Category: 15294-81-2

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2HBr2N3

15.38 g (67.79 mmol) of 4,5-dibromo-1H-1,2,3-triazole, 24.80 g (203.38 mmol) of phenylboronic acid, 7.83 g (6.78 mmol) of tetrakis(triphenylphosphine)palladium(0), and 18.74 g (135.59 mmol) of potassium carbonate were added to a mixed solution including 170 mL of tetrahydrofuran and 70 mL of water, and stirred under reflux. After the reaction was completed, the reaction product was cooled to room temperature, and an aqueous solution layer was removed therefrom by extraction. The resultant was filtered under reduced pressure through silica gel, and the filtrate was concentrated under reduced pressure. The product obtained therefrom was separated by silica gel column chromatography to obtain 7.31 g (yield of 49%) of Intermediate (D). (0279) LC-Mass (Calcd: 221.10 g/mol, Found: M+1=222 g/mol)

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 15294-81-2, and we look forward to future research findings.

Reference:
Patent; Samsung Electronics Co., Ltd.; Samsung SDI Co., Ltd.; KWON, Eunsuk; KIM, Sangmo; KIM, Jongsoo; SON, Jhunmo; JEON, Soonok; CHUNG, Yeonsook; JUNG, Yongsik; CHWAE, Jun; (150 pag.)US2019/334095; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C2HBr2N3

Example 160: Preparation of 4,5-dibromo-l-methyl-lH-[1.2.31triazole and 4,5-dibromo- 2-methyl-2H-r 1 ,231triazole(A) (B)To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 159) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched with aqueous ammonium chloride (saturated, 15 ml). The organic extract was dried over magnesium sulfate and concentrated and the residue was purified by column chromatography on silica gel (eluent 10-30% ethyl acetate in hexane) to give 4,5-dibromo-2- methyl-2H-[l ,2,3]triazole (isomer B) (625 mg, 26% yield) and 4,5-dibromo- 1-methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34% yield). Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 15294-81-2

Reference:
Patent; SYNGENTA LIMITED; WO2007/71900; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 15294-81-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The reaction was performed according to the preparation of compound 2 by using deuterium oxide instead of water to give the desired product as a white solid (95 mg, 64percent yield). FontWeight=”Bold” FontSize=”10″ 1H NMR (400 MHz, DMSO-d6) No notable peak was observed. 13C NMR (100 MHz, DMSO-d6) delta 130.5, 120.4 ppm. HRMS calculated for [C2HDBrN3+H]+ 148.9568, found: 148.9566.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4,5-Dibromo-1H-1,2,3-triazole is helpful to your research.

Reference:
Article; Sakurada, Isao; Tetrahedron Letters; vol. 58; 32; (2017); p. 3188 – 3190;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 15294-81-2 as follows. Recommanded Product: 4,5-Dibromo-1H-1,2,3-triazole

A mixture of A-6.1 (2.00 g, 11.0 mmol), A-6.2 (3.88 g, 17.1 mmol), Cul (0.13 g, 0.68 mmol), A-6.3 (0.15 mL, 1.03 mmol) and K2003 (2.36 g, 17.1 mmol) in dry DMF (10 mL) isheated to 12000 by microwave for 40 mm. The mixture is poured into water and extracted with Et20. The aq. phase is acidified with HCI (4M aq. solution) and extracted with EA. The combined organic phases are dried and concentrated to give the crude product which is purified by flash column chromatography on silica gel (using a solvent gradient from 100percent EA to EAIMeOH = 9/1) to provide 3.6 g of A-6.4. APCI+/-: 365 [M+H] HPLC (Rt): 1.10 mm (methodG).

According to the analysis of related databases, 15294-81-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta, Friederike; LIPINSKI, Radoslaw; SCHEUERER, Stefan; (50 pag.)WO2019/25275; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C2HBr2N3

Step 1 : A mixture of A-21.1 (2.00 g, 1 1 .0 mmol), A-21.2 (3.88 g, 17.1 mmol), Cul (0.13 g, 0.68 mmol), A-21.3 (0.15 mL, 1 .03 mmol) and K2C03 (2.36 g, 17.1 mmol) in dry DMF (10 mL) is heated to 120°C by microwave for 40 min. The mixture is poured into water and extracted with Et20. The aq. phase is acidified with HCI (4M aq. solution) and extracted with EA. The combined organic phases are dried and concentrated to give the crude product which is purified by flash column chromatography on silica gel (using a solvent gradient from 100percent EA to EA/MeOH = 9/1 ) to provide 3.6 g of A-21.4. APCI+/-: 365 [M+H]+; HPLC (Rt): 1.10 min (method (0304) N).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 15294-81-2.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta; NICHOLSON, Janet Rachel; PEKCEC, Anton; SCHEUERER, Stefan; (69 pag.)WO2017/178341; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., Formula: C2HBr2N3

Example 121: Preparation of 4,5-dibromo-l-methyl-lH-[l,2,3″|triazole and 4,5-dibromo- 2-methyl-2H-[l .2.31triazole(A) (B) To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 120) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched by addition of aqueous ammonium chloride (saturated) (15 ml). The phases were separated and the organic phase was dried over magnesium sulfate and concentrated. The residue was purified by column chromatography on silica gel (eluent: 10-30% ethyl acetate in hexane) to give 4,5-dibromo-2-methyl-2H-[l,2,3]triazole (isomer B) (625 mg, 26% yield) and 4,5-dibromo- 1 -methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34% yield).Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 15294-81-2.

Reference:
Patent; SYNGENTA LIMITED; WO2007/96576; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 15294-81-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 15294-81-2 name is 4,5-Dibromo-1H-1,2,3-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: The reaction was performed according to the preparation of compound 2 by using deuterium oxide instead of water to give the desired product as a white solid (95 mg, 64percent yield). FontWeight=”Bold” FontSize=”10″ 1H NMR (400 MHz, DMSO-d6) No notable peak was observed. 13C NMR (100 MHz, DMSO-d6) delta 130.5, 120.4 ppm. HRMS calculated for [C2HDBrN3+H]+ 148.9568, found: 148.9566.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4,5-Dibromo-1H-1,2,3-triazole, and friends who are interested can also refer to it.

Reference:
Article; Sakurada, Isao; Tetrahedron Letters; vol. 58; 32; (2017); p. 3188 – 3190;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 15294-81-2, The chemical industry reduces the impact on the environment during synthesis 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, I believe this compound will play a more active role in future production and life.

Example 160: Preparation of 4,5-dibromo-l-methyl-lH-[1.2.31triazole and 4,5-dibromo- 2-methyl-2H-r 1 ,231triazole(A) (B)To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 159) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched with aqueous ammonium chloride (saturated, 15 ml). The organic extract was dried over magnesium sulfate and concentrated and the residue was purified by column chromatography on silica gel (eluent 10-30percent ethyl acetate in hexane) to give 4,5-dibromo-2- methyl-2H-[l ,2,3]triazole (isomer B) (625 mg, 26percent yield) and 4,5-dibromo- 1-methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34percent yield). Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Dibromo-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SYNGENTA LIMITED; WO2007/71900; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 15294-81-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 15294-81-2 as follows.

A mixture of 4,5-dibromo-1,2,3-triazole (1.0 mmol, 227 mg) and Na2SO3 (3.0 mmol, 378 mg) in water (3.0 mL) was stirred at 100 C (hot plate) for 3 days. The mixture was cooled to rt, then extracted with ethyl acetate (5 mL x 2). The combined extract was dried over Na2SO4, filtered, and concentrated in vacuo. The residue was crystallized from ethyl acetate and heptane to give the desired product as a white solid (99 mg, 67% yield). 1H NMR (400 MHz, DMSO-d6) delta 8.10 (s, 1H) ppm. 13C NMR (100 MHz, DMSO-d6) delta 130.6, 120.5 ppm. HRMS calculated for [C2H2BrN3+H]+ 147.9505, found: 147.9502.

According to the analysis of related databases, 15294-81-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Sakurada, Isao; Tetrahedron Letters; vol. 58; 32; (2017); p. 3188 – 3190;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., Recommanded Product: 15294-81-2

EXAMPLE 4 1(2 or 3)-N,N-Diethylcarbamyl-4,5-dibromo-1H-1,2,3-triazole STR13 To a suspension of 213 milligrams (mg) (8.89 mmoles) of sodium hydride in 20 ml of anhydrous tetrahydrofuran was added 2 g (8.89 mmoles) of 4,5-dibromo-1H-1,2,3-triazole. The resulting suspension was cooled to 0¡ã C. and 1.2 g (8.89 moles) of N,N-diethylcarbamoyl chloride was added by drop. The reaction mixture was heated to reflux overnight and the precipitated sodium chloride was removed by filtration. Concentration of the filtrate in vacuo gave 2.4 g (82percent) of 1(2 or 3)-N,N-diethylcarbamyl-4,5-dibromo-1H-1,2,3-triazole as a yellow oil. The structure was confirmed by n.m.r. and I.R.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Stauffer Chemical Company; US4596596; (1986); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics