Category: 288-36-8

Reference of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1- (3-CHLORO-PROPOXY)-4-NITRO-BENZENE (7 g, 32.5 mmol) is dissolved in 2-methyl- 2-butanol (35 ml) followed by the addition of 1H-1, 2,3-triazole (3.43 g, 48.7 mmol), potassium iodide (0.54 g, 3.25 mmol) and sodium hydroxide (1.95 g, 48.7 mmol). The mixture is stirred for 20 h at 120 C, evaporated to dryness and suspended in toluene. Washing with water, drying over sodium sulfate and concentration in vacuo yields a crude product, which is washed with ether yielding L- [3- (4-NITRO-PHENOXY)-PROPYL]-LH- [L, 2,3] triazole as a colorless solid. Yield 6 g (75 %) MS: M = 249.3 (API+) H-NMR (400 MHz, CDC13) : 2.48 (m, 2H), 4.07 (t, J = 5.77 Hz, 2H), 4.64 (t, J = 6.7 Hz, 2H), 6.93 (d, J = 9.3 Hz, 2H), 7.56 (s, 1H), 7.72 (s, 1H), 8.20 (d, J = 9.2 Hz, 2H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/96796; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

To a solution of 2-iodobenzoic acid (3.0 g, 12.1 mmol) in DMF was added 1,2,3- triazole (1.5 g, 21.7 mmol), Cs2CO3 (7.1 g, 21.7 mmol), Cul (114 mg, 0.6 mmol), and trans-N,N?dimethylcyclohexane- 1 ,2-diamine (310 mg, 2.2 mmol). After heating at 120 C for 10 mm in amicrowave reactor, the mixture was cooled to room temperature, diluted with EtOAc, and filtered through Celite. The filtrate was concentrated in vacuo and the crude residue was purified by silica gel chromatography (MeOH in DCM with 0.1% AcOH) to give Intermediate N as the faster eluting isomer. ?H NMR (DMSO-d6, 500MHz) oe 13.05 (brs, 1 H), 8.12 (s, 2H), 7.8 1-7.52 (m, 4H).

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; ROECKER, Anthony, J.; (0 pag.)WO2016/85783; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

Step 1) Synthesis of 5-methyl-2- (2H-1, 2, 3-triazol-2-yl) benzoic acid To a solution of N, N-dimethylformamide (30 mL) were added sequentially 2H-1, 2, 3-triazole (3.45 g, 50 mmol) , 2-iodo-5-methyl benzoic acid (5.24 g, 20 mmol) , cesium carbonate (11.72 g, 36 mmol) , trans-N, N’-dimethyl-1, 2-cyclohexanediamine (0.51 g, 3.6 mmol) and cuprous iodide (0.38 g, 2 mmol) . The reaction was heated to 100 ? under N2. After reaction for 4 hours, the reaction mixture was cooled to rt, diluted with water (60 mL) and extracted with ethyl acetate (200 mL × 2) . The aqueous layer was acidified to pH 1 to 2 with concentrated hydrochloric acid, and then extracted with ethyl acetate (200 mL × 2) . The combined organic layers were dried over anhydrous sodium sulfate, and filtered. The filtrate was concentrated in vacuo and the residue was purified by silica gel column chromatography (DCM/methanol (v/v) =50/1) to give the title compound as a yellow solid (2.76 g, 68 %) .MS (ESI, neg. ion) m/z: 202.1 [M-H] -;1H NMR (CD3OD, 600 MHz) d (ppm) : 7.88 (s, 2H) , 7.66 (d, 1H) , 7.59 (d, J= 8.2 Hz, 1H) , 7.50-7.48 (dd, J = 8.1 Hz, 1.1 Hz, 1H) , 2.45 (s, 3H) ; and13C NMR (CD3OD, 151 MHz) d (ppm) : 169.8, 140.7, 137.5, 136.7, 133.5, 131.5, 129.3, 126.0, 21.0.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; JIN, Chuanfei; ZHANG, Ji; (90 pag.)WO2017/88759; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1H-1,2,3-Triazole

To a stirred solution of 1,2, 3-triazole (2.0 g, 28.9 mmol) in THF (10 mL) was added NaH (l.065g, 43.1 mmol) portion wise at 0 C under inert atmosphere. After being stirred for 45 min at 0C, 2-(trimethylsilyl)ethoxymethyl-Cl (SEM-C1; 7.6 mL, 43.1 mmol) was added to the reaction mixture. After completion of addition the reaction mixture was allowed to warm to RT and stirred for 12 h. The reaction mixture was quenched with water and extracted with ethyl acetate (2 x 100 mL). The combined organic extracts were washed with brine, dried over anhydrous Na2S04 and concentrated under reduced pressure to give crude compound. The crude material was purified by column chromatography eluting with 10% EtO Ac/hexane to afford N-2-(trimethylsilyl)ethoxymethyl- 1,2, 3-triazole (3.5 g, 17.5 mmol, 61%) as a liquid. Mass: m/z 200 [M++l].

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8

Reference:
Patent; INNOCRIN PHARMACEUTICALS, INC.; THE REGENTS OF THE UNIVERSITY OF MICHIGAN; EISNER, Joel; WAHL, Daniel; SPEERS, Corey; (111 pag.)WO2020/77197; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 1-C; 2-C2H-1.2.3-triazol-2-ylV5-methylbenzoic acid (1-5); A solution of 2-iodo-5-methylbenzoic acid (1-13, 4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in water with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid U5_, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid (IzIA)- Data for M: 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; MERCK & CO., INC.; WO2009/58238; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-36-8

In the reactor,Add 90% acetone (volume fraction) 400mL,Stirring,26.2 g of compound (01)Then 34.5 g of potassium carbonate powder was added,0.38 g copper iodide (CuI),1,2,3-triazole.External temperature was raised to 70 ,During the heating process, a large amount of gas is generated,The reaction was stirred at reflux for 5 hours.The reaction mixture was then distilled under reduced pressure at 40 C,When the reaction system is more viscous, add 45mL of water and continue to reduce the steam to distillate without acetone (no acetone in the gas phase). Distilled residue was added 300mL of water, 25% sulfuric acid was added dropwise at room temperature to adjust the pH to 1-2, a yellow suspension.Stir for 30 minutes, filter, and the solids are washed three times with water, 60 mL each. The resulting solid was dried to dryness at 70 C in vacuo,Have pale green solid 19.48g,Compound (1), purity 95.06%.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Liu Guangyuan; Fan Yuping; (6 pag.)CN104557744; (2017); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-36-8

Compound 8 was prepared by adapting a procedure described. 13 A degased solution of Pd2(dba)3 (20 mg, 90 mumol) and 2-di-tert-butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-1,1′-biphenyl (104 mg, 0.22 mmol) in toluene (6 mL) was heated at 120 C for 5 min and transferred to a degased mixture of K3PO4 (5.1 g, 24 mmol), 1,2,3-triazole (0.83 mL, 14 mmol) and 1-bromo-4-(trifluoromethoxy)benzene (1.8 mL, 12 mmol) in toluene (6 mL). The resulting mixture was heated under argon at 120 C for 24 h. CH2Cl2 (30 mL) was added, the organic phase was washed with NH4Cl-saturated water (10 mL) and brine (10 mL), and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: heptane/AcOEt 95:5) to afford the pure compound in 96% yield as a beige powder: mp <50 C; IR (ATR): 1606, 1511, 1411, 1386, 1251, 1207, 1193, 1152, 1100, 1084, 1056, 962, 949, 921, 852, 821, 731, 664 cm-1; 1H NMR (CDCl3, 300 MHz) 7.32-7.36 (m, 2H), 7.82 (s, 2H), 8.11-8.15 (m, 2H); 13C NMR (CDCl3, 75 MHz) 120.4 (2CH), 120.6 (q, C, J = 256 Hz), 122.0 (2CH), 136.0 (2CH), 138.4 (C), 148.3 (C); 19F NMR (CDCl3, 282 MHz) -58.0. The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8 Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 2,3-dichloro-5-nitropyridine (50 g, 259.08 mmol), 1H-1,2,3-triazole (19.683 g, 284.99 mmol), potassium carbonate (46.549 g, 336.81 mmol) and CH3CN (200 mL) was heated to 40 C. and stirred overnight. Ethyl acetate (500 mL) was added. The mixture was washed with water (500 mL*2) and brine (500 mL), dried over anhydrous Na2SO4, filtered, and concentrated to dryness under reduced pressure. The residue was triturated with DCM (100 mL), filtered, and the solid was collected to afford compound 1i (40 g, 68%) as an off-white solid. LC-MS: (ES, m/z): [M+1]+ 225.9. 1H NMR (400 MHz, DMSO-d6) delta ppm 9.40 (d, J=2.0 Hz, 1H), 9.15 (d, J=2.0 Hz, 1H), 8.33 (s, 2H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,3-Triazole

To a stirred solution of 1,2,3-triazole (2.0 g, 28.9 mmol) in THF (10 mL) was added NaH (1.065g, 43.1 mmol) portion wise at 0 C under inert atmosphere. After being stirred for 45 min at 0 C, 2-(trimethylsilyl)ethoxymethyl-Cl (SEM-C1; 7.6 mL, 43.1 mmol) was added to the reaction mixture. After completion of addition the reaction mixture was allowed to warm to RT and stirred for 12 h. The reaction mixture was quenched with water and extracted with ethyl acetate (2 x 100 mL). The combined organic extracts were washed with brine, dried over anhydrous Na2S04 and concentrated under reduced pressure to give crude compound. The crude material was purified by column chromatography eluting with 10% EtOAc/hexane to afford N-2- (trimethylsilyl)ethoxymethyl-l,2,3-triazole (3.5 g, 17.5 mmol, 61%) as a liquid. Mass: m/z 200 [M++l].

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; VIAMET PHARMACEUTICALS, INC.; HOEKSTRA, William, J.; SCHOTZINGER, Robert, J.; RAFFERTY, Stephen, William; WO2012/64943; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The iodide 19 (6.04 kg, 23.0 mol), THF (45 E) and DMF (9.0 E) were charged to a vessel. Copper iodide (218 g, 1.15 mol) and potassium carbonate (7.94 kg, 57.4 mol) were added and the mixture heated to an internal temperature of40 C. 1,2,3-Triazole (3.16 kg, 46.0 mol) was added as asolution in THF (6.0 E) over half an hour (no exotherm) andheating continued to 65 C. (again no exotherm observed) and the reaction monitored by HPEC. Once complete N,Ndimethylethylenediamine (244 mE, 2.30 mol) was addedand mixture cooled to RT. Aqueous 3.6 M HC1 (36 E) wasadded (exotherm) and the mixture extracted twice with ethylacetate (2×30 E). The combined organics were washed with EiC1 solution (2×20 E). The acid solution assayed for 3.79 kg of 5 (81%) and 4.64 kg of 5 and 20 combined (99%). A solution of acids 5 and 20 (approx. 4.64 kg, 22.9 mol) in THF and EtOAc (approx. 110 E) was concentrated to lowvolume. THF (90 E) was added and the solvent composition checked by ?H NMR to ensure most ethyl acetate had been removed. Sodium tert-butoxide (2.42 kg, 25.2 mol) was added slowly as a solid over 1-2 h (slight exotherm), allowing the sodium salt to form and stirred overnight at RT. The liquors showed a 45:55 ratio of product:starting material and the solid was collected by filtration, washed with THF (2×20 E) and dried in a vacuum oven (T=40 C.) for 15 h to afford 4.22 kg of crude sodium salt. The crude sodium salt (4.22 kg, 14.9 mol) was charged to a 50 E vessel and 3.6 M HC1 (21.2 E) was added with cooling. The slurry was thenstirred at room temperature for 16 h and the off-white solidisolated by filtration. The cake was washed with water (11E) and iPAc/Heptane (2×5 E), then dried in a vacuum oven(T=35 C.) for 15 h to give 3.10 kg of crude acid 5 (97.9ECAP, 92 wt %, corrected weight 2.85 kg, 61% yield from19). The acid 5 (2.85 kg corrected, 14.0 mol) was chargedto a 50 E vessel and EtOAc (28 E) and dilute 0.22 M HC1 (14 E) were added and the mixture stirred until two clear phases resulted. The aqueous layer was removed and the organic layer filtered to remove any particulate matter. Theethyl acetate was reduced to about 8 E and then heptane (15.6 E) was added over 1 h and the liquors sampled to check for appropriate losses. The solid was isolated by filtration, washed with heptane:ethyl acetate (3:1, 4 E) and dried on the filter under nitrogen to give 2.81 kg of acid 5.m.p. 167.5 C. ?H NMR (400 MHz, d5-DMSO): oe 12.09 (brs, 1H), 8.04 (s, 1H), 7.62 (d, 1H, J=8.4 Hz), 7.58 (d, 1H, J=1.2 Hz), 7.49 (dd, 1H, J=8.4, 1.2 Hz), 2.41 (s, 3H). ?3C NMR (100.6 MHz, d5-DMSO): oe 168.0, 139.2, 136.4, 135.8, 132.5, 130.3, 128.7, 124.8, 20.9. HRMS (ESI): mlz [M+H] calcd for C,0H9N302: 204.0773; found: 204.0781.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; MERCK SHARP & DOHME CORP.; Fleitz, Fred; Mangion, Ian; Yin, Jingjun; (11 pag.)US9441254; (2016); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics