16681-65-5 -| Page 8 of 19

You Should Know Something about 16681-65-5

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 16681-65-5

Example 93: (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(3,5-dimethylisoxazol-4-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-1, 2, 3-triazole (200 mg, 2.41 mmol) was added THF (17 mL) and the solution was cooled to -43 C using a CH3CN-CQ2bath. -BuLi, (2,5 M in hexanes, 0.88 mL, 2.19 mmol) was then added dropwise to provide a white suspension. The suspension was stirred at -40 C for 20 minutes, then a homogeneous solution of (4-chloro-2-methoxy-3-(4- (trifluoromethyl)benzyl)quinolii^ (500 mg, 1.05 mmol, Intermediate 63: step b) in 2 ml, TFIF was introduced. A dark brownish solution immediately resulted. The reaction mixture was allowed to warm gradually to 0 C over 25 minutes, then was quenched with aqueous H4CI solution. The aqueous portion was extracted with EtOAc (3 x 35 mL) and the combined organics were washed with brine, dried over MgS04, filtered and concentrated to dryness. The residue was purified by FCC (20% EtOAc-hexanes increasing to 50% EtOAc) to provide the title compound as a white solid. H NMR (500 MHz,CDC ) delta 8.08 (d, J —— 2.1 Hz, 1 H), 7.85 (d, J —— 8.7 Hz, IH), 7.61 – 7.46 (m, 3H), 7.39 (d, J —— 8.1Hz, 2H), 6.94 (s, IH), 4.81 (s, IH), 4.32 (s, 2H), 4.09 (s, 3H), 3.98 (s, 3H), 1.95 (s, 3H), 1.82 (s, 3H); MS (ESI): mass calc. for Chemical Formula: C27H23CIF3N5Q3; Exact Mass: 557.1, m z found, 557.9 (M+H).

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Analyzing the synthesis route of 16681-65-5

In the meantime we’ve collected together some recent articles in this area about 1-Methyl-1H-1,2,3-triazole to whet your appetite. Happy reading!

Electric Literature of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 1-methyl-1H-1,2,3-triazole (1.47 g, 17.7 mmol, PCT Int. Appl. 2008098104) in 20 mL THF was cooled to -40 C. in a dry-ice/acetonitrile bath. n-Butyllithium (1.6 M in hexane, 10.2 mL, 16.3 mmol) was added dropwise via syringe and the mixture was stirred at -40 C. for 30 minutes. A solution of 1-methyl-1H-imidazole-5-carbaldehyde (1.50 g, 13.6 mmol) in 10 mL THF was then added and the mixture was stirred for 5 minutes, then was transferred to an ice/water bath. After 1 hour, the mixture was quenched by addition of saturated aqueous NH4Cl, diluted with water, and extracted twice with EtOAc. The aqueous phase, which contained the title compound, was then concentrated. The residue was purified by flash column chromatography (silica gel, gradient 3-10% MeOH-DCM) to afford the title compound as a light yellow foam.

In the meantime we’ve collected together some recent articles in this area about 1-Methyl-1H-1,2,3-triazole to whet your appetite. Happy reading!

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Interesting scientific research on 1-Methyl-1H-1,2,3-triazole

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Synthetic Route of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 156a: (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,4-dimethyloxazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-1 ,2,3-triazole (200 nig, 2.41 mmol, prepared according to PCX int. AppL, 2008098104) was added Tl IF (20 mL) and the colorless solution was cooled to – 40 C. Then, -BuLi (2.5 M in hexanes, 1 ,0 mL, 2.5 mmol) was added drop wise which afforded a dark reddish-brown viscous solution. The mixture was stirred at -30 C for 35 minutes, then a homogeneous THF solution of (4-chioro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6- yl)(2,4-dimethyloxazol-5-yl)methanone (500 mg, 1.05 mmol, in 4 mL THF, Intermediate 87: step b) was introduced at -20 C. The reaction mixture became a dark brown color and was then placed in an ice-water bath and allowed to warm gradually to room temperature. After 45 minutes, the mixture was quenched with aqueous NH4C1 solution and extracted with EtOAc:THF (10:2), 4 x 50 mL. The combined organies were washed with brine, dried over Na2S04, filtered and concentrated to provide a brown oil. Chromatography on silica gel (3% MeOH-DCM increasing to 5% MeOH-DCM) to provide the title compound as a faint amber solid. MS m/e558.2 [M+H]+. H NMR (400 MHz, CDGU) delta ppm 8.15 (d, J = 2.0 Hz, 1H), 7.86 (d, J = 8.8 Hz, 1 1 1). 7.54 – 7.47 (m, 3H), 7.40 (d, ./ 8.1 Hz, 2H), 7.14 (s, IH), 4.35 (s, 2H), 4.10 (s, 3H), 4.03 (s, IH), 3.92 (s, 3H), 2.40 (s, 3H), 1.54 (s, 3H).Example 156a was separated by Chirai HPLC (Chiralpak AD column, 5 uM, using EtOH to provide the first eluting enantiomer as Example 156b ‘H NMR (400 MHz, CDC13) delta ppm 8.15 id. ./ 2.1 Hz, IH), 7.86 (d, J = 8.7 Hz, IH), 7.56 – 7.46 (m, 3H), 7.40 id. ./ 8.0 Hz, 21 1). 7.14 (s, IH), 4.34 (s, 2H), 4.09 is, 31 1). 3.91 (s, M l). 2.40 (s, 31 1). 1.54 (s, 3H); and the second eluting enantiomer as Example 156c H NMR (400 MHz, CDC13) delta 8.15 (d, J = 2.1 Hz, IH), 7.86 (d, J = 8.7 Hz, I H), 7.55 – 7.48 (m, 3H), 7.40 (d, J = 8.1 Hz, 2H), 7.14 (s, IH), 4.35 (s, 2H), 4.10 (s, 3H), 3.92 (s, 3H), 2.45 (s, 3H), 1.54 is, 3H).

Interesting scientific research on C3H5N3

Intermediate 13: bis(1-methyl-1H-1,2,3-triazol-5-yl)methanoneA solution of 1 -methyl- lH-1, 2, 3-triazole (0.954 g, 11.4 mmol, prepared according to PCX Int. AppL, 2008098104) in THF (22 mL) was stirred at-70 C under argon while -BuLi (2.56 M in hexanes, 4.29 mL, 11.0 mmol) was added dropwise over 5 minutes. After stirring for another 5 minutes, a solution of ethyl mefhoxy(methyl)carbamate (0.665 g, 4.99 mmol) in THF (3 mL) wras added dropwise over 5 minutes. After stirring at ~-70 C for an additional 5 minutes, the cold bath was removed and the light slurry was allowed to warm to room temperature with stirring for 1 hour 20 minutes. The reaction was then quenched at room temperature with 5 M aqueous H4CI (3 mL) and the aqueous layer was extracted with THF (1 x 6 mL). The combined organic layers were dried (Na2S04), filtered, and concentrated. A portion of the residue was crystallized from -’30 mL toluene to provide, after washing the filter cake with ether (1 > 3 mL) and heptane (1 x 3 mL), to yield the title compound as blunt needles.

The Shocking Revelation of 16681-65-5

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 16681-65-5, and we look forward to future research findings.

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H5N3

General procedure: 1-Methylimidazole (0.49 g, 6.05 mmol) was added to a stirred solution of Key Intermediate-1 (2.3 g, 4.03 mmol) in acetonitrile (25 mL) at RT. The reaction mixture was heated to 90 C for 16 h and concentrated under reduced pressure. The crude material was triturated with diethyl ether (2 x 10 mL) to afford a brown solid (2.4g) which was used in the next steps without further purification. M/z 616.38 (M)+ TFA: H2O (9:1, 20 mL) was added to the brown solid (2.4 g) at RT. The reaction mixture was stirred for 3 h and concentrated under reduced pressure. The resulting crude product was triturated with diethyl ether (2 x 5 mL) and dried under high vacuum. The crude product was purified by preparative HPLC affording the title product as off-white solid (515 mg, 30% over 2 steps).

Reference:
Patent; Antabio SAS; DAVIES, David; LEIRIS, Simon; (56 pag.)EP3572411; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Chemical Properties and Facts of 1-Methyl-1H-1,2,3-triazole

A solution of 1-methyl-1H-1, 2, 3-triazole (3.0 g, 36.1 mmol) in anhydrous THF (100 mL) was cooled to -78 , followed by the addition of butyllithium (15.89 mL, 39.7 mmol) dropwise to give a yellow suspension. The reaction mixture was stirred at -78 for 1 h before N-methoxy-N-methylacetamide (6.52 g, 63.2 mmol) was added. The white suspension was then allowed to warm to 10 and stirred for 16 h. The reaction was quenched with MeOH. This solution was purified by column chromatography on silica gel (petroleum ether /EtOAc 3: 1to 1: 1) to give the product as a solid.1H-NMR: (Chloroform-d400MHz) delta 8.16 (s, 1H) , 4.31 (s, 3H) , 2.58 (s, 3H)

Reference:
Patent; MERCK SHARP & DOHME CORP.; ARASAPPAN, Ashok; BUNGARD, Christopher James; FRIE, Jessica L.; HAN, Yongxin; HOYT, Scott B.; MANLEY, Peter J.; MEISSNER, Robert S.; PERKINS, James; SEBHAT, Iyassu K.; WILKENING, Robert R.; (140 pag.)WO2016/29454; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Now Is The Time For You To Know The Truth About 16681-65-5

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Application of 16681-65-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Intermediate 84 (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-l ,2,3-triazole (275 mg, 3.31 mmol, prepared according to PCX Int. Appl., 2008098104) was added THF (35 mL) and the colorless solution was cooled to – 50 C. Then, kappa-butyllithium (2.5 M in hexanes, 1 ,2 mL, 3.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -20 to -10 C for 30 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4- (irifluQromethyl)benzy)quinoh (700 nig, 1.44 mmol in 4 mL THF, Intermediate 12: step f) was introduced at 0 C. The reaction mixture became a dark brown color and was allowed to warm gradually to room temperature. The mixture was stirred for 60 minutes at, room, temperature then quenched with aqueous NH4CI solution. The aqueous portion was extracted with EtOAc, 3 x 50 mL. The combined organics were washed with brine, dried over MgS04, filtered and concentrated to provide a brown oil. Chromatography on silica gel (1% MeOH-DCM increasing to 5% MeOH-DCM) provided the title compound as a light brown solid. Racemic (4~chloro-2-methoxy-3-(4~(trifluorometliyl)benzyl)quinohyl)rnethanol was separated into its individual enantiomers using the following conditions: Chiralcel OD, 20 uM (Diacel) using ethanol with 242 nM detection to give the first eluting enantiomer as Intermediate 84b and the second eluting enantiomer as Intermediate 84c.

Extracurricular laboratory: Synthetic route of 16681-65-5

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C3H5N3

To a flask containing 1-methyl-1H-1,2,3-triazole (275 mg, 3.31 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (35 mL) and the colorless solution was cooled to -50 C. Then, n-butyllithium (2.5 M in hexanes, 1.2 mL, 3.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -20 to -10 C. for 30 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)methanone (700 mg, 1.44 mmol in 4 mL THF, Intermediate 12: step f) was introduced at 0 C. The reaction mixture became a dark brown color and was allowed to warm gradually to room temperature. The mixture was stirred for 60 minutes at room temperature then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc, 3*50 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to provide a brown oil. Chromatography on silica gel (1% MeOH-DCM increasing to 5% MeOH-DCM) provided the title compound as a light brown solid. Racemic (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was separated into its individual enantiomers using the following conditions: Chiralcel OD, 20 uM (Diacel) using ethanol with 242 nM detection to give the first eluting enantiomer as Intermediate 84b and the second eluting enantiomer as Intermediate 84c.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Our Top Choice Compound: 16681-65-5

In the meantime we’ve collected together some recent articles in this area about 1-Methyl-1H-1,2,3-triazole to whet your appetite. Happy reading!

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A dry, N2 (g) flushed, 1 dram vial was charged with tetramethylammonium acetate (33.3 mg, 0.250 mmol), bis(triphenylphosphine)palladium dichloride (8.79 mg, 0.0130 mmol) and (S)-methyl 3-bromo-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H-pyrido[3,2-b]indole-7-carboxylate (60.0 mg, 0.125 mmol). To this was added 1-methyl-1H-1,2,3-triazole (20.8 mg, 0.250 mmol). The vial was again flushed with nitrogen. To this was added NMP (0.5 mL). The resulting mixture was stirred vigorously under a stream of nitrogen for 10 min. The vial was placed in a pre-heated oil bath at 95 C. and heated at that temperature overnight. The reaction was cooled to room temperature, diluted with EtOAc, washed with water (2×), then brine, dried over MgSO4, filtered, and concentrated. The residue was purified by column chromatography (100% EtOAc?1% MeOH/EtOAc) to give 39.5 mg (66%) as an off-white solid. 1H NMR (500 MHz, CDCl3) delta 8.61 (d, J=1.6 Hz, 1H), 8.50 (s, 1H), 8.47 (d, J=8.2 Hz, 1H), 8.10 (d, J=8.2 Hz, 1H), 7.82 (s, 1H), 7.75 (s, 1H), 7.53-7.45 (m, 2H), 7.42-7.35 (m, 2H), 7.35-7.30 (m, 1H), 5.63 (d, J=10.7 Hz, 1H), 4.11-4.03 (m, 4H), 3.98 (s, 3H), 3.86 (dd, J=11.7, 3.0 Hz, 1H), 3.57 (td, J=11.9, 1.7 Hz, 1H), 3.37 (td, J=11.9, 1.9 Hz, 1H), 3.22-3.09 (m, 1H), 2.11-2.01 (m, 1H), 1.72-1.59 (m, 1H), 1.50-1.38 (m, 1H), 1.07 (d, J=13.1 Hz, 1H). LCMS (M+H)=482.3.

In the meantime we’ve collected together some recent articles in this area about 1-Methyl-1H-1,2,3-triazole to whet your appetite. Happy reading!

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; Norris, Derek J.; Delucca, George V.; Gavai, Ashvinikumar V.; Quesnelle, Claude A.; Gill, Patrice; O’Malley, Daniel; Vaccaro, Wayne; Lee, Francis Y.; DeBenedetto, Mikkel V.; Degnan, Andrew P.; Fang, Haiquan; Hill, Matthew D.; Huang, Hong; Schmitz, William D.; Starrett, JR., John E.; Han, Wen-Ching; Tokarski, John S.; Mandal, Sunil Kumar; (220 pag.)US2016/176864; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New downstream synthetic route of 16681-65-5

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-65-5.

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 16681-65-5

n-BuLi (1.23 M in hexanes, 1.1 mL, 1.35 mmol) was added dropwise to a stirred slurry of 1-methyl-1,2,3-triazole (112 mg, 1.35 mmol) in THF (1 mL) at -40 C. under nitrogen. After stirring for another 30 minutes, the mixture was treated dropwise with a solution of (4-chloro-3-isopropoxy-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (252 mg, 0.67 mmol, Intermediate 27) in THF (5 mL). The reaction was allowed to warm to room temperature over 1 hour. The reaction was then quenched with saturated aqueous NH4Cl. The mixture was poured into a separatory funnel and extracted with DCM (4*60 mL). The organics were combined, washed with brine, dried (Na2SO4), filtered and concentrated to dryness to afford a light yellow oil. The crude material was purified by FCC (1-7.5% MeOH/DCM) followed by reverse-phase HPLC (acetonitrile/water+NH4OH) to provide the title compound as a white solid. 1H NMR (400 MHz, CDCl3) delta ppm 8.08 (d, J=2.2 Hz, 1H), 7.78 (d, J=8.7 Hz, 1H), 7.33 (dd, J=8.6, 2.2 Hz, 1H), 7.18 (s, 1H), 6.18 (s, 1H), 4.74-4.67 (m, 1H), 4.32 (s, 1H), 4.13 (s, 3H), 3.94 (s, 3H), 3.39 (s, 3H), 2.32 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.0 [M+H]+. [4-Chloro-2-methoxy-3-(1-methylethoxyl)quinolin-6-yl](1,2-dimethyl-1H-imidazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was purified by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 muM 250*20 mm, Mobile phase: 70% CO2, 30% MeOH/iPrOH 50/50 v/v+(0.3% iPrNH2)) to give 2 enantiomers. The first eluting enantiomer was Example 80b: 1H NMR (400 MHz, CDCl3) delta ppm 8.09 (d, J=2.2 Hz, 1H), 7.77 (d, J=8.7 Hz, 1H), 7.32 (dd, J=8.7, 2.2 Hz, 1H), 7.17 (s, 1H), 6.17 (s, 1H), 4.75-4.66 (m, 1H), 4.36 (s, 1H), 4.13 (s, 3H), 3.94 (s, 3H), 3.39 (s, 3H), 2.32 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.2 [M+H]+ and the second eluting enantiomer was Example 80c: 1H NMR (400 MHz, CDCl3) delta ppm 8.06 (d, J=2.2 Hz, 1H), 7.80 (d, J=8.7 Hz, 1H), 7.35-7.32 (m, 1H), 7.21 (s, 1H), 6.24 (s, 1H), 4.74-4.67 (m, 1H), 4.13 (s, 3H), 3.95 (s, 3H), 3.52 (s, 1H), 3.42 (s, 3H), 2.37 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.2 [M+H]+.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics