Day: August 19, 2021

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

[0774] 3H-1,2,3-triazole-5-carboxylic acid (2.5 mg, 22f.tmol) was combined with HATU (8.4 mg, 22 flillOI) in DMF(0.3 mL) and stirred for 10 minutes; Et3N (1 eq.) was addedand the mixture was stirred for 1 minute. Compound 2 (22f.tmol) was dissolved in DMF (0.5 mL) and Et3N (3.1 f.LL, 22f.tmol) was added, followed by addition of the activated acidsolution. The mixture was stirred for 30 minutes and concentratedto yieldCompound3, which was carried to the next stepwithout purification.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 16681-70-2, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1533519-84-4, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, molecular formula is C15H13N3S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

In a 100 ml three-necked flask equipped with a stirrer and a thermometer, 25 ml of DMF was added, the intermediate (III)2.67 g, stirred at room temperature, 1.45 g of potassium carbonate was added, and 1.61 g of methyl bromoacetate was added dropwise at 25 C,Stirring was continued for 3 hours; 50 ml of water was added and extracted with ethyl acetate 50 ml x3 to combine the organic phase,The ethyl acetate was concentrated and concentrated, and 50 ml of methanol was added thereto. The crystals were recrystallized, filtered and dried to give 3.22 g of product,Namely intermediate (IV), yield 99.5%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, hurry up and to see.

Reference:
Patent; Chengdu Baoyu Pharmaceutical Co., Ltd.; Lei, Lang; Li, Shanwei; Xiong, Bo; (10 pag.)CN105906576; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of (3S,6R)-6-methylpiperidin-3-ol (2.36 g, 20.5 mmol), 2-(2H- 1,2,3- triazol-2-yl)benzoic acid (4.65 g, 24.6 mmol), EDC (7.86 g, 41.0 mmol), l-hydroxy-7- azabenzotriazole (5.58 g, 41.0 mmol), and triethylamine (8.57 mL, 61.5 mmol) in DMF (130 mL) was stirred at 50 C overnight, then diluted with saturated aqueous sodium bicarbonate and extracted 5x with ethyl acetate. The organics were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-100% ethyl acetate in hexanes), providing the titled compound as a peach- colored solid. LRMS m/z (Mu+Eta) 287.4 found, 287.1 required.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 1001401-62-2

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/95108; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 1186050-58-7

Example 1 : CIP (76 mg, 0.27 mmol) is added to a stirred mixture of A-1 (48 mg, 0.25 mmol), B-1 (60 mg, 0.21 mmol) and DIPEA (109 muIota_, 0.63 mmol) in dry ACN (2.0 mL) at RT. After 16 h the reaction is treated with ACN/water and purified by preparative LCMS (using a solvent gradient H20/ACN with NH4OH) to afford 50 mg of compound Example 1. ESI-MS: 420 [M+Na]+; HPLC (Rt): 1.02 min (method G). For some examples the reaction times are adapted: 4h for Example 7; 1 h for Example 9; 2h at 60C for Example 16:

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 1186050-58-7

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta; NICHOLSON, Janet Rachel; PEKCEC, Anton; SCHEUERER, Stefan; (69 pag.)WO2017/178341; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of EE-1 (10 g, 144.79 mmol) in water (100 mL) is added EE-2 (13.73 g, 173.75 mmol) dropwise at 0 C and the reaction mixture is stirred at 0 C for 7 hours. The reaction mixture is filtered and extracted with diethyl ether. The combined organics are concentrated in vacuo to yield EE-3.

In the meantime we’ve collected together some recent articles in this area about 1H-1,2,3-Triazole to whet your appetite. Happy reading!

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; HUGHES, Robert Owen; LI, Xiang; NEMOTO, Peter Allen; SMITH KEENAN, Lana Louise; WU, Lifen; XIONG, Zhaoming; (65 pag.)WO2018/111803; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

K. (2S,4R)-5-Biphenyl-4-yl-2-hydroxymethyl-2-methyl-4-[(3H-[1,2,3]triazole-4-carbonyl)-amino]-pentanoic acid propyl ester (R4=H; R7=-(CH2)2CH3) (2S,4R)-4-Amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid (76 mg, 242 mumol) in MeCN (0.4 mL, 8 mmol) and 4 M HCl in 1,4-dioxane (242 muL, 969 mumol) was combined with propan-1-ol (0.5 mL) at 60 C. The resulting mixture was stirred until solid precipitation was observed (~30 minutes). The solvent was evaporated under vacuum and the solids were azeotroped in toluene and dried under vacuum. 1,2,3-Triazole-4-carboxylic acid (0.0274 g, 0.242 mmol), DIPEA (169 muL, 969 mumol) and HATU (92 mg, 242 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with the dried solids, predissolved in DMF (0.2 mL) and DIPEA (0.5 eq.). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product was purified by preparative HPLC and lyophilized to yield the title compound (24 mg; purity 95%). MS m/z [M+H]+ calc’d for C25H30N4O4, 451.23. found 451.4.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-[1,2,3]Triazole-4-carboxylic acid, in my other articles.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 13423-60-4, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, molecular formula is C8H7N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(L) (0.1 mmol) and AgNO3 (0.1 mmo) were stirred in 10 mL of waterAfter half an hour of filtration, the filtrate was colorless. A week after evaporation at room temperature for a single crystal X-ray diffraction of colorless crystals. Yield:55%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Phenyl-1H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; Tianjin Normal University; Wang, Ying; (10 pag.)CN104610288; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 61-82-5

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 61-82-5.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C2H3N3

In the reactor,Add 250mL of acetone,Stirring,26.2 g of 2-iodo-5-methylbenzoic acid,Then 34.5 g of potassium carbonate was added,0.38 g copper iodide (Cul),1,2,3-triazole 7.6g.External temperature was raised to 70 C,During the heating process, a large amount of gas is generated,The reaction was refluxed for 5 hours.Then the reaction mixture was distilled under reduced pressure, the reaction system is more viscous, add 30mL of water, continue to reduce the steam distillation to no acetone (no acetone gas phase). 300mL of water was added to the residue after distillation, and 6mo 1 / L hydrochloric acid was added dropwise at room temperature to adjust the pH of the system to 1-2, resulting in a khaki-colored suspension liquid. Stirred for 15 minutes, filtered, washed with water three times,Each 50mL. The resulting solid was dried at 70 C in vacuo to dryness,Have pale green solid 19.45g,For crude compound (1-1), the purity was 95.20%.With stirring, 7.5 kg of acetone, 0.94 kg of crude compound (1-1) and 0.194 kg of sodium hydroxide were added to the reaction kettle. Stirred at 20 C-30 C for 14 hours. Centrifugation, The filter cake was washed 3 times with acetone, each time 3kg. The resulting solid was transferred to the reaction kettle , 5.65 kg of water was added, 0.14 kg of diatomaceous earth was added and stirred for 1 hour. Filtration, the filtrate was transferred to the reaction kettle, hydrochloric acid was added dropwise to adjust the pH to 1-2, a large amount of white solid formed and stirred for 1 hour. Filtered, the filter cake was washed with water three times, each time 3kg. The resulting solid was dried at 60 C in vacuo to dryness, 0.71 kg white solid, represents Compound (I-1), purity 99.97%, Isomeric compound (1-2) less than 0.1%.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Fan Yuping; (6 pag.)CN104649983; (2018); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4-Phenyl-1,2,4-triazolidine-3,5-dione

General procedure: A mixture of malononitrile (1.0 mmol), aromatic aldehyde (1.0 mmol), 4-ar ylurazole (1.0 mmol), and nano-ZrO2(20 mol %) was heated at 100C for 30-40 min. After completion of the reaction as indicated by TLC, the reaction mixture was cooled to room temperature. The solid residue was dissolved in hot ethanol and centrifuged to separate the catalyst. By recrystallization from ethanol, pure products were obtained.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 15988-11-1

Reference:
Article; Anaraki-Ardakani, Hossein; Heidari-Rakati, Tayebe; Oriental Journal of Chemistry; vol. 32; 3; (2016); p. 1625 – 1629;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics