Category: 288-36-8

288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

Intermediate 60: 2,3-Dimethoxy-6-[1 ,2,3]triazol-2-yl-benzoic acid.To a 20 ml microwave vial containing 2-bromo-4,5-dimethoxybenzoic acid (3 g, 1 1 .5 mmol), copper iodide (0.04 g, 0.5 mol%), cesium carbonate (7.5 g, 23 mmol), triazole (1 .33 mL, 23 mmol) and finally (R,R)-(-)-N,N’-dimethyl-1 ,2- cyclohexanediamine ligand (0.36 mL, 2.3 mmol) was added DMF (12 mL). The resulting clumpy yellow slurry was stirred until evenly dispersed then heated to 120 C for 10-20 min using a microwave. At this point the reaction mixture appeared as a blue slurry which was then diluted with 20 mL ether and 20 mL H2O. The resulting solution was thoroughly stirred and transferred to a seperatory funnel then the RBF was subsequently rinsed with 20 mL ether and H2O each. The aqueous layer was separated from the organic layer and acidified to pH 1 with 6 ml_ cone. HCI. The now brown/ lime green aqueous layer was extracted twice with EtOAc. The bright yellow organic layers were combined and dried with Na2SO4 and then cone, into a yellow powder under reduced pressure which was purified by FCC (0-5% MeOH in DCM w/ 0.5% AcOH) to afford 2,3-dimethoxy-6-[1 ,2,3]triazol-2-yl-benzoic acid (60%) and 2,3- dimethoxy-6-[1 ,2,3]triazol-1 -yl-benzoic acid (20%). Data for 2,3-dimethoxy-6- [1 ,2,3]triazol-2-yl-benzoic acid, MS (ESI): mass calculated for CnHnN3O4, 249.23; m/z found 250.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 7.87 (s, 2H), 7.47 (s, 1 H), 7.18 (s, 1 H), 3.94 (s, 3H), 3.91 (s, 3H).Intermediate 61 : 2,3-Dimethoxy-6-[1 ,2,3]triazol-1 -yl-benzoic acid.The title compound was isolated from the procedure used to prepareIntermediate 60 with a 20% yield. MS (ESI): mass calculated for Cn Hn N3O , 249.23; m/z found 250.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 8.17 (d, J = 1 .0 Hz, 1 H), 7.82 (d, J = 1 .0 Hz, 1 H), 7.62 (s, 1 H), 7.09 (s, 1 H), 3.95 (s, 3H), 3.91 (s, 3H).

According to the analysis of related databases, 1H-1,2,3-Triazole, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50202; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-(2H-1.2,3-triazol-2-yl>5-methylbenzoic acid (A-3)A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 1200C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO^ filtered and concentrated. The residue was purified by gradient elution on Sitheta2 (0 to 10% MeOH in water with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-3, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-3 : 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2008/8518; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, A common compound: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

2H-1,2,3-Triazole (760 mg, 11 mmol) was added to a suspension of 2,3-dichloro-5-nitro-pyridine (965 mg, 5 mmol) and anhydrous potassium carbonate (1.03 g, 7.5 mmol) in THF (50 mL), and the mixture was stirred overnight at room temperature. The mixture was diluted with EtOAc (100 mL), washed with water and brine, and the organic phase was dried over anhydrous sodium sulfate, filtered and concentrated. The residue was purified by silica chromatography (hexane: EtOAc = 5:1 to 1:1) to give the title compound (505 mg, 44%). ?H NMR (400 MHz, DMSO-d6): 9.39 (d, 1H), 9.15 (d, 1H), 8.34 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CORNELL UNIVERSITY; CHILDREN’S MEDICAL CENTER CORPORATION; DANA-FARBER CANCER INSTITUTE, INC; GRAY, Nathanael, S.; SCOTT, David, A.; HATCHER, John; DU, Guangyan; MELNICK, Ari, M.; GABAS, Lorena, Fontan; CASALENA, Gabriella; US, Ilkay; WU, Hao; QIAO, Qi; (178 pag.)WO2018/165385; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Method B: 2-Fluoro-6-[1 ,2,3]triazol-2-yl-benzoic acid. To a 2 L, 3- necked, round-bottomed flask equipped with an overhead mechanical stirrer, thermocouple probe, heating mantle, reflux condenser, and nitrogen inlet were added 2-fluoro-6-iodobenzoic acid (127.6 g, 480 mmol), copper iodide (4.57 g, 24 mmol), and Cs2C03 (312.6 g, 959 mmol). To these solids were added dioxane (640 mL), then water (2.6 mL, 144 mmol), then 1 H-1 ,2,3-triazole (55.6 mL, 959 mmol), and finally frans-1 ,2-dimethylcyclohexane-1 ,2-diamine (15.1 mL, 96 mmol). The mixture was then warmed to 60 C for 30 min, then to 83 C for 30 min, and then to 100 C for 3 h. After the 3 h at 100 C, the mixture was cooled and then 1 L of MTBE and 1 L of water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 1 .72 with -148 mL of concentrated hydrochloric acid. The aqueous was then extracted twice with EtOAc. The combined organic layers were dried over Na2S04, filtered, and concentrated to provide a dark oil. The oil was stirred overnight in EtOAc (450 mL) and the resulting precipitate was removed by filtration. The mother-liquors were concentrated to a brown solid (106.21 g, 75 wt% by quantitative HPLC, 79.7 g, 80%). 1H NMR (400 MHz, DMSO-d6): 8.22 – 8.13 (bs, 2H), 7.84-7.80 (m, 1 H), 7.74 – 7.65 (m, 1 H), 7.50 – 7.41 (m, 1 H).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LETAVIC, Michael; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHIREMAN, Brock, T.; SWANSON, Devin; WO2012/145581; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8. 288-36-8

4,5-dibromo-2H-l,2,3-triazole. Bromine (15 mL) was added dropwise to a stirred solution of 2H-l,2,3-triazole (15.0 g, 217 mmol) in water (200 mL) at 0C. Once addition was completed, the mixture was stirred for 12 hours at room temperature. The resultant mixture was filtered off and washed with water, dried over sodium sulfate and recrystallized from methanol to afford 4,5-dibromo-2H-l,2,3-triazole as a dark brown solid (29.8 g, 60.8%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1H-1,2,3-Triazole.

Reference:
Patent; CONSTELLATION PHARMACEUTICALS, INC.; ALBRECHT, Brian, K.; GEHLING, Victor, S.; HEWITT, Michael, C.; TAYLOR, Alexander, M.; HARMANGE, Jean-Christophe; WO2012/151512; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Synthesis of 5-methyl-2-(2H-l,2,3-triazol-2-yl)benzoyl chloride 14 15 16To a solution of 2-iodo-5-methylbenzoic acid (14, 4.00 g, 15.3 mmol) in DMF (10 mL) was added 1,2,3-triazole (2.10 g, 30.5 mmol), cesium carbonate (9.95 g, 30.5 mmol), copper(I) iodide (0.145 g, 0.76 mmol) and trans -N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with 1 NHC1 and extracted with EtOAc. The organic layer was dried over sodium sulfate, filtered and concentrated in vacuo. The resultant residue was purified by silica gel chromatography (MeOH:DCM with 0.1% AcOH = 0: 1 to 1 :9) to give the faster eluting 2- (2H-l ,2,3-triazol-2-yl)-5-methylbenzoic acid (15), followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid (16).

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; DI MARCO, Christina; WO2013/59163; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, A common compound: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Building block B2, L16, B23-B26: 2-(2-(bromomethyl)phenyl)-2H-1,2,3-triazole a) (2-(2H-1,2,3-triazol-2-yl)phenyl)methanol; To a mixture of (2-iodophenyl)methanol (1.50 g, 6.41 mmol), 1H-1,2,3-triazole (0.797 g, 11.54 mmol), trans-N,N’-dimethylcyclohexane-1,2-diamine (0.091 g, 0.641 mmol) and Cs2CO3 (3.76 g, 11.54 mmol) in DMF (15 mL), CuI (0.61 g, 3.20 mmol) was added and the reaction mixture was stirred for 20 min at 120 C. and 15 min at 160 C. in the microwave. The reaction mixture was cooled to rt and filtered to remove the solids. The filtrate was concentrated under reduced pressure. The residue was purified by flash-column chromatography over silicagel (eluent: gradient 10%-100% ethyl acetate/heptane) to yield the title compound (1.46 g, 64%). [1H NMR (400 MHz, DMSO-d6) delta ppm 8.10 (s, 2H), 7.74 (d, J=7.53 Hz, 1H), 7.61 (dd, J=8.03, 1.25 Hz, 1H), 7.52 (td, J=7.53, 1.25 Hz, 1H), 7.44 (m, 1H), 5.26 (t, J=5.40 Hz, 1H), 4.59 (d, J=5.02 Hz, 2H); LCMS RtA=0.68, [M+H]+=176.1].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BADIGER, Sangamesh; BEHNKE, Dirk; BETSCHART, Claudia; COTESTA, Simona; HINTERMANN, Samuel; OFNER, Silvio; PANDIT, Chetan; ROY, Bernard Lucien; US2012/101110; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, 288-36-8

A mixture of 2-chloro-5-nitropyridine-3-carbonitrile (9.0 g, 49 mmol), 2H-[1,2,3]Triazole (3.41 mL, 58.8 mmol) and potassium carbonate (20.32 g, 147 mmol) in acetonitrile (225 mL) was stirred at 30 C. for 2 h. Water and ethyl acetate were added and the organic phase was separated, dried with MgSO4, filtered and the filtrate concentrated to afford the crude product, which was mixed with dichloromethane (30 mL) and filtered to afford pure 5-nitro-2-[1,2,3]triazol-2-yl-nicotinonitrile (8.3 g, 78.4% yield) as an orange solid. 1H NMR (300 MHz, DMSO-d6) delta 8.46 (s, 2H), 9.45 (d, J=2.5 Hz, 1H), 9.61 (d, J=2.5 Hz, 1H). LC-MS m/z 217.0 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Janssen Pharmaceutica NV; Lu, Tianbao; Connolly, Peter J.; Cummings, Maxwell David; Barbay, Joseph Kent; Kreutter, Kevin D.; Wu, Tongfei; Diels, Gaston Stanislas Marcella; Thuring, Jan Willem; Philippar, Ulrike; Edwards, James Patrick; Shen, Fang; (202 pag.)US2019/381019; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows. 288-36-8

To a solution of 1H-1, 2, 3-triazole (10 g, 145 mmol) in anhydrous THF (150 mL) was added powder K2CO3(40.0g, 290 mmol) , then iodomethane (32.29 g, 227 mmol) was added dropwise at 30 . After the addition was complete, the mixture was stirred at 30 for 16 h. The reaction mixture was filtered and the filtrate was concentrated to afford the product as an oil.1H-NMR: (DMSO-d6400MHz) delta 8.06 (s, 1H) , 7.71 (s, 1H) , 4.05 (s, 3H)

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; ARASAPPAN, Ashok; BUNGARD, Christopher James; FRIE, Jessica L.; HAN, Yongxin; HOYT, Scott B.; MANLEY, Peter J.; MEISSNER, Robert S.; PERKINS, James; SEBHAT, Iyassu K.; WILKENING, Robert R.; (140 pag.)WO2016/29454; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-36-8 name is 1H-1,2,3-Triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 288-36-8

Compound 1a was prepared by adapting a procedure described. 8 A mixture of Cu2O (0.12 g, 0.80 mmol), 1,2,3-triazole (0.48 mL, 8.0 mmol), 1,10-phenanthroline (0.29 g, 1.6 mmol), iodobenzene (1.1 mL, 9.6 mmol) and tetramethylammonium fluoride (2.2 g, 24 mmol) was heated under argon at 120 C for 48 h. CH2Cl2 (10 mL) was added to the residue. After filtration over celite, the organic phase was washed with brine (2 * 5 mL) and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: CH2Cl2/heptane 1:1 to CH2Cl2/AcOEt 1:1) to afford the pure compound in 47% yield as an orange powder: mp 58 C; 1H NMR (CDCl3, 300 MHz) 7.42-7.49 (m, 1H), 7.51-7.58 (m, 2H), 7.74-7.78 (m, 2H), 7.88 (br s, 1H), 8.03 (d, 1H, J = 0.9 Hz). The 1H NMR data are in accordance with those previously described. 27 13C NMR (CDCl3, 75 MHz) 120.8 (2CH), 121.9 (CH), 129.0 (CH), 129.9 (2CH), 134.6 (CH), 137.2 (C).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-1,2,3-Triazole, and friends who are interested can also refer to it.

Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics