An article Screening for extractables in additive-manufactured acrylonitrile butadiene styrene orthopedic cast WOS:000518866700047 published article about 3D; EMISSIONS; LEACHABLES; COMPONENTS; MIGRATION; PRINTERS; RELEASE; DEVICES; TISSUES; DESIGN in [Nahan, Keaton; Sussman, Erie M.; Wickramasekara, Samanthi] US FDA, Ctr Devices & Radiol Hlth, 10903 New Hampshire Ave, Silver Spring, MD 20993 USA; [Schultheis, Lester] Univ Maryland, Fischell Dept Bioengn, Robert E Fischell Med Device Inst, 8278 Paint Branch Dr, College Pk, MD 20742 USA in 2020.0, Cited 48.0. The Name is 1H-1,2,4-Triazol-5-amine. Through research, I have a further understanding and discovery of 61-82-5. HPLC of Formula: C2H4N4
The use of additive-manufactured components in medical applications, specifically medical devices (e.g., orthopedic casts), has increased in recent years. Such devices may be fabricated at the point of care using consumer-grade additive manufacturing. Limited studies have been conducted to evaluate the extractable substances of these devices. Chemical characterization followed by toxicological risk assessment is one means of evaluating safety of devices. This study was designed to determine the extractables profile of additive-manufactured materials according to filament grade and post-processing method. Feedstocks for additive manufacturing were tested as filament and manufactured casts, while the cast from consumer-grade filament (CGF) was post-processed. Samples were extracted using three solvents of varying polarities. Extracts were analyzed by gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/mass spectrometry (LC/MS) techniques. In GC/MS analysis, isopropanol extracts generated fewer compound identifications for USP Class VI filament (USPF)-based casts (3) compared with the respective filament (17) while hexane generated the most compound identifications for the finished cast manufactured from CGF. CGF was found to have the highest number of nonvolatile extractables for isopropanol (15) and hexane (34) by positive ion LC/MS. Additionally, CGF produced more non-polar extractables in hexane than the USPF. A known polymer byproduct and potential genotoxicant, styrene acrylonitrile (SAN) trimer, was one of the compounds identified in both GC/MS and LC/MS at quantities ranging from 19 to 270 mu g g(-1). Overall these results suggested that the extractables profile was affected by the filament material, printing procedure, and post-processing method.
HPLC of Formula: C2H4N4. Bye, fridends, I hope you can learn more about C2H4N4, If you have any questions, you can browse other blog as well. See you lster.
Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics