Day: September 13, 2021

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 138624-97-2, name is 1-Benzyl-1H-1,2,4-triazole-3-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C10H9N3O2

M-10 (25 mg) was dissolved in 2 mL of dichloromethane and 1 mL of trifluoroacetic acid, and after 1 hour of reaction, the solvent was spin-dried to obtain the intermediate amine. Subsequently, the intermediate was dissolved in DMSO (1 mL), and 35 mg of acid-6 was added (the acid was purchased commercially, or the preparation of the acid please refer to: CN 105121432 A, J. Med. Chem. 2017, 60, 1247 ), HATU (56mg), DIPEA (60mg), the reaction was overnight, added water and ethyl acetate extraction, the organic layer was collected, dried over anhydrous sodium sulfate, vacuum rotary evaporation to remove the solvent, HPLC separation to obtain compound ZB-R-5.

If you are hungry for even more, make sure to check my other article about 138624-97-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Chinese Academy Of Sciences Shanghai Pharmaceutical Institute; Zhou Bing; Tang Wei; Yang Xiangbo; Lu Huimin; Gao Mengying; Yang Yaxi; Feng Huijin; (69 pag.)CN111138448; (2020); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 1H-1,2,3-triazole (0.524 mL, 9.05 mmol) in water (5 mL) at 50 C was added bromine (0.625 mL, 12.13 mmol). The reaction was stirred at 50 C for 90 minutes, whereupon the precipitated product was filtered off. This material was air-dried on the filter. Another aliquot of bromine (0.625 mL, 12.13 mmol) was added to the mother liquor, which was stirred at room temperature overnight. After stirring overnight, collected the solid product by filtration. Filtered off a total of 4,5-dibromo-1H-1,2,3-triazole (1.83 g, 7.91 mmol, 87 % yield) as a white solid. Carried on as-is to alkylation.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; SPERGEL, Steven H.; PITTS, William J.; MERTZMAN, Michael E.; MOSLIN, Ryan M.; SHERWOOD, Trevor C.; GILMORE, John L.; DYCKMAN, Alaric J.; (0 pag.)WO2020/92196; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1001401-62-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

[( ?)-3-(3-lodo-benzyl)-morpholin-4-yl]-(2-[1 ,2,3]triazol-2-yl-phenyl)-methanone (B-28)A solution of (R)-3-(3-iodo-benzyl)-morpholine B-5 (100 mg, 0.33 mmol) and DIPEA (57 muIota_, 0.33 mmol) in DMF (1.5 mL) was added to a RT solution of 2-(2H-1 ,2,3-triazol-2-yl)benzoic acid E-2 (62 mg, 0.33 mmol), TBTU (1 1 1 mg, 0.35 mmol) and DIPEA (57 muIota_, 0.33 mmol) in DMF (1.5 ml) under argon and the resulting mixture was stirred for 22h. The reaction mixture was quenched with sat. aq. NaHC03 and stirred for 10 min before being diluted with water and extracted with DCM (3x). The combined organic extracts were washed with 2M aq . NaOH (1x), 2M aq. HCI (1 x) and brine (1x), dried over Na2S04, filtered and evaporated in vacuo. The crude product was purified by prep. HPLC (method F) to give the title compound as a white solid. LC-MS D: tR = 0.93 min; [M+H]+ = 474.91 .

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, hurry up and to see.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOLLI, Martin; BOSS, Christoph; BROTSCHI, Christine; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2013/68935; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 7343-34-2

General procedure: The example reported for derivatives 22/23 find general application for all the other N-linked heterocycles. Sodium hydride 60percent dispersed in mineral oil was added at 0 °C to a solution of 3-(trifluoromethyl)-1H-pyrazole in dry DMF. The mixture was stirred at this temperature for 15 min, then for an additional 5 min at room temperature. A solution of derivative 45 in dry DMF (2 ml) was then added and the mixture was stirred at 50 °C for 3 h 30 min. After cooling to RT, a saturated NH4Cl solution was added and the mixture was extracted with Et2O (2.x.). The organic phase was washed with brine, dried over Na2SO4 and concentrated in vacuo. The residue was purified by Silica gel flash chromatography (gradient ethyl acetate in cyclohexane from 5 to 40percent) to give the intermediate BOC protected compound 22 and the intermediate BOC protected compound 23.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 7343-34-2, and we look forward to future research findings.

Reference:
Article; Micheli, Fabrizio; Cavanni, Paolo; Bettati, Michela; Bonanomi, Giorgio; Di Fabio, Romano; Fazzolari, Elettra; Marchioro, Carla; Roscic, Maja; Tarsi, Luca; Visentini, Filippo; Zonzini, Laura; Worby, Angela; Bioorganic and Medicinal Chemistry; vol. 19; 11; (2011); p. 3451 – 3461;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C3H4ClN3O

Step 1(e): 3-chloro-5-({2-oxo-1-[(5-oxo-4,5-dihydro-1H-1,2,4-triazol-3-yl)methyl]-4-(trifluoromethyl)-1,2-dihydropyridin-3-yl}oxy)benzonitrile (1-6) A suspension of the 3-chloro-5-{[2-hydroxy-4-(trifluoromethyl)pyridin-3-yl]oxy}benzonitrile (1-4; 2.00 g; 6.36 mmol), 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (1-5; 0.849 g; 6.36 mmol) and K2CO3 (0.878 g; 6.36 mmol) in DMF (32 mL) was stirred for 2 hours at room temperature, at which point LCMS analysis indicated complete conversion. The mixture was diluted with 200 mL Me-THF and washed with 150 mL 1:1:1 H2O:brine:saturated aqueous NH4Cl, then further washed with 2.x.150 mL 1:1 H2O:brine. The aqueous fractions were further extracted with 150 mL Me-THF, then the combined organic extracts were dried (Na2SO4) and concentrated in vacuo. Purification by ISCO CombiFlash (80 g column; dry load; 100:0 to 90:10 EtOAc:EtOH over 25 minutes) provided the title compound (1-6) as a white solid. 1HNMR (400 MHz, DMSO): delta 11.46 (s, 1 H); 11.39 (s, 1 H); 7.93 (d, J=7.3 Hz, 1 H); 7.76 (s, 1 H); 7.58 (s, 1 H); 7.51 (s, 1 H); 6.67 (d, J=7.3 Hz, 1 H); 5.02 (s, 2 H).

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one help many people in the next few years.

Reference:
Patent; Burch, Jason; Cote, Bernard; Nguyen, Natalie; Li, Chun Sing; St-Onge, Miguel; Gauvreau, Danny; US2011/245296; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

1,2,3-Triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol),Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol),Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were sequentially added into a 100 mL single-necked round bottom flask, and the mixture was gradually heated to 100 C. under a nitrogen atmosphere for reaction for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were combined and dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated to dryness under reduced pressure and subjected to column chromatography Purification (dichloromethane / methanol (v / v) = 50/1) afforded the title compound (yellow solid, 2.76 g, 68%).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,3-Triazole, in my other articles.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 6523-49-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, molecular formula is C8H8N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of formamidine from Step 1 (150 mg) and 4-triazolyl-aniline (88 mg, leq) in AcOH (2ml) was heated to 80 for 16 h. Cooled, concentrated and cautiously treated with sodium bicarbonate (aq). The resulting solid was isolated by filtration, washed with water then DCM:EtOH:NH3 (20:8:1) added and refiltered. The filtrate was concentrated until a precipitate formed which was filtered, washed with ether and dried to give the title compound (82 mg, 34 %). 1U NMR delta 10.0 (IH, s), 9.18 (IH, s), 8.75 (IH, s), 8.54 (IH, s), 8.12 (2H, m),7.97 (IH, m), 7.92 (2H, m), 7.78 (3H, m), 7.66 (IH, m), 7.53 (IH, m); LC-MS rt 2.52 m/z 401 ES+.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 4-(1,2,4-Triazol-1-yl)aniline.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-88-0, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 91: Preparation of 4-(lH-l,2,4-triazol-l-yl)benzaldehyde (DI5) To a stirring solution of 4-fluorobenzaldehyde (10.0 g, 80.6 mmol) in DMF (150 mL) were added K2CO3 (13.3 g, 96.7 mmol) and 1,2,4- triazole (6.67 g, 96.7 mmol) and the resultant reaction mixture was stirred at 120 C for 6 h. After completion of reaction (by TLC), the reaction mixture was diluted with H20 and extracted with EtOAc (3 xlOO mL). The combined EtOAc layer was washed with H20 and brine, dried over Na2S04, and concentrated under reduced pressure to afford the title compound as a solid (9.0 g, 65%): mp 145-149 C: ]H NMR (400 MHz, CDC13) delta 10.08 (s, IH), 8.70 (s, IH), 8.16 (s, IH), 8.06 (d, J = 8.0 Hz, 2H), 7.92 (d, J = 8.0 Hz, 2H); ESIMS m/z 173.9 ([M+H]+).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,4-Triazole, hurry up and to see.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 217448-86-7, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 8; Synthesis of compound (I): 1-(2,6-Difluorobenzyl)-1H-1,2,3-triazole-4-carboxyamide (Rufinamide) Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate (II) (10.6 g, 41.9 mmoles), prepared as reported in Example 7, is dissolved in methanol (10 ml) and treated at room temperature under stirring with a 30% ammonia aqueous solution (40 ml), then the reaction mixture is refluxed and kept under stirring for 3 hours. The mixture is cooled to 20C, then diluted with water, filtered, and the resulting white solid is washed with water and dried in a static dryer at 50C. Rufinamide (8.7 g) is obtained as a crystalline white solid in 87% yield. 1H NMR (400 MHz, DMSO-d6), delta ppm: 8.56 (s, 1 H), 7.87 (bs, 1H), 7.60-7.43 (m, 2H), 7.20 (m, 2H), 5.72 (s, 2H).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate.

Reference:
Patent; Dipharma Francis S.r.l.; EP2230234; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C8H7N3O2

General procedure: Dimedone (0.14 g, 1 mmol), benzaldehyde (0.1 g, 1 mmol), and 4-phenylurazole (0.177 g, 1 mmol) were mixed with PEG-SO3H (0.6 g, 0.1 mmol) and the obtained mixture was stirred magnetically at 80 C for 40 min. After the completion of the reaction warm water (20 mL) was added and the mixture stirred for about 5 min. The insoluble crude product was filtered and recrystallized from EtOH/H2O 4:1 and the pure product was obtained (0.352 g, 91%). In order to recover the catalyst, the filtrate was dried under reduced pressure and recovered catalyst was washed with diethyl ether and reused after drying under reduced pressure. The equivalent procedure was used for the synthesis of triazolo[1,2-a]indazole-tetraones.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 15988-11-1

Reference:
Article; Hasaninejad, Alireza; Zare, Abdolkarim; Shekouhy, Mohsen; Tetrahedron; vol. 67; 2; (2011); p. 390 – 400;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics