Category: 288-36-8

Application of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 1, 2, 3-triazole (3.45g, 50mmol), 2-iodo-5-methyl benzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘-dimethyl -1 , 2-cyclohexanediamine (0.51g, 3. 6mmol), cuprous iodide (0.38g, 2mmol) and N, N-dimethyl formamide (30 ml) are sequentially added to the 100 ml round bottom flask in a single port, the resulting reaction mixture under the protection of nitrogen is gradually heated up to 100 C, reaction 4 hours. Stop the reaction, cooling to room temperature to be reacted, water (150 ml) is diluted, and using ethyl acetate (200 ml ¡Á 2) extraction . Remove organic layer, the aqueous layer with concentrated hydrochloric acid (the mass fraction is 36.5%) acidified to pH to 1-2, then using ethyl acetate (200 ml ¡Á 2) extraction, and combined with the organic layer dried with anhydrous sodium sulfate. Filtering, the filtrate concentrated under reduced pressure, the resulting residue is purified by silica gel column chromatography (dichloromethane / methanol (v / v) = 50/1) to obtain the title compound as yellow solid (2.76g, 68%) .

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd.; Jinchuan, Fei; Gao, Heng; Zhang, Ji; Zhang, Yingjun; (84 pag.)CN105461699; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 1H-1,2,3-Triazole

Compound 8 was prepared by adapting a procedure described. 13 A degased solution of Pd2(dba)3 (20 mg, 90 mumol) and 2-di-tert-butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-1,1′-biphenyl (104 mg, 0.22 mmol) in toluene (6 mL) was heated at 120 C for 5 min and transferred to a degased mixture of K3PO4 (5.1 g, 24 mmol), 1,2,3-triazole (0.83 mL, 14 mmol) and 1-bromo-4-(trifluoromethoxy)benzene (1.8 mL, 12 mmol) in toluene (6 mL). The resulting mixture was heated under argon at 120 C for 24 h. CH2Cl2 (30 mL) was added, the organic phase was washed with NH4Cl-saturated water (10 mL) and brine (10 mL), and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: heptane/AcOEt 95:5) to afford the pure compound in 96% yield as a beige powder: mp <50 C; IR (ATR): 1606, 1511, 1411, 1386, 1251, 1207, 1193, 1152, 1100, 1084, 1056, 962, 949, 921, 852, 821, 731, 664 cm-1; 1H NMR (CDCl3, 300 MHz) 7.32-7.36 (m, 2H), 7.82 (s, 2H), 8.11-8.15 (m, 2H); 13C NMR (CDCl3, 75 MHz) 120.4 (2CH), 120.6 (q, C, J = 256 Hz), 122.0 (2CH), 136.0 (2CH), 138.4 (C), 148.3 (C); 19F NMR (CDCl3, 282 MHz) -58.0. The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings. Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C2H3N3

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1 ,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dirnethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 50% EtOAc in water with 0.1% TFA) to give the desired A-3. A portion of this acid (0.1 1 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2009/11775; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 1H-1,2,3-Triazole

To a mixture of2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesiumcarbonate (89.26 g, 274 mmol) and Cui (5.27 g, 27.4 mmol) in DMF (200 mL) were addedN,N’ -dimethylcyclohexane-1,2-diamine (3.7 mL,23.3 mmol) and 1H-1,2,3-triazole (18.92 g, 27430 mmol). The resulting mixture was stirred at 110 C overnight, cooled, concentrated in vacuo anddiluted with water (150 mL). The aqueous layer was extracted with EtOAc (300 mL x 3). The aqueous layer was acidified with 2N HCl and extracted with EtOAc (300 mL x 4). Thecombined organic layers were washed with brine (150 mL x 3), dried over Na2S04, filtered andthe filtrate concentrated in vacuo. The residue was purified by chromatography on silica gel(petroleum ether: EtOAc = 100: 1 ~ 5 : 1) to provide the title compound (18.13 g) as a yellow5 solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BESHORE, Douglas C.; KUDUK, Scott D.; LIVERTON, Nigel; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/18029; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2H-1,2,3-triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol)Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol)Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were successively added to a 100 mL single-necked round bottom flask,Under the protection of nitrogen gradually heated to 100 ,Reaction for 4 hours.Stop the reaction,cool down,Diluted with tap water and extracted with ethyl acetate (200 mL x 2).The aqueous layer was acidified with concentrated hydrochloric acid to pH = 1 to 2 and extracted with ethyl acetate (200 mL x 2)The combined organic layers were combined and dried over anhydrous sodium sulphate,filter,The filtrate was evaporated under reduced pressure and purified by column chromatography (dichloromethane / methanol (v / v) = 50 / 1) to afford the title compound (yellow solid, 2.76 g, 68%).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong HEC Pharmaceutical Co., Ltd.; Jin, Chuanfei; Gao, Jinheng; Zhang, Yingjun; (39 pag.)CN106243052; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 50 mL round-bottomed flask equipped with a magnetic stirbar was added 1-H-l, 2. 3-triazole (0.192 g. 2.78 mmol) and DMF (10 mL) and then cooled to O0C while stirring. Then. sodium hydride (60% dispersion in mineral oil) (0.133 g. 3.33 mmol) is added to the reaction mixture and was slowly allowed to warm to ambient temperature. Then, l-iodo-4 pentyne (0.647 g, 3.33 mmol) was added dropwise. The reaction mixture was then heated to 800C and allowed to stir for 2.5 hours. Water (20 mL) was then added to the reaction mixture and then extracted with ethyl acetate (2 x 20 mL). The organic phase was dried with sodium sulfate and concentrated de vacuo followed by a purification by column chromatography (ethyl acetate/hexane) to produce l-Pent-4-ynyl-lH-[1.2.3]triazole (0.349 g. 93%) as a colorless oil. iH NMR (300 MHz, CDCb) delta 7.67 (s, IH). delta 7.59 (s. IH). delta 4.53 (t. 2H). delta 2.20 (t, 2H). delta 2.17 (m. 2H), delta 2.04 (s, IH) ppm: ?C NMR (75 MHz. CDCb) delta 133.9. 123.9. 82.2, 70.4. 48.7, 28.9. 15.7 ppm: HRMS (ESI) calcd for C7H10N3 (M-) 136.0869, found 136.0866

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NORTH CAROLINA STATE UNIVERSITY; MELANDER, Christian; CAVANAGH, John; RITCHIE, David, F.; ROGERS, Steven, A.; HUIGENS, III, Robert, W.; WO2010/77603; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Computed Properties of C2H3N3

To 2-iodo-5-methylbenzoic acid (1.5 g, 5.72 mmol), copper(I) iodide (1.090 g, 5.72 mmol) and (lR,2R)-N,N’-dimethyl-l,2-cyclohexanediamine (0.814 g, 5.72 mmol) was added DMF (10 ml) under nitrogen and then 2H-l,2,3-triazole (0.474 g, 6.87 mmol). The reaction mixture was heated at 120 C at the microwave Personal Chemistry for 15 minutes. UPLC- MS monitor showed that the reaction was complete. After cooling at room temperature water was added and the aqueous washed with EtOAc. Then the aqueous acidified to pH =1 with aqueous 1 M HC1 and extracted with EtOAc. The phases were separated on a hydrophobic frit, the combined organic solvent was removed to give the crude product (2.4 g).The crude compound was purified by silica gel chromatography (SNAP KP-Sil lOOg cartridge) eluted with 5 CV of a mobile phase prepared with DCM (959.04 ml), acetic acid (0.96 ml) and MeOH (40 ml). The evaporation of proper fractions gave a yellow oil which was triturated with toluene (4 x 50 ml) and the title compound D44 was obtained as yellow solid (540 mg).UPLC (Basic GEN QC): rt = 0.35 minutes, peak observed: 204 (M+l) Ci0H9N3O2 requires: 203.1H NMR (400 MHz, DMSO-d6) delta ppm 2.44 (s, 3 H) 7.52 (dd, 1 H) 7.59 (s, 1 H) 7.64 (d, 1 H) 8.06 (s, 2 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GLAXO GROUP LIMITED; DI FABIO, Romano; WO2012/89606; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 1H-1,2,3-Triazole

Sodium methoxide, prepared from sodium (1.8 g, 79.8 mmol) and methanol (30 ml) was added to a cooled solution of 1 H-1 ,2,3-triazole (5 g, 72.5 mmol) and stirred at O0C for 30 minutes, lodomethane (5 ml, 79.8 mmol) was then added dropwise and the reaction warmed to room temperature and stirred for 24 hours. The reaction was concentrated in vacuo and the residue partitioned between dichloromethane and 1 M aqueous NaOH. The organic extract was dried over MgSO4 and concentrated in vacuo to afford the title compound as a yellow oil (2.5 g, 42% yield). 1HNMR (CDCI3): 4.11 (s, 3H), 7.53 (s, 1 H), 7.69 (s, 1 H)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PFIZER LIMITED; WO2008/135826; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1 ,2,3-trazole (10 g, 145 mmol) in 150 ml of THF were added potassium carbonate (40 g, 290 mmol) and MeI (13.58 ml, 217 mmol). The resulting reaction mixture was stirred at rt for 3hr. The reaction mixture was filtered and the filtrate was concentrated to afford the title compound (9.2 g, 78%). 1 H NMR (400 MHz, CDCI3) deltappm 7.71 (s, 1 H), 7.55 (s, 1 H), 4.14 (s, 3H).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/98104; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-1,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 C. for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with 1N HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-1,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, 2-(1H-1,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-2: 1HNMR (500 MHz, DMSO-d6) delta 12.98 (br s, 1H), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bergman, Jeffrey M.; Breslin, Michael J.; Coleman, Paul J.; Cox, Christopher D.; Mercer, Swati P.; Roecker, Anthony J.; US2008/132490; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics