Category: 288-36-8

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Method B: 2-Fluoro-6-[1 ,2,3]triazol-2-yl-benzoic acid. To a 2 L, 3- necked, round-bottomed flask equipped with an overhead mechanical stirrer, thermocouple probe, heating mantle, reflux condenser, and nitrogen inlet were added 2-fluoro-6-iodobenzoic acid (127.6 g, 480 mmol), copper iodide (4.57 g, 24 mmol), and Cs2C03 (312.6 g, 959 mmol). To these solids were added dioxane (640 mL), then water (2.6 mL, 144 mmol), then 1 H-1 ,2,3-triazole (55.6 mL, 959 mmol), and finally frans-1 ,2-dimethylcyclohexane-1 ,2-diamine (15.1 mL, 96 mmol). The mixture was then warmed to 60 C for 30 min, then to 83 C for 30 min, and then to 100 C for 3 h. After the 3 h at 100 C, the mixture was cooled and then 1 L of MTBE and 1 L of water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 1 .72 with -148 mL of concentrated hydrochloric acid. The aqueous was then extracted twice with EtOAc. The combined organic layers were dried over Na2S04, filtered, and concentrated to provide a dark oil. The oil was stirred overnight in EtOAc (450 mL) and the resulting precipitate was removed by filtration. The mother-liquors were concentrated to a brown solid (106.21 g, 75 wt% by quantitative HPLC, 79.7 g, 80%). 1H NMR (400 MHz, DMSO-d6): 8.22 – 8.13 (bs, 2H), 7.84-7.80 (m, 1 H), 7.74 – 7.65 (m, 1 H), 7.50 – 7.41 (m, 1 H).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1H-1,2,3-Triazole is helpful to your research.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LETAVIC, Michael; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHIREMAN, Brock, T.; SWANSON, Devin; WO2012/145581; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to 00C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-4 as a yellow solid.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 288-36-8, Happy reading!

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; FLORES, Broc; SCHREIER, John, D.; WO2010/48016; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,3-Triazole

To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesium carbonate (89.26 g, 274 mmol), and copper(I) iodide (5.27 g, 27.4 mmol) in DMF (200 mL) were added N,N? -dimethylcyclohexane- 1 ,2-diamine (3.7 mL,23 .3 mmol) and 1H- 1,2,3 -triazole (18.92 g, 274 mmol). The resulting mixture was stirred at 110 C overnight, cooled, concentrated in vacuo, and diluted with water (150 mL). The aqueous layer was extracted withEtOAc (300 mL x 3). The aqueous layer was acidified with 2 N HC1 and extracted with EtOAc(300 ml. x 4). The combined organic layers were washed with brine (150 mL x 3), dried overNa2SO4, filtered, and concentrated in vacuo. The residue was purified by silica gel columnchromatography gel (petroleum ether: EtOAc = 100: 1 5 : 1) to provide the title compound asa solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (50 pag.)WO2016/100162; (2016); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The preparation method of 1- [9- (1H-1,2,4-triazol-1-yl) anthracene-10-yl] -1H-1,2,4-triazole is characterized by The organic compounds are prepared under heating conditions using 9,10-dibromoanthracene, triazole, potassium carbonate and copper oxide in a DMF polar solvent using a “one-pot” process, wherein 9,10-dibromoanthracene: Triazole: potassium carbonate: copper oxide molar ratio of 2: 10: 30: 1;

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; Tianjin Normal University; WANG, YING; (12 pag.)CN104478901; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol~2-yl)-5-methylbenzoic acid, followed by the undesired regioisomer isomer, I -(2H- 1 ,2,3-triazoI-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to O0C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-7 as a yellow solid.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BRESLIN, Michael, J.; COLEMAN, Paul, J.; COX, Christopher, D.; SCHREIER, John, D.; WHITMAN, David, B.; WO2010/48010; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A suspension of NAOH (37.86 g, 946.5 mmol), sodium iodide (94.65 g, 631.5 mmol) and 1H- [1, 2, 3] triazole (61.03 g, 883.6 mmol) in 2-methyl-2-butanol (750 mL) was refluxed for 1 h under an inert atmosphere. After cooling to room temperature the methane sulfonate (94.18 g, 631.2 mmol) was added within 5 minutes. The resulting suspension was then heated to reflux for 3 h, cooled to room temperature and concentrated in vacuo at 45 C. Water (500 mL) and dichloro methane (1 L) were added and the organic phase was separated, dried over sodium sulfate and the volatiles removed at 30 C. The residue was distilled at 1 mmHg. A forerun was collected at 20-70 C. The main fraction distilled at 123-129C as a colourless, turbid liquid. After filtration over Celite 1- BUT-3-YNYL-IH- [1, 2,3] triazole was obtained as a colourless liquid (29.77 g, 38.9 %). ‘H-NMR (CDCL3) 8 : 2.05 (t, 1H), 2.75 (dt, 2H), 4.5 (t, 2H), 7.65 (s, 1H), 7.7 (s, 1H).

This is the end of this tutorial post, and I hope it has helped your research about 288-36-8!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/96796; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,3-Triazole

Into a 3000-mL 3-necked round-bottom flask, was placed 2H-1,2,3-triazole (100 g, 1.45 mol, 1.00 equiv), water (1000 mL), Br2 (522 g, 3.27 mol, 2.25 equiv). The resulting solution was stirred overnight at 50 C. in an oil bath. The reaction was then quenched by the addition of 1000 mL of Na2SO3 (aq). The solid was collected by filtration and dried in an oven under reduced pressure. This resulted in 313 g (95%) of 4,5-dibromo-2H-1,2,3-triazole as a white solid.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; Gilead Apollo, LLC; Ghosh, Shomir; Greenwood, Jeremy Robert; Harriman, Geraldine C.; Leit De Moradei, Silvana Marcel; (290 pag.)US2017/166584; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

a) (2-(2H-1.2.3-triazol-2-yl)phenyl)methanolTo a mixture of (2-iodophenyl)methanol (1 .50 g, 6.41 mmol), 1H-1,2,3-triazole (0.797 g, 11.54 mmol), frarts-N,N’-dimethylcyclohexane-1 ,2-diamine (0.091 g, 0.641 mmol) andCs2C03 (3.76 g, 11.54 mmol) in DMF (15 mL), Cul (0.61 g, 3.20 mmol) was added and the reaction mixture was stirred for 20 min at 120C and 15 min at 160C in the microwave. The reaction mixture was cooled to rt and filtered to remove the solids. The filtrate wasconcentrated under reduced pressure. The residue was purified by flash-columnchromatography over silicagel (eluent: gradient 10%- 100% ethyl acetate/heptane) to yield the title compound (1.46 g, 64%). [1H NMR (400 MHz, DMSO-d6) delta ppm 8.10 (s, 2 H), 7.74 (d, J=7.53 Hz, 1 H), 7.61 (dd, 8.03, 1.25 Hz, 1 H), 7.52 (td, J=7.53, 1.25 Hz, 1 H), 7.44 (m, 1 H), 5.26 (t, J=5.40 Hz, 1 H), 4.59 (d, J=5.02 Hz, 2 H); LCMS RtA = 0.68, [M+Hf = 176.1].

In the meantime we’ve collected together some recent articles in this area about 1H-1,2,3-Triazole to whet your appetite. Happy reading!

Reference:
Patent; NOVARTIS AG; BADIGER, Sangamesh; BEHNKE, Dirk; BETSCHART, Claudia; COTESTA, Simona; HINTERMANN, Samuel; OFNER, Silvio; PANDIT, Chetan; ROY, Bernard Lucien; WO2012/55888; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

A) to the reactor were added successively 1mol difluorophenyl chloride, 1.2mol triazole, 0.15molCuI, 1.5mol potassium carbonate and 0.8LDMF (N, N- dimethylformamide), heated to 80 stirred 10 hours, TLC (thin layer chromatography) to detect the reaction was complete; the filtrate was filtered, concentrated under reduced pressure recovery DMF, the residue is recrystallized from ethyl acetate-white solid, that is the first product in a yield of 73% ;

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; Liu, Ke; (7 pag.)CN105777740; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H3N3

The mixture of 3-iodoaniline (3.70 g, 16.9 mmol), 1,2,3-triazole (3.91 mL, 67.6 mmol), K3PO4 (7.17 g, 33.8 mmol), fine powder Cul (1.61 g, 8.45 mmol), ethylenediamine (0.60 mL, 8.45 mmol) in 30 mL dioxane and 15 mL DMSO were refluxed for three days to yield major product 3-(2H-l,2,3-triazol-2-yl)aniline and minor product 3-(lH-l,2,3-triazol-l-yl)aniline in ratio of about 3:1. The mixture was diluted with 400 mL EtOAc, vigorously stirred, filtered through celite, washed with brine twice, concentrated in vacuo, and subjected to flash column to isolate 3-(2H-l,2,3-triazol-2-yl)aniline (1.86 g, 68% yield).

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; PORTOLA PHARMACEUTICALS, INC.; JIA, Zhaozhong J.; KANE, Brian; XU, Qing; BAUER, Shawn M.; SONG, Yonghong; PANDEY, Anjali; DICK, Ryan; WO2013/78468; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics