Category: 288-36-8

The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life. 288-36-8

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol~2-yl)-5-methylbenzoic acid, followed by the undesired regioisomer isomer, I -(2H- 1 ,2,3-triazoI-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to O0C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-7 as a yellow solid.

The chemical industry reduces the impact on the environment during synthesis 288-36-8. I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BRESLIN, Michael, J.; COLEMAN, Paul, J.; COX, Christopher, D.; SCHREIER, John, D.; WHITMAN, David, B.; WO2010/48010; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 288-36-8

Step 1) Synthesis of 5-methyl-2- (2H-1, 2, 3-triazol-2-yl) benzoic acid To a solution of N, N-dimethylformamide (30 mL) were added sequentially 2H-1, 2, 3-triazole (3.45 g, 50 mmol) , 2-iodo-5-methyl benzoic acid (5.24 g, 20 mmol) , cesium carbonate (11.72 g, 36 mmol) , trans-N, N’-dimethyl-1, 2-cyclohexanediamine (0.51 g, 3.6 mmol) and cuprous iodide (0.38 g, 2 mmol) . The reaction was heated to 100 ? under N2. After reaction for 4 hours, the reaction mixture was cooled to rt, diluted with water (60 mL) and extracted with ethyl acetate (200 mL ¡Á 2) . The aqueous layer was acidified to pH 1 to 2 with concentrated hydrochloric acid, and then extracted with ethyl acetate (200 mL ¡Á 2) . The combined organic layers were dried over anhydrous sodium sulfate, and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography (DCM/methanol (v/v) =50/1) to give the title compound as a yellow solid (2.76 g, 68 %) .MS (ESI, neg. ion) m/z: 202.1 [M-H] -;1H NMR (CD3OD, 600 MHz) d (ppm) : 7.88 (s, 2H) , 7.66 (d, 1H) , 7.59 (d, J= 8.2 Hz, 1H) , 7.50-7.48 (dd, J = 8.1 Hz, 1.1 Hz, 1H) , 2.45 (s, 3H) ; and13C NMR (CD3OD, 151 MHz) d (ppm) : 169.8, 140.7, 137.5, 136.7, 133.5, 131.5, 129.3, 126.0, 21.0.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 288-36-8, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; JIN, Chuanfei; ZHANG, Ji; (90 pag.)WO2017/88759; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-36-8, name is 1H-1,2,3-Triazole, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of 1H-1, 2, 3-triazole (10 g, 145 mmol) in anhydrous THF (150 mL) was added powder K2CO3(40.0g, 290 mmol) , then iodomethane (32.29 g, 227 mmol) was added dropwise at 30 . After the addition was complete, the mixture was stirred at 30 for 16 h. The reaction mixture was filtered and the filtrate was concentrated to afford the product as an oil.1H-NMR: (DMSO-d6400MHz) delta 8.06 (s, 1H) , 7.71 (s, 1H) , 4.05 (s, 3H)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; ARASAPPAN, Ashok; BUNGARD, Christopher James; FRIE, Jessica L.; HAN, Yongxin; HOYT, Scott B.; MANLEY, Peter J.; MEISSNER, Robert S.; PERKINS, James; SEBHAT, Iyassu K.; WILKENING, Robert R.; (140 pag.)WO2016/29454; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol) , 1H-1, 2, 3-triazole (0.600 g, 8.69 mmol) , potassium carbonate (2.00 g, 14.5 mmol) , and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was purged subsurface with nitrogen and heated at 75 for 96 h. The reaction was diluted with water, washed with ether, and acidified with conc. HCl. The acidic aqueous solution was extracted 3x with EtOAc and the combined organic fractions were washed with brine, dried over MgSO4, filtered, and concentrated in vacuo. The crude material was purified by silica gel column chromatography [0-70 (1acetic acid in EtOAc) in hexanes] , providing the title compound as a solid. LRMS m/z (M+H) 196.2 found, 196.1 required.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott D.; LIVERTON, Nigel; LUO, Yunfu; (59 pag.)WO2016/101118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8

1,2,3-Triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol),Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol),Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were sequentially added into a 100 mL single-necked round bottom flask, and the mixture was gradually heated to 100 C. under a nitrogen atmosphere for reaction for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were combined and dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated to dryness under reduced pressure and subjected to column chromatography Purification (dichloromethane / methanol (v / v) = 50/1) afforded the title compound (yellow solid, 2.76 g, 68%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The iodide 19 (6.04 kg, 23.0 mol), THF (45 E) and DMF (9.0 E) were charged to a vessel. Copper iodide (218 g, 1.15 mol) and potassium carbonate (7.94 kg, 57.4 mol) were added and the mixture heated to an internal temperature of40 C. 1,2,3-Triazole (3.16 kg, 46.0 mol) was added as asolution in THF (6.0 E) over half an hour (no exotherm) andheating continued to 65 C. (again no exotherm observed) and the reaction monitored by HPEC. Once complete N,Ndimethylethylenediamine (244 mE, 2.30 mol) was addedand mixture cooled to RT. Aqueous 3.6 M HC1 (36 E) wasadded (exotherm) and the mixture extracted twice with ethylacetate (2×30 E). The combined organics were washed with EiC1 solution (2×20 E). The acid solution assayed for 3.79 kg of 5 (81%) and 4.64 kg of 5 and 20 combined (99%). A solution of acids 5 and 20 (approx. 4.64 kg, 22.9 mol) in THF and EtOAc (approx. 110 E) was concentrated to lowvolume. THF (90 E) was added and the solvent composition checked by ?H NMR to ensure most ethyl acetate had been removed. Sodium tert-butoxide (2.42 kg, 25.2 mol) was added slowly as a solid over 1-2 h (slight exotherm), allowing the sodium salt to form and stirred overnight at RT. The liquors showed a 45:55 ratio of product:starting material and the solid was collected by filtration, washed with THF (2×20 E) and dried in a vacuum oven (T=40 C.) for 15 h to afford 4.22 kg of crude sodium salt. The crude sodium salt (4.22 kg, 14.9 mol) was charged to a 50 E vessel and 3.6 M HC1 (21.2 E) was added with cooling. The slurry was thenstirred at room temperature for 16 h and the off-white solidisolated by filtration. The cake was washed with water (11E) and iPAc/Heptane (2×5 E), then dried in a vacuum oven(T=35 C.) for 15 h to give 3.10 kg of crude acid 5 (97.9ECAP, 92 wt %, corrected weight 2.85 kg, 61% yield from19). The acid 5 (2.85 kg corrected, 14.0 mol) was chargedto a 50 E vessel and EtOAc (28 E) and dilute 0.22 M HC1 (14 E) were added and the mixture stirred until two clear phases resulted. The aqueous layer was removed and the organic layer filtered to remove any particulate matter. Theethyl acetate was reduced to about 8 E and then heptane (15.6 E) was added over 1 h and the liquors sampled to check for appropriate losses. The solid was isolated by filtration, washed with heptane:ethyl acetate (3:1, 4 E) and dried on the filter under nitrogen to give 2.81 kg of acid 5.m.p. 167.5 C. ?H NMR (400 MHz, d5-DMSO): oe 12.09 (brs, 1H), 8.04 (s, 1H), 7.62 (d, 1H, J=8.4 Hz), 7.58 (d, 1H, J=1.2 Hz), 7.49 (dd, 1H, J=8.4, 1.2 Hz), 2.41 (s, 3H). ?3C NMR (100.6 MHz, d5-DMSO): oe 168.0, 139.2, 136.4, 135.8, 132.5, 130.3, 128.7, 124.8, 20.9. HRMS (ESI): mlz [M+H] calcd for C,0H9N302: 204.0773; found: 204.0781.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; Fleitz, Fred; Mangion, Ian; Yin, Jingjun; (11 pag.)US9441254; (2016); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a so?ution of 2-choro-5-nitro-3-(trifluoromethy)pyridine (1 .0 g, 4.41 mmo) and K2CQ3 (1.22 g, 883 mmo) in THF (5 m) was added 2H-l ,2,3-triazoe (0.31 m, 5.30 mmo). The reaction mixture was stirred for lh at RT. Water was added and the mixture was extracted with AcOEt. The organic ayer was washed with brine, dried over Na2SO4, fHtered and concentrated under vacuum. The residue was purified by flash co?umn chromatography on sHica ge (cycohexane/AcOEt: 100/0 to 50/50) to afford 5-nitro-2- (2H-1 ,2,3-triazo-2-y 3-(trifluoromethy)pyridine. Miz = 260 [M+H]+, Rt = 0.88 mm (UPLC Method 81), 1H NMR (400 MHz, DMSO-d6) O ppm: 9.69 (d, IH), 9.17 (d, IH), 8,37 (s, 2H).

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; PISSOT SOLDERMANN, Carole; QUANCARD, Jean; SCHLAPBACH, Achim; SIMIC, Oliver; TINTELNOT-BLOMLEY, Marina; ZOLLER, Thomas; (161 pag.)WO2015/181747; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8.

To a 20 ml microwave vial containing 2-bromo-4,5-dimethoxybenzoic acid (3 g, 1 1 .5 mmol), copper iodide (0.04 g, 0.5 mol%), cesium carbonate (7.5 g, 23 mmol), triazole (1 .33 mL, 23 mmol) and finally (R,R)-(-)-N,N’-dimethyl-1 ,2- cyclohexanediamine ligand (0.36 mL, 2.3 mmol) was added DMF (12 mL). The resulting clumpy yellow slurry was stirred until evenly dispersed then heated to 120C for 10-20 min using a microwave. At this point the reaction mixture appeared as a blue slurry which was then diluted with 20 mL ether and 20 mL H2O. The resulting solution was thoroughly stirred and transferred to a seperatory funnel then the RBF was subsequently rinsed with 20 mL ether and H2O each. The aqueous layer was separated from the organic layer and acidified to pH 1 with 6 mL cone. HCI. The now brown/ lime green aqueous layer was extracted twice with EtOAc. The bright yellow organic layers were combined and dried with Na2SO4 and then cone, into a yellow powder under reduced pressure which was purified by FCC (0-5% MeOH in DCM w/ 0.5% AcOH) to afford 2,3-dimethoxy-6-[1 ,2,3]triazol-2-yl-benzoic acid (60%) and 2,3- dimethoxy-6-[1 ,2,3]triazol-1 -yl-benzoic acid (20%). Data for 2,3-dimethoxy-6- [1 ,2,3]triazol-2-yl-benzoic acid, MS (ESI): mass calculated for CnHnN3O4, 249.23; m/z found 250.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 7.87 (s, 2H), 7.47 (s, 1 H), 7.18 (s, 1 H), 3.94 (s, 3H), 3.91 (s, 3H).; Intermediate 80: 2,3-Dimethoxy-6-[1 , 2, 3]triazol-1 -yl-benzoic acid.The title compound was isolated from the procedure used to prepareIntermediate 79 with a 20% yield. MS (ESI): mass calculated for Cn Hn N3O , 249.23; m/z found 250.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 8.17 (d, J = 1 .0 Hz, 1 H), 7.82 (d, J = 1 .0 Hz, 1 H), 7.62 (s, 1 H), 7.09 (s, 1 H), 3.95 (s, 3H), 3.91 (s, 3H).

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50200; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol), 1H-1 ,2,3- triazole (0.600 g, 8.69 mmol), potassium carbonate (2.00 g, 14.5 mmol), and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was purged subsurface with nitrogen and heated to 75 C for 4 nights. The reaction was diluted with water, washed with ether, and acidified with cone. HC1. The acidic aqueous solution was extracted 3x with ethyl acetate and the combined organic fractions were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography [0-70% (1% acetic acid in ethyl acetate) in hexanes], providing the title compound as an off-white solid. LRMS m/z (M+H) 196.2 found, 196.1 required.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 288-36-8, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/95442; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., 288-36-8

EXAMPLE B2-(2H-l,2.3-triazol-2-v0benzoic acid (B- 1)A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF was treated with (1.5 g, 21.7 mmol) 1,2,3-triazole, 7.08 g (21.7 mmol) CsCO3, 1 14 mg (0.60 mmol) CuI and 310 mg (2.17 mmol) trans-N,N’-dimethylcyclohexane-l,2-diamine. The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting desired 2-(2H-l,2,3-triazol-2-yl)benzoyl acid, B-I . Data for IM : 1HNMR (500 MHz, DMSO-(I6) delta 13.05 (br s , IH), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. The undesired 2-(lH-l,2,3-triazol-2-yl)benzoic acid (B-2) eluted second.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK & CO., INC.; WO2008/143856; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics