOH.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Article; Can, Nafiz Oencue; Can, Nafiz nc; Osmaniye, Derya; Levent, Serkan; Sa Sa?lik, Beguem Nurpelin; Inci, Beril; Ilgin, Sinem; Oezkay, Yusuf; Kaplancikli, Zafer Asim; Molecules; vol. 22; 8; (2017);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 1 3,5-Dibromo-lH-l,2,4-triazole lH-l,2,4-Triazole (3.9 g, 56 mmol) was mixed in water (50 mL) and DCM (15 mL) at 0C. A solution of dibromine (6.1 mL, 119 mmol) in DCM (15 mL) and a solution of sodium hydroxide (6.78 g, 169 mmol) in water (20 mL) were added dropwise simultaneously while keeping the reaction temperature below 20C. The mixture was stirred at ambient temperature over night. Hydrochloric acid (cone, 2.0 mL, 66 mmol) was added. The solid was isolated by filtration, washed with water and dried under vacuum to yield the title compound as a solid (8.3 g, 65%). MS (ESI ) m/z 224 [M-H]”.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2H3N3

0.69 g (10 mmol) of 1,2,4-triazole and 2.07 g (15 mmol) of potassium carbonate were weighed.1.24 g (10 mmol) of p-fluorobenzaldehyde,It was dissolved in 20 mL of N,N-dimethylformamide, and added to a 100 mL three-necked flask equipped with a thermometer and a stirring apparatus.The reaction was carried out under constant temperature stirring at 100C for 16 h, cooled to room temperature, extracted, suction filtered, separated by column chromatography, washed with warm water, recrystallized from anhydrous ethanol, and dried under vacuum at 50C for 8h that is, 1,2,4-triazole benzaldehyde.

If you are hungry for even more, make sure to check my other article about 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Qilu University of Technology; Duan Hongdong; Zhong Wenxia; Wang Lizhen; (12 pag.)CN109761992; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics