Category: 1157938-97-0

Reference of 1157938-97-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1157938-97-0 name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A 2-neck flask was charged with zinc (5.8 g, 89 mmol, 2.0 eq.) under a nitrogen atmosphere and anhydrous THF (101 mL) and then trimethylsilylchloride (TMSC1, 1.12 mL) were added. The resulting suspension was stirred at room temperature for 30 minutes and then cooled to 0 C. Subsequently, ethyl-2-bromopropionate (5.8 mL, 8.1 g, 44.7 mmol, 1.0 eq.) was dosed to the suspension in a drop wise fashion over 30 minutes. The reaction mixture was stirred for an additional 15 minutes and then filtered under a nitrogen atmosphere into a Schlenk vessel to remove residual zinc. Ketone III (Ri = F, 1.0 g, 4.5 mmol, 1.0 eq.) was charged into a Schlenk vessel and anhydrous THF (10 mL) was added under a nitrogen atmosphere. To the resulting solution was added 20 mL of the previously prepared stock solution of Reformatsky reagent (vide supra, 8.36 mmol, 1.9 eq.) in a dropwise fashion over 30 minutes at room temperature while stirring. After completion of the addition the resulting reaction mixture was stirred under a nitrogen atmosphere for 36 hours (clear solution). GC-analysis showed that the ester I (Ri = F) had formed with 80% conversion based on ketone III (Ri = F) and a d.e. of 60% in favor of the desired RR/SS diastereomer. The reaction mixture was concentrated in vacuo to a volume of 10 mL after which w-heptane was added until formation of a solid was observed. The resulting suspension was stirred for 16 hours after which the solid was isolated through filtration. The solid was then dissolved in a mixture of aqueous HC1 (pH = 1) and ethyl acetate resulting in a clear biphasic system. The phases were separated and the aqueous layer was extracted with ethyl acetate (2x). The combined organic layers were washed with water and brine, dried (Na2S04), filtered and concentrated in vacuo to give racemic RR/SS ester I (Ri = F) as a light yellow solid with > 99% d.e. as determined by GC.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, and friends who are interested can also refer to it.

Reference:
Patent; BASILEA PHARMACEUTICA AG; VAN SUMMEREN, Ruben; VAESSEN, Harrie; MINK, Daniel; WASER, Mario; WO2014/23623; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1157938-97-0 as follows. category: Triazoles

To a solution of diisoproplylamine (120 g) in dry THF (1500 ml) 1.6 M solution of butyllithium in hexane (730 ml) was slowly added at -40 C. under nitrogen atmosphere. The mixture was allowed to warm up to -20 C. for ca. 10 min, then re-cooled to -78 C. and to this LDA-solution N,N-bis(2,4-dimethoxybenzyl)thiopropionamide (390 g), dissolved in dry THF (500 ml) was slowly added that the reaction temperature did not exceed -40 C. (exothermic reaction, cooling). After addition the mixture was stirred at -40 C. for ca. 1 hr, then at this temperature 1-(2,5-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone (223 g), dissolve in dry THF (400 ml), was slowly added, the reaction mixture stirred for another 2 hrs, then within ca. 1 hr warmed up to -20 C. and finally poured on an aqueous phosphate buffer solution (pH 7). The aqueous phase was extracted 3 times with ethylacetate (500 ml) and the combined organic phases dried twice with sodium carbonate, filtered and evaporated under reduced pressure providing 3-(2,5-difluorophenyl)-3-hydroxy-2-methyl-4-(1H-1,2,4-triazol-1-yl)-N,N-bis(2,4-dimethoxybenzyl)thiobutyramide: 590 g (96% yield) as a single diastereomer. This crude material was dissolved at 0 C. under cooling in a mixture of methylenechloride (1000 ml) and triflic acid (150 g) and slowly triethylsilane (500 g) was added within ca. 3 hrs keeping the temperature under 10 C. After the reduction was finished the reaction mixture was poured very slowly on aqueous saturated sodium bicarbonate solution, extracted 3 times with ethylacetate (500 ml), dried with sodium sulphate, filtered and evaporated under reduced pressure providing the crude title compound: 250 g (80% yield). The analytical data were identical with published one for (2R,3R)-enantiomer in U.S. Pat. No. 6,300,353 and WO99/45008.

According to the analysis of related databases, 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Carbo-Design LLC; US2011/87030; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1157938-97-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, This compound has unique chemical properties. The synthetic route is as follows.

A 2-neck flask with cooler was charged with zinc (1.1 g, 17 mmol, 3.8 eq.) and heated in vacuo using a hotgun (3 nitogen-vacuum cycles). Subsequently, THF (60 mL) was added and then trimethylsilylchloride (0.15 mL). The resulting suspension was stirred under a nitrogen atmosphere at room temperature for 15 minutes, after which a solution of ketone III (Ri = F, 1.0 g, 4.5 mmol, 1.0 eq.) in THF (30 mL) was added. The reaction mixture was then heated to 66 C, after which the heating source was removed. Subsequently, a solution of ethyl-2-bromopropionate (0.87 mL, 1.2 g, 6.7 mmol, 1.5 eq.) in THF (20 mL) was added dropwise over 10 minutes. The reaction mixture was then stirred at 66 C for 1.5 hours, after which it was cooled to room temperature. The reaction was quenched by addition of a saturated aqueous ammoniumchloride solution (100 mL) and diluted with methyl-teributyl ether (MTBE, 100 mL). The layers were separated and the aquous layer was extracted with MTBE (2x 100 mL). The combined organic layers were washed with brine (100 mL), dried (Na2S04), filtered and concentrated in vacuo to give a yellow oil (1.4 g) containing racemic ester I. ^-NMR- and GC-analysis showed a conversion of ketone III (Ri = F) of 80% and a d.e. of ester I of 60% in favor of the desired RR/SS-diastereomer. The product was not purified further.

The chemical industry reduces the impact on the environment during synthesis 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone. I believe this compound will play a more active role in future production and life.

Reference:
Patent; BASILEA PHARMACEUTICA AG; VAN SUMMEREN, Ruben; VAESSEN, Harrie; MINK, Daniel; WASER, Mario; WO2014/23623; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone

Propionitrile (11 g, 0.200 mmol) was dissolved in 100 mL of anhydrous THF.Replace with nitrogen three times and slowly add at -78CBistrimethylsilyllithium200 mL (1M) of tetrahydrofuran solution, stir for 10 min, then add magnesium bromide (46 g, 0.25 mmol),After stirring for 20 min, 1-(2,5-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone (22.3 g, 0.100 mmol) was added and slowly raised. To -50 C, then the solution is stirred for 2 hours,Until the disappearance of the raw material, 100 mL saturated ammonium chloride solution and 150 mL ethyl acetate were added.Extract twice, combine the organic phases, and wash three times with saturated saline solution.The organic phase was dried, spin-dried and passed through a column of silica gel (PE:EA=1:2) according to formula (I)23.6 g (yield: 84.9%, d.e. >99%) of de(2S,3R) and (2R,3S) white solids were mixed.The resulting solid was dissolved in 50 ml toluene, 100 ml methyl tert-butyl ether andIn a mixed solvent of 20 mL of methanol, D-10-camphorsulfonic acid (19.7 g, 84.91 mmol) was added.Heat the reaction to 60 C, react for 1h, slowly cool and cool, filter,Obtain a white solid, then add water, stir with sodium bicarbonate, extract with dichloromethane,The organic phase was concentrated to obtain the diastereoisomer of (2S,3R) 8.49 g according to formula (I)(Yield: 35.9%, e.e. >99%, d.e. >99%) LC-MS of the resulting compoundThe result of H-NMR measurement is the same as that described in Example 2.

According to the analysis of related databases, 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Liu Meijun; (18 pag.)CN106317044; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1157938-97-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1157938-97-0 as follows.

(B) in a three neck reaction flask, propionitrile was added 4mol, 0.1mol catalyst (containing primary amine 0.05molC-9 cinchona alkaloids, 0.05mol formula and copper pigment base formula),Benzoic acid and 0.1mol 0.5LN, N- dimethylacetamide (the DMA), cooled to -10 , stirring the first solution containing 1mol product 0.3LN, N- dimethylacetamide solution, at -10 8 hours of reaction, TLC the reaction was complete, a solution of a concentration of 1mol / 0.3L L hydrochloric acid the reaction was quenched with 0.2L ethyl acetate three times, the combined organic phase was dried over anhydrous sodium sulfate, and concentrated under reduced pressure, the resulting oil was treated with n-heptane / methylene chloride (1/1 by volume) was recrystallized, filtered and dried to give an off-white solid, i.e. a second product, yield 80%, dr is 97:3.;

According to the analysis of related databases, 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Liu, Ke; (7 pag.)CN105777740; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1157938-97-0, name: 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone

a) Preparation of a Stock-solution of lithium-diisopropylamide (LDA) in tetrahydrofuran (THF): Diisopropylamine (716 mg, 7,1 mmol, 1.05 eq) was dissolved in anhydrous THF (21.3 mL) and the resulting solution was cooled to -78 C under a nitrogen atmosphere. Subsequently, -BuLi (2,7 M solution in w-heptane, 2.5 mL, 6.7 mmol, 1,0 eq) was added in a drop wise fashion over 15 minutes and the reaction mixture was stirred at -78 C for an additional 15 minutes. Then the solution was warmed to 0 C and stirred for 30 minutes after which the stock solution was cooled to -78 C again, b) Coupling reaction: The thus obtained LDA-solution (3,66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C under a nitrogen atmosphere. The resulting mixture was stirred at -78 C for 30 minutes and then l-(2,5-difluorophenyl)-2-(lH-l,2,4-triazol-l-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4C1 and ethylacetate. The aqueous layer was extracted with ethylacetate (2x) and the combined organic layers were washed with brine, dried (Na2S04), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BASILEA PHARMACEUTICA AG; VAN SUMMEREN, Ruben; VAESSEN, Harrie; MINK, Daniel; WASER, Mario; WO2014/23623; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1157938-97-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1157938-97-0 as follows.

The thus obtained LDA-solution (3.66 mL, 0.98 mmol, 1.1 eq) was transferred to a Schlenk vessel and ethylpropionate (100 mg, 0.98 mmol, 1.1 eq.) was added in a drop wise fashion at -78 C. under a nitrogen atmosphere. The resulting mixture was stirred at -78 C. for 30 minutes and then 1-(2,5-difluorophenyl)-2-(lII-1,2,4-triazol-1-yl)ethanone (200 mg, 0.90 mmol, 1.0 eq.) in THF (3.66 mL) was added in a drop wise fashion over 15 minutes. The reaction mixture was stirred for 2 hours at -78 C. and then quenched with acetic acid and warmed to room temperature. The mixture was diluted with aqueous saturated NH4Cl and ethylacetate. The aqueous layer was extracted with ethylacetate (2¡Á) and the combined organic layers were washed with brine, dried (Na2SO4), filtered and concentrated in vacuo to give a yellow oil containing the racemic ester I with a diastereomeric excess of 29% in favour of the desired RR/SS diastereomer. Further purification by column chromatography (n-heptane/EtOAc/MeOH 60/40/5 v/v/v) provided the RR/SS diastereomer (light yellow solid) as well as the RS/SR diastereomer (off-white solid) in a combined overall yield of 179 mg (0.55 mmol, 61%).

According to the analysis of related databases, 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Basilea Pharmaceutica AG; Van Summeren, Ruben; Vaessen, Harrie; Mink, Daniel; Waser, Mario; (11 pag.)US2019/77771; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone

Indium powder (15.4 g, 133.8 mmol) was dissolved in dry THF (150 mL).Replace with nitrogen three times, then cool to 0C and slowly add(S)-2-Bromo-propionitrile (8,90,66.9 mmol) stirring for 30 min,Then slowly adding 1-(2,5-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone dissolved in(9.95 g, 44.6 mmol) of dry THF (15 mL) was stirred at -10C for 10 hours,Until the disappearance of raw materials, filtration, the filtrate was added 200mL of n-hexane stirring for 40min,Cool, filter, wash with water, and dry to obtain (2S, 3R) andA mixture of (2R, 3S) 11.1 g, (yield 89.5%, d.e. > 99.2%).The resulting white solid was dissolved in 20 ml of toluene, 40 ml of methyl tert-butyl ether andIn a mixed solvent of 10 mL methanol,Add D-10-camphorsulfonic acid (7.09 g, 30.56 mmol) to heat the reaction to 60C,After reacting for 1 h, slowly cooling and cooling, filtering to obtain a white solid, then adding water,Stir with sodium bicarbonate and extract with dichloromethane.The organic phase was concentrated to obtain 9.4 g of the (2S,3R) diastereoisomer according to Formula (I).(Yield: 84.7%, e.e. > 99.1%, d.e. > 99.2%).The results of the LC-MS and H-NMR measurements of the resulting compound were the same as those described in Example 2.

The synthetic route of 1157938-97-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Liu Meijun; (18 pag.)CN106317044; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 1157938-97-0

To a solution of diisopropylamine (11 g) in dry THF (100 ml) 1.6 M solution of butyllithium in hexane (63 ml) was slowly added at -78 C. under nitrogen atmosphere. The mixture was allowed to warm up to -30 C., then re-cooled to -78 C. before propionitrile (5.4 g) was slowly added (exothermic reaction, cooling). The mixture was stirred at this temperature for ca. 15 min, 1-(2,5-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone (10 g) was added, the reaction mixture warmed up to -20 C. within ca. 1 hr and finally poured on aqueous solution of phosphate buffer (pH 7). The aqueous phase was extracted 3 times with ethylacetate (300 ml) and the combined organic phase was twice with water, dried with sodium carbonate, filtered and evaporated under reduced pressure providing the title compound: 9 g. The analytical data were identical with published in U.S. Pat. No. 6,300,353 and WO99/45008 for (2S,3R)-enantiomer.

According to the analysis of related databases, 1157938-97-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Carbo-Design LLC; US2011/87030; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1157938-97-0,Some common heterocyclic compound, 1157938-97-0, name is 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, molecular formula is C10H7F2N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under nitrogen, in a 250 ml three-necked flaskZinc powder (11.7 g, 179 mmol, 4.0 eq.) AndTHF (200 ml), TMSCl (2.25 ml) was added,Stirring 30min at room temperature, ice salt bath temperature to 0 ,Ethyl 2-bromopropionate (11.6 mL, 89.6 mmol, 2.0 eq.) Was added dropwise and stirring was continued at 0 C for 30 min,The suspended matter was filtered off under nitrogen flow,The filtrate was transferred to a 500 ml three-neck flask;1- (2,5-difluorophenyl) -2- (1 -hydro-1,2,4-triazol-1-yl) ethanone (10 g, 44.8 mmol, 1.0 eq.Was dissolved in THF (130 ml)The filtrate (200 ml) was added dropwise at room temperature, and the stirring was continued for 72 hours.A solid was produced and filtered to give an off-white solid,3-hydroxy-2-methyl-4- (1 -hydro-1,2,4-triazol-1-yl) butanoic acid ethyl ester;A mixture of crude ethyl 3- (2,5-difluorophenyl) -3-hydroxy-2-methyl-4- (1 -hydro- 1,2,4-triazol-(12.7 g) was suspended in EA (100 mL)Water (50 mL) was added, and when pH = 1 was adjusted with 6N hydrochloric acid,Into a clear two-phase, liquid separation, aqueous phase with EA (50mL)Extraction was carried out twice, the EA phase was combined, washed with saturated brine,Dried over anhydrous sodium sulfate, filtered, concentrated,To give a pale yellow solid, i. EEthyl 3- (2,5-difluorophenyl) -3-hydroxy-2-methyl-4- (1 -hydro-1,2,4-triazol-1-yl) butanoate Purified product(8.8 g, 27 mmol, 60% yield, greater than 99% d.e.).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-(2,5-Difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethanone, its application will become more common.

Reference:
Patent; Sichuan Kelun Drug Research Institute Co., Ltd.; Chen, Li; Duan, Jilong; Li, Yang; Li, Donghong; Ge, Jianhua; Wang, Lichun; Hu, Siyu; Zhao, Dong; Wang, Jingyi; Huang, Qingdong; (14 pag.)CN105801500; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics