Discovery of 1H-1,2,3-Triazole

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 288-36-8

Into a 3000-mL 3-necked round-bottom flask, was placed 2H-1,2,3-triazole (100 g, 1.45 mol, 1.00 equiv), water (1000 mL), Br2 (522 g, 3.27 mol, 2.25 equiv). The resulting solution was stirred overnight at 50 C. in an oil bath. The reaction was then quenched by the addition of 1000 mL of Na2SO3 (aq). The solid was collected by filtration and dried in an oven under reduced pressure. This resulted in 313 g (95%) of 4,5-dibromo-2H-1,2,3-triazole as a white solid.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Gilead Apollo, LLC; Ghosh, Shomir; Greenwood, Jeremy Robert; Harriman, Geraldine C.; Leit De Moradei, Silvana Marcel; (290 pag.)US2017/166584; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of 288-36-8

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 1H-1,2,3-Triazole

Intermediate D 2-(2H)-l ,2,3-Triazol-2-yl)thiophene-3-carboxylic acid Intermediate D A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmo’ 1 ,2,3-triazole (0.600 g, 8.69 mmol), potassium carbonate (2.00 g, 14.5 mmol), and copper(I) iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was sparged with nitrogen and heated to 75 C for 96 h. The cooled reaction mixture was diluted with water and washed with ether. The aqueous layer was acidified with cone. HCl. The acidic aqueous solution was extracted 3x with EtOAc and the combined organic fractions were washed with brine, dried over MgSC>4, filtered, and concentrated in vacuo. The crude material was purified by silica gel chromatography [0- 70% (1 % acetic acid in EtOAc) in hexanes] to provide the title compound. LRMS m/z (M+H) 196.2 found, 196.1 required.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8

Statistics shows that 1H-1,2,3-Triazole is playing an increasingly important role. we look forward to future research findings about 288-36-8.

Related Products of 288-36-8, These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Combine 1,2,3-triazole (3.45g, 50mmol), 2-iodo-5-methylbenzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘ -Dimethyl-1,2-cyclohexanediamine (0.51g, 3.6mmol), cuprous iodide (0.38g, 2mmol), N, N-dimethylformamide (30mL) were added to 100mL single-port round In a bottom flask, the temperature was gradually raised to 100 C under nitrogen protection for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL ¡Á 2).The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL ¡Á 2). The organic layers were combined, dried over anhydrous sodium sulfate, filtered, and the filtrate was evaporated to dryness under reduced pressure and purified by column chromatography ( Dichloromethane / methanol (v / v) = 50/1) gave the title compound (yellow solid, 2.76 g, 68%).

Statistics shows that 1H-1,2,3-Triazole is playing an increasingly important role. we look forward to future research findings about 288-36-8.

Reference:
Patent; GUANGDONG HEC PHARMACEUTICAL; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; JIN CHUANFEI; Jin Chuanfei; LAO JINHUA; Lao Jinhua; ZHANG YINGJUN; Zhang Yingjun; (35 pag.)CN108299437; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The origin of a common compound about 288-36-8

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows. COA of Formula: C2H3N3

To a solution of 2,3-dichloro-5-nitropyridine (1.0g, 5.18 mmol) and K2CO3 (1.43 g, 10.4 mmol) inTHF (5 ml) was added 2H-1,2,3-triazole (0.360 ml, 6.22 mmol). The reaction mixture was stirredovernight at RT. Since the reaction was uncomplete, additional 2H-1,2,3-triazole (0.300 ml, 5.18mmol) was added and reaction mixture was stirred for 2 days at RT. Water was added and themixture was extracted with AcOEt. The organic layer was washed with brine, dried over Na2SO4,filtered and concentrated under vacuum. The residue was taken-up in DCM, the solid wasfiltered off and the filtrate was evaporated. The crude product was purified by flashchromatography on silica gel (cyclohexane/AcOEt: 1/0 to 7/3) to afford 3-chloro-5-nitro-2-(2H-1,2,3-triazol-2-yl)pyridine.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Schlapbach, Achim; Revesz, Laszlo; Pissot Soldermann, Carole; Zoller, Thomas; Regnier, Catherine H.; Bornancin, Frederic; Radimerski, Thomas; Blank, Jutta; Schuffenhauer, Ansgar; Renatus, Martin; Erbel, Paulus; Melkko, Samu; Heng, Richard; Simic, Oliver; Endres, Ralf; Wartmann, Markus; Quancard, Jean; Bioorganic and Medicinal Chemistry Letters; vol. 28; 12; (2018); p. 2153 – 2158;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of 288-36-8

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Electric Literature of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1 ,2,3-trazole (10 g, 145 mmol) in 150 ml of THF were added potassium carbonate (40 g, 290 mmol) and MeI (13.58 ml, 217 mmol). The resulting reaction mixture was stirred at rt for 3hr. The reaction mixture was filtered and the filtrate was concentrated to afford the title compound (9.2 g, 78%). 1 H NMR (400 MHz, CDCI3) deltappm 7.71 (s, 1 H), 7.55 (s, 1 H), 4.14 (s, 3H).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/98104; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A new synthetic route of 288-36-8

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Safety of 1H-1,2,3-Triazole

To a solution of 5-fluoro-2- iodo-benzoic acid (3.86 g, 14.65 mmol), 2H-[1 ,2,3]triazole (2.5 g, 36.2 mmol), CS2CO3 (8.62 g, 24.5 mmol), trans-N, N’-dimethyl-cyclohexane-1 ,2-diamine (0.4 ml_), Cul (244 mg) and DMF (13 ml_) were added to a microwave ready vessel and heated to 100oC for 10 min. The mixture was cooled, diluted with water, and extracted with EtOAc. The aqueous layer was acidified and extracted with EtOAc. The organic layer was dried over Na2SO4 and concentrated.Chromatography (DCM to 10% MeOH/1 % HOAc/DCM) gave the product as a white powder (2.14 g, 71 %). 1H NMR (400 MHz, CD3OD): 7.91 (s, 2H), 7.76 (dd, J = 8.9, 4.8 Hz, 1 H), 7.59 (dd, J = 8.5, 2.9 Hz, 1 H), 7.49 – 7.42 (m, 1 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; CHAI, Wenying; LETAVIC, Michael, A.; LY, Kiev, S.; PIPPEL, Daniel, J.; RUDOLPH, Dale, A.; SAPPEY, Kathleen, C.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; SOYODE-JOHNSON, Akinola; STOCKING, Emily, M.; SWANSON, Devin, M.; WO2011/50198; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Introduction of a new synthetic route about 288-36-8

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

To 2H-I,2,3-triazoe (2.0 g, 29 rnmo) n DMF (145 mL) was added NaH (116 g, 29 mmo, 60/b n mnera o) at RT and the mixture was sfirred for lh. After coohng to 0C, 2-choro-I-fluoro-4-ntrobenzene (4.6 g, 26.1 rnmo) was added and the reacUon mixture was stirred at 0C for l.5h, then at RT for I.5h. The mixture was quenched with water and extracted with AcOEt, The organic phase was washed with water and brine, dried over Na2SO4, fitered and concentrated. The crude product was purified by sihca g& co?umn (heptane/AcOEt: 90/10 to 50/50) to afford 2-(2-choro-4-nitropheny)-2 H-. 1,2,3- triazoe. M/z = 225-227 [M+H]+, Rt = 095 mm (UPLC Method 83).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; NOVARTIS AG; PISSOT SOLDERMANN, Carole; QUANCARD, Jean; SCHLAPBACH, Achim; SIMIC, Oliver; TINTELNOT-BLOMLEY, Marina; ZOLLER, Thomas; (161 pag.)WO2015/181747; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Share a compound : 288-36-8

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Related Products of 288-36-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Intermediate A 2-(2H-l .2.3-Triazol-2-yl)benzoyl acid A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF (1.0 mL) was treated with 1,2,3-triazole (1.5 g, 21.7 mmol), copper(I) iodide (0.25 g, 1.2 mmol), Cs2C03 (7.08 g, 21.7 mmol), and fras-N,N’-dimethylcyclohexane-l ,2-diamine (0.31 g, 2.17 mmol). The mixture was heated at 120 C for 12h. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on Si02 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the title compound.1HNMR (500 MHz, DMSO-d6) delta 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. LRMS m/z (M+H) 190.2 found, 190.2.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The important role of 288-36-8

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Synthetic Route of 288-36-8, The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life.

To a mixture of the product from step 2 (7.9 g, 38 mmoi), Cs2CO3 (24.8 g,76 mmol) and Cui (2.88 g, 7,6 inmol) in DMF (200 mL) were added 21-{41,2,3ltriazole (5.24 g,76 rnrnoi) and N,Ndimethyi-cyciohexanei,2-diamine (0.9 g, 6.5 rnmoi) and the mixture was stirred at 110C overnight. The cooled mixture was adjusled to pHi2 with 1M sodium hydroxide and extracled with EtOAc (50 mL x 3). The aqueous layer was adjusted to pH 4 with I M FIC and extractedwith EtOAc (50 mLx4). The extracts was dried over Na2SO4, filtered, the filtrate concentrated in vacuo and the residue purified by chromatography on silica (Petroleum ether : EtOAc =10:1) to provide the title compound. LRMS m/z (M-f-1-1) 196.0 found, 196.0 required.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott D.; LIVERTON, Nigel; LUO, Yunfu; SKUDLAREK, Jason; (79 pag.)WO2016/95204; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discovery of 288-36-8

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 1H-1,2,3-Triazole

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-1,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 C. for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with 1N HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-1,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, 2-(1H-1,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-2: 1HNMR (500 MHz, DMSO-d6) delta 12.98 (br s, 1H), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bergman, Jeffrey M.; Breslin, Michael J.; Coleman, Paul J.; Cox, Christopher D.; Mercer, Swati P.; Roecker, Anthony J.; US2008/132490; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics