6-Sep-21 News What Kind of Chemistry Facts Are We Going to Learn About 49607-51-4

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,4-triazol-3-amine.

Application of 49607-51-4, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Triphosgene (0.588 g, 1.982 mmol) was added to a stirred solution of (4S)-7-(2-methylpyridin-4-yl)-2,3,4,5-tetrahydro-1,4-methanopyrido[2,3-b][1,4]diazepine (0.5 g, 1.982 mmol) in tetrahydrofuran (20 mL) at 0° C. and stirred for 30 min. Triethylamine (0.829 mL, 5.94 mmol) and 1-methyl-1H-1,2,4-triazol-3-amine (0.486 g, 4.95 mmol) was added at 0° C. The reaction mixture was stirred for 48 h at 70° C. The reaction mixture was cooled to 28° C., and was partitioned between water (50 mL) and DCM (50 mL). The separated organic layer was washed with water and brine. The organic layer was dried over anhydrous Na2SO4, filtered and filtrate was evaporated to afford crude yellow solid (TLC eluent: 10percent MeOH in EtOAc: Rf-0.3; UV active). The crude compound was purified by (100-200 mesh) silica gel and was eluting with 5percent MeOH in ethyl acetate to afford (4S)?N-(1-methyl-1H-1,2,4-triazol-3-yl)-7-(2-methylpyridin-4-yl)-3,4-dihydro-1,4-methanopyrido[2,3-b][1,4]diazepine-5(2H)-car-boxamide (0.215 g, 0.563 mmol, 28.4percent yield) as light yellow solid, LCMS (m/z): 377.28 [M+H]+. 1H NMR (400 MHz, DMSO-d6): delta 13.44 (s, 1H), 8.55 (d, J=5.2 Hz, 1H), 8.36 (s, 1H), 7.96 (s, 1H), 7.86-7.61 (m, 3H), 5.44 (dd, J=5.8, 3.0 Hz, 1H), 3.83 (s, 3H), 3.27 (d, J=30.5 Hz, 3H), 2.95 (dd, J=12.0, 3.2 Hz, 1H), 2.59 (s, 3H), 2.23 (ddt, J=16.9, 9.7, 4.4 Hz, 1H), 1.91 (dt, J=14.7, 7.4 Hz, 1H).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,4-triazol-3-amine.

Reference:
Patent; BLUM, Charles A.; Caldwell, Richard Dana; Casaubon, Rebecca; Disch, Jeremy S.; Fox, Ryan Michael; Koppetsch, Karsten; Miller, William Henry; NG, Pui Yee; Oalmann, Christopher; Perni, Robert B.; Szczepankiewicz, Bruce G.; White, Brian; US2015/152108; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

6-Sep-2021 News Brief introduction of 1533519-84-4

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione

Ethanol 620g was first added to a 1L four-necked flask at room temperature.Compound IV (106.9 g, 0.4 mol) was added with stirring and compound Vc (57 g, 0.22 mol) was added.Slowly warming to 50-55C under nitrogen protection, completely dissolved solids,Potassium bicarbonate 48 g was added in portions over 60-80 minutes. After the addition, the reaction is incubated at 50-55C for 2-3 hours.The disappearance of the raw material point monitored by TLC represents the end of the reaction.After the reaction was completed, insoluble material was removed by hot filtration, and the resulting filtrate was slowly cooled to -5C.A large number of white solids precipitated, and 100 ml of deionized water was added dropwise to the reaction flask over 1-2 hours to crystallize sufficiently.And remove inorganic salts. After deionized water is added, it is crystallized at -5C for 2 hours.Filter and filter cake washed with 100 ml of 95% ice-cold ethanol.The resulting compound (IIIb) was dried under vacuum and dried at a temperature of 50-55C for 24 hours.124 g of compound (IIIb) was obtained in a yield of 86%.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione ,and how the biochemistry of the body works.

Reference:
Patent; Zhejiang Xin Donggang Pharmaceutical Co., Ltd.; Yan Jianbo; Ma Liangxiu; Lin Yi; Hong Huabin; (16 pag.)CN107739344; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

September 3,2021 News The Shocking Revelation of 4320-91-6

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 2H-1,2,3-Triazole-2-acetic acid is helpful to your research.

Reference of 4320-91-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 4320-91-6, name is 2H-1,2,3-Triazole-2-acetic acid, molecular formula is C4H5N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Oxalyl chloride (0. 95 mL, 11 mmol) was added dropwise to a suspension OF 2- (1-1, 2, 3-triazolyl)) acetic acid (Step B, 1.27 g, 10 mmol) in 10 ML CH2C12 containing 0.05 ML DMF. Vigorous effervescence was observed. This mixture was stirred at room temperature for 4 h and cooled TO-78C. A solution OF N. O- dimethylhydroxylamine hydrochloride (1.2 g, 13 mmol) and diisopropylethyl amine (6.0 mL, 35 mmol) in 10 ML CH2CL2 was added slowly over 3 min. The mixture was then allowed to warm to room temperature and stirred overnight. The reaction mixture was then diluted with ether until no additional precipitate appeared. The solid was filtered and washed with ether. The filtrate was concentrated and the residue was purified on silica gel using EtOAc as solvent to provide the title compound as amorphous solid. 1H NMR (400 MHz, CDC13) : S 3.252 (s, 3H0, 3.812 (s, 3H), 5.379 (s, 2H), 7.753 & 7.761 (s’s, 2H).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 2H-1,2,3-Triazole-2-acetic acid is helpful to your research.

Reference:
Patent; MERCK & CO., INC.; WO2005/27837; (2005); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

September 3,2021 News Research on new synthetic routes about 7411-23-6

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole, in my other articles.

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7411-23-6

To a solution of 3,5-dibromo-lh-l,2,4-triazole (150.0 g, 661.2 mmol) in tetrahydrofuran (1500 mL) was slowly added p-toluenesulfonic acid (17.1 g, 99.2 mmol), followed by 3,4-dihydro-2h-pyran (166.9 g, 1983.6 mmol) at 0 C. After addition, the reaction mixture was heated at 70 C for 3 h and concentrated under reduced pressure. The residue was poured into water (500 mL) and adjusted to pH = 9 by addition of saturated aqueous sodium bicarbonate. The resulting mixture was extracted with ethyl acetate (3 x 400 mL). The combined organic layers were dried over sodium sulfate and concentrated under reduce pressure. The resulting crude product was washed with methanol (2 x 50 mL), dried under reduced pressure to give crude 3,5-dibromo-l-tetrahydropyran-2-yl-l,2,4-triazole (155 g, 75%) as a white solid. NMR (400 MHz, CDCl3) delta 5.49 – 5.46 (m, 1H), 4.12 – 3.99 (m, 1H), 3.72 – 3.61 (m, 1H), 2.38 – 2.26 (m, 1H), 2.18 – 2.07 (m, 1H), 1.98 – 1.90 (m, 1H), 1.78 – 1.60 (m, 3H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; PATEL, Snahel; HAMILTON, Gregory; ZHAO, Guiling; CHEN, Huifen; DANIELS, Blake; STIVALA, Craig; (358 pag.)WO2019/12063; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/3/21 News Why Are Children Getting Addicted To 4928-87-4

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1,2,4-Triazole-3-carboxylic acid is helpful to your research.

Application of 4928-87-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: The tail group amines Ar-NH2 (Ar a-d) (19.5 mmol,1.1 equiv) were added to a stirring solution of 1,2,4-triazole-3-carboxylic acid 12 (2.00 g, 17.7 mmol, 1.0 equiv) in dry DMF(30 mL) at room temperature. After 5 min, TBTU (6.0 g, 18.6 mmol,1.0 equiv) and DIPEA (11.0 mL, 61.9 mmol, 3.5 equiv) were added insequence. The resulting solution was stirred at room temperaturefor 16 h. After completion of the reaction, as indicated by TLC, DMFwas removed by rotary evaporation at 30 torr and 70 C. The crudematerial was purified by methods described in each individualentry.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1,2,4-Triazole-3-carboxylic acid is helpful to your research.

Reference:
Article; Chakraborty, Amarraj; Dou, Yali; Gibbons, Garrett S.; Grigsby, Sierrah M.; Lee, Young-Tae; Liao, Chenzhong; Mathew, Bini; Moukha-Chafiq, Omar; Nikolovska-Coleska, Zaneta; Pathak, Vibha; Reynolds, Robert C.; Schuerer, Stephan C.; Snowden, Timothy S.; Umeano, Afoma C.; European Journal of Medicinal Chemistry; vol. 189; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/3/21 News Chemical Properties and Facts of 288-88-0

If you are hungry for even more, make sure to check my other article about 288-88-0, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

To a stirred solution of 4-fluro benzaldehyde (1.0 g, 0.8 mmol) in dry DMF (5 mL), 1 H-1 ,2,4-triazole (660 mg, 0.9 mmol) and K2CO3 (2.2 g, 1.6 mmol) were added at RT and the resulting mixture was stirred overnight at 1 10 C. After completion of reaction, ice water (2 mL) was added and the mixture was extracted with EtOAc (2 x 20 ml_). The combined organic layer was washed with brine (2 ml_), dried over Na2S04 and concentrated under vacuum. The resulting product was used in next step without further purification. Yield: 46% (610 mg, white solid). LCMS: (Method A) 174.1 (M+H), Rt.1.27 min, 67.51 % (Max).

If you are hungry for even more, make sure to check my other article about 288-88-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; WISHART, Grant; KULKARNI, Santosh S.; RAKESH, Paul; (338 pag.)WO2020/39027; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/3/21 News Some tips on 7170-01-6

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).To a mixture of 4-(2-amino-pyrimidin-5-yl)-Nl-ieri-butyl-benzene-l,2-diamine (270 mg, 1.05 mmol) and impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg) in DMF (15.0 mL) is added Oxone (650 mg, 1.06 mmol) in H20 (5.0 mL). The reaction mixture is stirred at room temperature for 1.5 hours and then quenched with saturated sodium thiosulfate aq. (25 mL). The quenched reaction mixture is extracted with EtOAc (25 mL x2) and the combined organic layers are washed with H20 (50 mL x2), dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in CH2C12 as the eluent to afford an impure mixture of 5-(2-amino- pyrimidin-5-yl)- l-ieri-butyl-2-[5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-phenyl]-2,3- dihydro-lH-benzimidazol-2-ol plus regiosiomer (25 mg).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/3/2021 News Analyzing the synthesis route of 40253-47-2

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 40253-47-2, and we look forward to future research findings.

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 40253-47-2, name is Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 40253-47-2

To a solution of ethyl 5-methyl-lH-l,2,4-triazole-3-carboxylate (1.0 g, 6.44 mmol) and l-bromo-3-(bromomethyl)benzene (1.77 g, 7.08 mmol) in THF (32 mL), K2CO3 (1.78 g, 12.88 mmol) was added. The mixture was stirred at 50°C for 18 h, and then the reaction was filtered under vacuum. The solvent was removed under reduced pressure and the crude product was purified on a Biotage pre-packed silica gel column (EtOAc:Hexane 12percent to 100percent EtOAc) to afford ethyl l-(3- bromobenzyl)-5-methyl-lH-l,2,4-triazole-3-carboxylate (1.25 g, 60percent) as a viscous oil. MS(ES+) Ci3H14BrN302 requires: 323, 325 found: 324, 326 [M+H]+(l :l).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 40253-47-2, and we look forward to future research findings.

Reference:
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; CARROLL, Christopher, L.; MARSZALEK, Joe; CZAKO, Barbara; JOHNSON, Ryan; THEROFF, Jay; WO2014/31936; (2014); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/3/2021 News Brief introduction of 288-36-8

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,3-Triazole

To a mixture of 2-bromo-4-fluorobenzoic acid (30 g, 137 mmol), cesium carbonate (89.26 g, 274 mmol), and copper(I) iodide (5.27 g, 27.4 mmol) in DMF (200 mL) were added N,N? -dimethylcyclohexane- 1 ,2-diamine (3.7 mL,23 .3 mmol) and 1H- 1,2,3 -triazole (18.92 g, 274 mmol). The resulting mixture was stirred at 110 C overnight, cooled, concentrated in vacuo, and diluted with water (150 mL). The aqueous layer was extracted withEtOAc (300 mL x 3). The aqueous layer was acidified with 2 N HC1 and extracted with EtOAc(300 ml. x 4). The combined organic layers were washed with brine (150 mL x 3), dried overNa2SO4, filtered, and concentrated in vacuo. The residue was purified by silica gel columnchromatography gel (petroleum ether: EtOAc = 100: 1 5 : 1) to provide the title compound asa solid. LRMS m/z (M+H) 208.0 found, 208.0 required.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; REGER, Thomas, S.; SKUDLAREK, Jason, W.; (50 pag.)WO2016/100162; (2016); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/3/2021 News Simple exploration of 4928-87-4

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 4928-87-4, and we look forward to future research findings.

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1,2,4-Triazole-3-carboxylic acid

A mixture of lH-1 ,2,4-triazole-3-carboxylic acid (8 mg, 0.07 mmol), EDCI (20 mg, 0.1 mmol), and 1-hydroxybenzotriazole (9 mg, 0.07 mmol) in DMF (1 mL) was slightly warmed up to a homogeneous solution which was added into a stirred solution of 5~(8- azabicyclo [3.2.1 ]octan-3 -yl)-7-(6-phenylpyridin-3 -yl)-2,4-dihydro- 1 H-[ 1 ,3]oxazino[5 ,4- e]pyrazolo[l,5-a]pyrimidine TFA salt (0.07 mmol) and N,N-diisopropylethylamine (37 mu,, 0.2 mmol) in DMF (2mL). It was stirred further for 10 min at room temperature. This crude compound was purified by HPLC to afford (3-(7-(6-phenylpyridin-3-yl)-2,4-dihydro-l FIJI, 3]oxazino[5,4-e]pyrazolo[l,5-a]pyrimidin-5-yl)-8-azabicyclo[3.2. l]octan-8-yl)(4H-l?2,4- triazol-3-yl)methanone. LCMS t = 3.20 Min (10 min run, UV254nm). Mass calculated for M+ H 534.0, observed LC/MS m/z 534.0 (M+H).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 4928-87-4, and we look forward to future research findings.

Reference:
Patent; SCHERING CORPORATION; MENG, Zhaoyang; NAN, Yang; PATEL, Mehul; SIDDIQUI, M. Arshad; REDDY, Panduranga Adulla, P.; SUN, Binyuan; WO2012/27240; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics