Month: September 2021

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-88-0

To a 500 ml three-necked flask, 21.0 g of 1,2,4-triazole was added.And adding 150.0 g of diethylene glycol monomethyl ether and 7.0 g of potassium hydroxide,Heating in an oil bath, controlling the internal temperature at 100-110 C;then,60.0 g of the reaction starting material A was slowly added dropwise, and the dropping time was 1 h.After the completion of the dropwise addition, the mixture was stirred at 100 to 120 C for 10 hours, and the reaction of the starting material A was monitored by TLC.Then, the reaction solution was allowed to stand to cool to room temperature, incubated in an ice water bath for 1 h, suction filtration, and the filtered mother liquor was collected and applied, and the filter cake was taken.Rinse with 50 ml of a mixed solvent of n-hexane and petroleum ether.Drying in vacuo, the product quality of tebuconazole is 68.6g.The purity was 98.2%, and the total yield was 92.1%.The tebuconazole product characterization data is the same as in Example 1.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; Shanghai Sheng Nong Biochemical Goods Co., Ltd.; Ye Zhenjun; Wang Tao; Xu Haiyan; Bi Qiang; Han Haiping; (6 pag.)CN109705048; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 138624-97-2, name is 1-Benzyl-1H-1,2,4-triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 138624-97-2

A mixture of 7-amino-i ,5-dimethyl- 8 ,9-dthydro-7H-pyrido [3,2-b] azepine-2,6-dione(20 mg, 0.09 mmol), i-(3-dimethylaminopropyl)-3-ethylcarbodiimidehydrochloride (26 mg,0.14 mmol), 1 -hydroxybenzotriazole (18.3 mg, 0.14 mmol) and 1 -benzyl- 1 ,2,4-triazole-3-carboxylic acid (22 mg, 0.11 mmol) in N,N-dimethylformamide (1 mL) was stuffed at 25 Cfor 12 h. The mixture was concentrated under reduced pressure. The residue was purified byRP-HPLC (acetonitrile 20-50%/0.05% ammonium hydroxide in water) to afford the racemicmaterial (30 mg), which was separated by chiral SFC to give arbitrarily assigned:1 -benzyl-N- [(7R)- 1 ,5-dimethyl-2,6-dioxo- 8 ,9-dihydro-7H-pyrido [3,2-b] azepin-7-yl] – i,2,4-triazole-3-carboxamide (Peak 1, retention time 2.38 mm) (8.1 mg, 25%) as white solids.?H NMR (400 MHz, CD3OD) oe 8.56 (s, 1H), 7.58 (d, J = 10.0 Hz, 1H), 7.36 – 7.34 (m, 5H),6.57 (d, J = 9.2 Hz, 1H), 5.47 (s, 2H), 4.67 – 4.62 (m, 1H), 3.68 (s, 3H), 3.29 (s, 3H), 3.06 -3.05 (m, 1H), 2.88 – 2.84 (m, 1H), 2.75 – 2.72 (m, 1H), 2.27 – 2.22 (m, 1H). LCMS RT =0.695 mm, mlz = 407.1 [M + H]. LCMS (5 to 95% acetonitrile in water + 0.03%trifluoacetic acid over 1.5 mins) retention time 0.695 mi ESI+ found [M+H] =407.1.1 -benzyl-N-[(7S)- 1 ,5-dimethyl-2,6-dioxo-8,9-dihydro-7H-pyrido[3,2-b] azepin-7-yl] -i,2,4-triazole-3-carboxamide (Peak 2, retention time 3.639 mm) (5.3 mg, 17%) as white solids. ?H NMR (400 MHz, CD3OD) oe 8.56 (s, 1H), 7.58 (d, J = 9.6 Hz, 1H), 7.37 – 7.33 (m, 5H), 6.57 (d, J = 10.0 Hz, 1H), 5.47 (s, 2H), 4.67 – 4.62 (m, 1H), 3.68 (s, 3H), 3.29 (s, 3H),3.10 – 3.05 (m, 1H), 2.88 – 2.86 (m, 1H), 2.75 – 2.72 (m, 1H), 2.27 – 2.22 (m, 1H). LCMS RT = 1.202 mi mlz = 407.2 [M + H]. LCMS (10 to 80% acetonitrile in water + 0.05%ammonium hydroxide over 3 mins) retention time 1.202 mi ESI+ found [M+H] = 407.2. SFC condition: Column: Chiralpak AD-3 100×4.6mm I.D., 3um Mobile phase: A:C02 B: methanol (0.05% DEA) Gradient: from 5% to 40% of B in 5mm and hold 40% for 2.5 mm, then 5% of B for 2.5 mm Flow rate: 2.8mL/min Column temp.: 40 C.

If you are hungry for even more, make sure to check my other article about 138624-97-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; PATEL, Snahel; (105 pag.)WO2018/73193; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7411-23-6, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Triethylamine (2.0 mL, 14.5 mmol) was slowly added to a solution of 3,5-dibromo-1H-1,2,4-triazole (1.1 g, 4.83 mmol), 2-[tert- butoxycarbonyl(methyl)amino]ethyl methanesulfonate (1467 mg, 5.8 mmol) in DMF (22 mL). The reaction mixture was them stirred at 65 oC for 18 h. The reaction mixture was quenched with NH4Cl (sat. aq.) and extracted with DCM. The combined organic fractions were dried with a phase separator and reduced in vacuo. The residue was dissolved in DCM and reduced onto silica. Purification by silica column chromatography eluting with 0-5% MeOH inDCM afforded 2-(3,5-dibromo-1,2,4-triazol-1-yl)-N-methyl-ethanamine (644 mg, 2.27 mmol, 47% yield) as an orange liquid. UPLC-MS (ES+, Method A): 1.70 min, m/z 283.9 [M+H]+.

I am very proud of our efforts over the past few months and hope to 3,5-Dibromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 46′ 2-(lH-l,2,4-triazol-l-yl)benzonitrile: A suspension of 2-fluorobenzylnitrile(3.0 g, 25 mmol) and 1,2,4-triazole sodium complex (2.4 g, 27 mmol) were stirred in THF (7 mL) and DMF (14 mL) at 95 C for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta: 8.74 (IH, s), 8.16 (IH, s), 7.82 (IH, dd, J= 4.9,1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (IH, m). LCMS [M+H]+ calcd for C9H7N4: 171.06; found: 171.12.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about Sodium 1,2,4-triazol-1-ide is helpful to your research.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/58646; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 15988-11-1, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, molecular formula is C8H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of dimedone (1 mmol), aldehyde or isatin (1 mmol) and 4-phenylurazole (1 mmol), and catalyst (0.01 g, 5 mol%) in water (5 mL) was refluxed. After completion of the reaction that was monitored by TLC (EtOAc:n-hexane, 1:3), the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water and cooled with ethanol to afford the pure product.

In the meantime we’ve collected together some recent articles in this area about 15988-11-1 to whet your appetite. Happy reading!

Reference:
Article; Seyyedhamzeh, Mozhdeh; Shaabani, Shabnam; Hamidzad Sangachin, Mona; Shaabani, Ahmad; Research on Chemical Intermediates; vol. 42; 4; (2016); p. 2845 – 2855;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 626248-56-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 626248-56-4, name is 3-(2H-1,2,3-Triazol-2-yl)aniline, molecular formula is C8H8N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To 130 mg (0.37 mmol) of 2, 118 mg of the 3-(2H-l,2,3-triazol-2-yl)aniline (1.2 eq), 107 mg NaCvBu (3 eq), 85 mg Pd(dba)2 (0.4 eq), and 53 mg Q-Phos (Aldrich 675784, 0.2 eq) was added ~5 mL dry toluene. The reaction mixture was degassed with Ar for 10 min and then refluxed under argon at 110C for 3 hours. The reaction mixture was cooled and diluted with EtOAc, washed with water and brine, dried over MgSC^, and concentrated. The resulting oil was dissolved in a 3: 1 mixture of TFA/H2S04. The mixture was heated to 80C for 1 hour and then cooled to room temperature. Approximately 10 mL H20 was added to the mixture and the resulting solution was subjected to reverse phase preparative HPLC. Product was isolated by utilizing a mobile phase with 0.1% TFA in water as solvent A and 0.1% TFA in acetonitrile as solvent B and eluting with a 15% to 50% B mixture over 10 minutes.[0527] Yield: 23 mg. UV: 265, 306 nm. M+H found for C^H^NsO: 393.3. NMR(CD3OD): 8.96 (IH, br), 7.96 (2H, s), 7.82 (IH, d, J=8.8Hz), 7.67 (IH, d, J=6.0Hz), 7.42 (IH, t, J=6.0Hz), 7.17 (IH, d, J=5.6Hz), 6.18 (IH, d, J=8.8Hz), 4.78 (IH, br), 3.65 (IH, br), 1.90-1.45 (8H, m) ppm.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 3-(2H-1,2,3-Triazol-2-yl)aniline is helpful to your research.

Reference:
Patent; PORTOLA PHARMACEUTICALS, INC.; JIA, Zhaozhong, J.; SONG, Yonghong; XU, Qing; KANE, Brian; BAUER, Shawn, M.; PANDEY, Anjali; WO2012/61418; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of intermediate 42 (0.288, 0.58 mmol) was dissolved in 50 mmol of HOBT(: 1 (0.178, 0.89 mmol)EDCl(0.118, 0.83 mmol)After stirring, lH-1,2,4-triazole-3-carboxylic acid (0.078, 0.62 mmol) was added at room temperatureStirring 12h, TLC detection, the end of the reaction, the liquid spin the crude product, the crude product by silica gel G column chromatography [eluent (methanol: dichloromethaneHexane: aqueous ammonia = 50: 500: 1 (nu: nu: nu)] to give 0.23 g of the title compound of Example 30-a, yield 36%

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1,2,4-Triazole-3-carboxylic acid, hurry up and to see.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 40253-47-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 40253-47-2, name is Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate, molecular formula is C6H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of ethyl 5-methyl-lH-l,2,4-triazole-3-carboxylate (1.0 g, 6.44 mmol) and l-bromo-3-(bromomethyl)benzene (1.77 g, 7.08 mmol) in THF (32 mL), K2CO3 (1.78 g, 12.88 mmol) was added. The mixture was stirred at 50°C for 18 h then filtered. The filtrate was concentrated under reduced pressure and the crude product was purified on a Biotage pre-packed silica gel column with a gradient of 12percent to 100percent EtOAc:Hexanes to afford ethyl l-(3-bromobenzyl)-5-methyl-lH- l,2,4-triazole-3-carboxylate (1.25 g, 60percent) as a viscous oil. MS(ES+) Ci3H14BrN302 requires: 323, 325 found: 324, 326 [M+H]+(l :l).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate.

Reference:
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; CARROLL, Christopher, L.; MARSZALEK, Joe; CZAKO, Barbara; JOHNSON, Ryan; THEROFF, Jay; WO2014/31936; (2014); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,3-Triazole

A mixture of 2,3-dichloro-5-nitropyridine (50 g, 259.08 mmol), 1H-1,2,3-triazole (19.683 g, 284.99 mmol), potassium carbonate (46.549 g, 336.81 mmol) and CH3CN (200 mL) was heated to 40 C. and stirred overnight. Ethyl acetate (500 mL) was added. The mixture was washed with water (500 mL*2) and brine (500 mL), dried over anhydrous Na2SO4, filtered, and concentrated to dryness under reduced pressure. The residue was triturated with DCM (100 mL), filtered, and the solid was collected to afford compound 1g (40 g, 68%) as an off-white solid. LC-MS: (ES, m/z): [M+1]+ 225.9. 1H NMR (400 MHz, DMSO-d6) delta ppm 9.40 (d, J=2.0 Hz, 1H), 9.15 (d, J=2.0 Hz, 1H), 8.33 (s, 2H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; Janssen Pharmaceutica NV; LU, Tianbao; CONNOLLY, Peter J.; CUMMINGS, Maxwell David; DIELS, Gaston Stanislas Marcella; THURING, Jan Willem; PHILIPPAR, Ulrike; EDWARDS, James Patrick; BERTHELOT, Didier Jean-Claude; WU, Tongfei; (65 pag.)US2019/381012; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 135302-13-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 135302-13-5, name is 3-Methoxy-4-methyl-1H-1,2,4-triazol-5(4H)-one, molecular formula is C4H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

STR130 A mixture of 1.3 g (0.01 mol) of 5-methoxy-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-one, 0.1 g of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), 1.0 g (0.01 mol) of tertbutyl isocyanate and 50 ml of acetonitrile is stirred for 12 hours at 20 C. and subsequently concentrated under a water pump vacuum. The residue is taken up in methylene chloride, and the mixture is washed with water, dried with magnesium sulphate and filtered. The filtrate is concentrated under a water pump vacuum, the residue is brought to crystallisation by trituration with petroleum ether, and the product is isolated by filtration with suction. 1.4 g (61% Of theory) of 2-tert-butyl-amino-carbonyl-5-methoxy-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-one of melting point 167 C. are obtained.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3-Methoxy-4-methyl-1H-1,2,4-triazol-5(4H)-one.

Reference:
Patent; Bayer Aktiengesellschaft; US5541337; (1996); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics