Category: 27808-16-8

Electric Literature of 27808-16-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows.

Description D34: methyl 6-methyl-3-(4-methyl-2H-l,2,3-triazol-2-yl)-2- pyridinecarboxylate (D34); DMF (1.5 ml) was added to a mixture of methyl 3-iodo-6-methyl-2-pyridinecarboxylate D27 (200 mg), 4-methyl-lEta-l,2,3-triazole (120 mg, 1.444 mmol), (lR,2R)-N,N’-dimethyl- 1 ,2-cyclohexanediamine (20.54 mg, 0.144 mmol), copper(I) trifluoromethanesulfonate benzene complex (18.17 mg, 0.036 mmol) and cesium carbonate (470 mg, 1.444 mmol) in a screw-topped vial. The mixture was degassed via 3 vacuum/nitrogen cycles and heated with shaking in a PLS reaction station to 120 0C for 5 hours. The reaction mixture was evaporated to dryness under reduced pressure. The residue was dissolved in water/MeOH (1 :1, 3 ml) and acidified to pH=2 by addition of 2 M HCl solution. The resulting mixture was evaporated to dryness under reduced pressure then the residue was triturated with DCM/MeOH (3:1, 5 ml). The mixture was filtered washing with more DCM/MeOH (3:1, 5 ml). The filtrate was treated with TMS-diazomethane solution 2 M in hexane (4 ml, 8 mmol) to re-esterify the acid. The reaction mixture was evaporated under reduced pressure and the residue was purified via Biotage (20%-50% EtOAc/cyclohexane; SNAP 25 silica column) to give the title compound D34 (121 mg) as colourless solid.UPLC (Acid QC POS 50-800): rt = 0.59 minutes, peak observed: 233 (M+l) C11H12N4O2 requires 232. 1H NMR (400 MHz, CDCl3y) delta ppm 8.15 (d, 1 H), 7.59 (s, 1 H), 7.37 (d, 1 H), 3.92 (s, 3 H), 2.66 (s, 3 H), 2.40 (s, 3 H).

The chemical industry reduces the impact on the environment during synthesis 4-Methyl-1H-1,2,3-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; GLAXO GROUP LIMITED; AMANTINI, David; DI FABIO, Romano; WO2010/122151; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 27808-16-8, A common heterocyclic compound, 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 4-methyl-iH-i,2,3-triazole (500 mg,6.02 mmol), 2,3-dichloro-5-nitropyridine (1277.42 mg, 6.62 mmol), K2C03 (2491.22 mg, 18.05 mmol) in CH3CN (5 mE) was stirred at it for 12 h. The mixture was concentrated under reduced pressure, the crude product was purified by colunm chromatography over silica gel (petroleum ether ethyl acetate from 20:1 to 1:1). The desired fractions were collected and the solvent was concentrated under reduced pressure to afford i25a (1.1 g, 76.3%) as a yellow solid. ECMS (ESI) mlz M+i: 239.7. Zn (1491.96 mg, 22.95 mmol) was added to a solution of mixture of 3-chloro-2-(4-methyl-2H-i,2,3-tri- azol-2-yl)-5-nitropyridine and 3-chloro-2-(4-methyl-i H-i, 2,3-triazol-i-yl)-5-nitropyridine, i25a (1.1 g, 2.30 mmol) in aqNH4C1 (30 mE) and H20 (30 mE). The mixture was stirred at it for 16 h. To the suspension was added aq NaHCO3 to adjust to pH 9-10, and the mixture was filtered through a pad of diatomaceous earth. The filter cake was washed with CH2C12 (100 mEx3). The combined filtrates were washed with brine (200 mE), dried over MgSO4 and concentrated under reduced pressure to afford mixture of 5-chloro-6-(4-methyl-2H- 1 ,2,3-triazol-2-yl)pyridin-3-amine and 5-chloro-6-(4-methyl-i H-i ,2,3-triazol- 1 -yl)pyriF din-3-amine, 125b (1 g) as a brown solid, used directly for the next step. LCMS (ESI) mlz M+H: 209.7 P0C13 (182.86 mg, 1.19 mmol) was added to a solution of 125b (300 mg, 0.72 mmol), 1-(quinolin-5-yl)-5- (trifluoromethyl)-1 H-pyrazole-4-carboxylic acid (183.19 mg, 0.60 mmol), pyridine (117.91 mg 1.49 mmol) in CH2C12 (10 mE). The mixture was stirred at it for 2h, 50 mE H20 and 50 mE CH2C12 were added to the mixture. The organic layer was washed with brine (50 mE), dried over MgSO4 and concentrated under reduced pressure to afford the crude product, which was purified by preparative HPEC (35% to 65% (v/v) CH3CN and H20 with 0.05% HC1) and lyophilized to dryness to afford the title compound (208 mg 69.8% yield) as a white solid. ECMS (ESI) mlz M+1: 499.0. ?H NMR (400 MHz, DMSO-d5) oe ppm 11.45 (s, 1H), 9.06 (t, J=2.54 Hz, 1H), 8.89 (s, 1H), 8.60-8.75 (m, 2H), 8.33 (d, J=8.38 Hz, 1H), 7.88-8.03 (m, 3H), 7.68 (d, J=2.65 Hz, 2H), 2.34 (s, 3H).

The synthetic route of 27808-16-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 27808-16-8, Recommanded Product: 4-Methyl-1H-1,2,3-triazole

A solution of 4-methyl-iH-i,2,3-triazole (500 mg,6.02 mmol), 2,3-dichloro-5-nitropyridine (1277.42 mg, 6.62 mmol), K2C03 (2491.22 mg, 18.05 mmol) in CH3CN (5 mE) was stirred at it for 12 h. The mixture was concentrated under reduced pressure, the crude product was purified by colunm chromatography over silica gel (petroleum ether ethyl acetate from 20:1 to 1:1). The desired fractions were collected and the solvent was concentrated under reduced pressure to afford i25a (1.1 g, 76.3%) as a yellow solid. ECMS (ESI) mlz M+i: 239.7.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 27808-16-8, Computed Properties of C3H5N3

E) tert-butyl 6-methyl-5-(4-methyl-1H-1,2,3-triazol-1-yl)pyrazolo[1,5-a]pyrimidine-3-carboxylate To a solution of tert-butyl 5-chloro-6-methylpyrazolo[1,5-a]pyrimidine-3-carboxylate (607 mg) in N,N-dimethylformamide (39.8 mL) were added 4-methyl-1H-1,2,3-triazole (208 mg) and potassium carbonate (378 mg). The reaction mixture was stirred at room temperature for 2 hr, water was added, and the mixture was extracted with ethyl acetate. The extract was washed with water and saturated brine, dried over anhydrous sodium sulfate, and the solvent was evaporated under reduced pressure. The residue was purified by silica gel column chromatography (hexane/ethyl acetate) to give the title compound (167 mg). MS (API+): [M+H]+315.1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; Kawasaki, Masanori; Mikami, Satoshi; Nakamura, Shinji; Negoro, Nobuyuki; Ikeda, Shuhei; Nomura, Izumi; Ashizawa, Tomoko; Imaeda, Toshihiro; Seto, Masaki; Sasaki, Shigekazu; Marui, Shogo; Taniguchi, Takahiko; (130 pag.)US2016/159808; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 4-Methyl-1H-1,2,3-triazole

To a solution of E15 (150 mg, 0.35 mmol) in DMF (6 mL) was added Cs2C03 (343 mg, 1.05 mmol) and 4-methyl-l, 2, 3-triazole (145 mg, 1.75 mmol) at 28 C. The reaction mixture was stirred at the same temperature for 6 h. TLC showed that the starting material was consumed completely. The mixture was poured into water (20 mL), and extracted with EtOAc (10 mL *2). The combined organic layers were dried over Na2SC>4 and concentrated to give crude product. The crude product was purified by pre-HPLC to give pure 94 (35.8 mg) and a mixture of 95 and 96 (20 mg). Then the mixtue was purified by SFC to give 95 (3.9 mg) and 96 (5.6 mg). Total yield: 23.7%. The structure of the three targets was confirmed by NOE. 1H NMR (94): (400 MHz, CDC13) delta 7.42 (s, 1H), 5.19-5.08 (m, 2H), 4.13-4.09 (m, 1H), 3.53- 3.38 (m, 2H), 3.29 (s, 3H), 2.61-2.54 (m, 1H), 2.33 (s, 3H), 2.26-2.15 (m, 1H), 2.11-1.95 (m, 2H), 1.78-1.61 (m, 9H), 1.52-1.06 (m, 9H) , 1.04-0.81 (m, 2H) , 0.72 (s, 3H) . 1H NMR (95): (400 MHz, CDC13) delta 7.50 (s, 1H), 5.23-5.05 (m, 2H), 4.15-4.06 (m, 1H), 3.58- 3.42 (m, 2H), 3.31 (s, 3H), 2.71-2.61 (m, 1H), 2.33-2.14 (m, 6H), 2.12-1.96 (m, 4H), 1.34-1.18 (m, 10H), 1.06-0.83 (m, 6H), 0.70 (s, 3H) . 1H NMR (96): (400 MHz, CDC13) delta 7.35 (s, 1H), 5.22-5.02 (m, 2H), 4.15-4.10 (m, 1H), 3.56- 3.39 (m, 2H), 3.31 (s, 3H), 2.67-2.61 (m, 1H), 2.39 (s, 3H), 2.29-1.88 (m, 10H), 1.33-1.22 (m, 10H), 1.02-0.97 (m, 1H), 0.92-0.84 (m, 2H) , 0.70 (s, 3H).

According to the analysis of related databases, 27808-16-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SAGE THERAPEUTICS, INC.; MARTINEZ BOTELLA, Gabriel; HARRISON, Boyd, L.; ROBICHAUD, Albert, Jean; SALITURO, Francesco, Gerald; HERR, Robert, Jason; KARGBO, Robert, Borbo; WO2015/27227; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 27808-16-8, name: 4-Methyl-1H-1,2,3-triazole

[0009071 To a stirred solution of compound 6 (0.4mL, 1 eq) in dry DMF (3 mL), NaH (0.211 g, 1.5 eq) was added at 0 C and stirred for 15 mm followed by the addition of compoundS (0.380 g, 1.1 eq). The reaction mixture was stirred at room temperature for 30 mm. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was quenched with water and extracted with ethyl acetate (3 X 50 mL). Combined organic extracts were washed with brine, dried over anhydrous sodium sulfate and evaporated under reduced pressure. The crude product was purified by column chromatography on silica gel 100-200 mesh using 0-5% EtOAc-hexane to afford the title compound. LCMS (mlz): 205 (M + 1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; BHAGWAT, Shripad; WANG, Bing; LUEDTKE, Gregory R.; SPYVEE, Mark; (490 pag.)WO2016/57834; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C3H5N3

D) ethyl 6-methyl-5-(4-methyl-1H-1,2,3-triazol-1-yl)pyrazolo[1,5-a]pyrimidine-3-carboxylate A mixture of ethyl 5-chloro-6-methylpyrazolo[1,5-a]pyrimidine-3-carboxylate (400 mg), 4-methyl-1H-1,2,3-triazole (153 mg), potassium carbonate (277 mg) and N,N-dimethylformamide (5 mL) was stirred at room temperature overnight. The reaction mixture was poured into water at room temperature, and the mixture was extracted with ethyl acetate. The organic layer was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate/hexane) to give the title compound (106 mg). MS (API+): [M+H]+287.1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 27808-16-8, its application will become more common.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; Kawasaki, Masanori; Mikami, Satoshi; Nakamura, Shinji; Negoro, Nobuyuki; Ikeda, Shuhei; Nomura, Izumi; Ashizawa, Tomoko; Imaeda, Toshihiro; Seto, Masaki; Sasaki, Shigekazu; Marui, Shogo; Taniguchi, Takahiko; (130 pag.)US2016/159808; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 27808-16-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 27808-16-8 as follows.

To a mixture of 5-bromo-2-chloro-3-(difluoromethyl)quinoline (115 mg, 0.385 mmol) and 4-methyl-1H-1,2,3-triazole (99 mg, 1.2 mmol) in DMF (3 mL) was added K2CO3 (164 mg, 1.19 mmol). The mixture was heated at 80 C. overnight, then poured into water (30 mL) and extracted with Et2O (30 mL*3). The combined organic layers were dried over Na2SO4, filtered and concentrated under reduced pressure. The residue was purified by SiO2 gel chromatography (60% to 90% EtOAc in petroleum ether) to give the title compound as a yellow solid (109 mg, 84%). MS (ES+): C13H9BrF2N4 requires: 338, found: 339 [M+H]+.

According to the analysis of related databases, 27808-16-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Board of Regents, The University of Texas System; LE, Kang; SOTH, Michael J.; LIU, Gang; JONES, Philip; CROSS, Jason Bryant; MCAFOOS, Timothy Joseph; CARROLL, Christopher L.; LEWIS, Richard T.; (199 pag.)US2019/308978; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 27808-16-8, These common heterocyclic compound, 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Methyl-1 H-1 ,2,3-triazole (0.1 1 mL, 1 .85mmol) was added to a solution of 3-bromo-6- methylpyridine-2-carboxylic acid (200. mg, 0.930mmol) in 1 ,4-Dioxane (1 mL)/ Water (0.1 ml_), followed by Cul (8.86mg, 0.050mmol), (1 R,2R)-N 1 , N2-dimethylcyclohexane-1 ,2- diamine (26.34mg, 0.190mmol) and cesium carbonate (607.03mg, 1 .85mmol The mixture was stirred at 120 C for 5 h. Reaction mixture was cooled to room temperature and then water and MTBE were added. After vigorously stirring, the layers were separated and the aqueous one was acidified to pH 2 with HCI 6N. The acidic solution was concentrated and purified by RP on C18 column [H20 (0.1 % HCOOH)/Acetonitrile=60/40] affording 6-methyl-3-(4-methyltriazol-2-yl)pyridine-2- carboxylic acid (p64, 139 mg, y= 69% yield) as a white solid. MS (mlz): 219.2 [MH]+.

The synthetic route of 27808-16-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CHRONOS THERAPEUTICS LIMITED; MICHELI, Fabrizio; CREMONESI, Susanna; SEMERARO, Teresa; TARSI, Luca; GIBSON, Karl Richard; (116 pag.)WO2019/81939; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 27808-16-8,Some common heterocyclic compound, 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 22: 1- (2-Fluoro-4-nitro-phenyl)-4-methvl-1, 2, 31-triazole; A mixture of 4-methyl- [1, 2,3]-triazole (60 g, 0.72 mol), K2HP04 (250 g, 1.44 mol) and 3,4- difluoronitrobenzene (80 ml, 0.723 mol) in DMF (3.4 litres) was stirred at 85C under N2 for 2.5 days. After removal of DMF in vacuo, the residue was chromatographed on silica gel with 0-5% ethyl acetate in dichloromethane to give the title compound as a light yellow solid (38.3 g, 24%). The other two isomers were also isolated. 1H-NMR (CDCl3) No. _5 : 8 8.35 (m, 1H) ; 8.23 (m, 2H); 7.98 (dd, 1H); 2.48 (d, 3H)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Methyl-1H-1,2,3-triazole, its application will become more common.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2003/72575; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics